AttributeKey07: Shank Dia.
Products with this attribute (344 total)
0.060" Min Bore DIA x 0.250" (1/4) Max Bore Depth 0.0240" Tooth Width 0.020" Projection x 0.1250" (1/8) Shank DIA x 1.50" (1-1/2) Overall Length x 0.0010" Radius #48-64 - Carbide UN Thread Right Hand, AlTiN Coated
0.180" Min Bore DIA x 0.350" Max Bore Depth 0.0460" Tooth Width 0.040" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0020" Radius #27-56 - Carbide UN Thread Right Hand, AlTiN Coated
10.70MM COOLANT DRILL 10XD-KTX-XV
11/64" HSS 135 Deg. Jobber Length Drill Bit
1400157508
27/64" HSS 135 Deg. Jobber Length Drill Bit
333HD HSS MRO JOBBER DRILL TiN 135D 17/64 inch
Ball End Mill, AlTiN, 0.250" Shank dia.
Ball End Mill, Carbide, 0.0781"Milling dia
Carbide Drill, 12.30 mm Size, 140 Degrees Point Angle, Solid Carbide, TiAlN Finish, Straight Shank
Carbide End Mill, Dia 8mm, Cut L 22mm
Carbide End Mill,12mm dia.,18.00mm Cut
Cgs Tool
Cgs Tool
Cgs Tool
Cgs Tool
Cgs Tool
Chucking Reamer, Carbide, TiAlN, Metric, 5.03 mm
Chucking Reamer, Cobalt, Bright (Uncoated), Straight, Wire, #26
Chucking Reamer, Cobalt, Bright (Uncoated), Straight, Wire, #4
Chucking Reamer, Cobalt, Bright (Uncoated), Straight, Wire, #43
Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Decimal Inch, 13/32 in
Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Decimal Inch, 21/64 in
Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Decimal Inch, 7/16 in
Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Fractional Inch, 25/64 in
Chucking Reamer,#52,4 Flute,HSS
Chucking Reamer,#70,3 Flute,Cobalt
Chucking Reamer,11mm,6 Flute,Cobalt
Chucking Reamer,4.50mm Size,80.00mm L
Chucking Reamer,5/64 In,4 Flute,Carbide
Chucking Reamer,9/16 In,6 Flute,Carbide
Chucking Reamer,R,6 Flute,HSS
Collet Chuck, ER25, Taper Shank
Collet Chuck, SK25, Taper Shank
Coolant Fed Drill, 12.2mm, 140, Carbide
Coolant Fed Drill, 12mm, 140, Carbide
Coolant Fed Drill, 13.8mm, 140, Carbide
Coolant Fed Drill, 15.3mm, 140, Carbide
Coolant Fed Drill, 15.4mm, 140, Carbide
Corner Radius End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 1/4 in, 2 1/2 in, 5 in
Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 2 in, 4 in
Corner Radius End Mill, 1/4 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 3/4 in, 2 1/2 in
Corner Radius End Mill, 10.00 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat, Metric, 0.45mm, 11.00 mm, 66.00 mm
Corner Radius End Mill, 16.00mm Milling Dia., Carbide, TiAlN, Metric, 0.1200 in, 5/8 in, 3 5/8 in
Corner Radius End Mill, 20.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Metric, 0.50mm, 38.00 mm, 115.00 mm
Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1600 in, 25/32 in, 130.00mm
Corner Radius End Mill, 20.00mm Milling Dia., Metric, 4.00mm, 38.00mm, 104.00mm
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 7/8 in, 2 1/2 in
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1/2 in, 2 in
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 3/4 in, 2 1/2 in
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, TiN, Straight, Fractional Inch, 0.12 in, 1/2 in, 4 in
Corner Radius End Mill, 5/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.03 in, 3/4 in, 4 in
Corner Radius End Mill, Carbide, 63.00mm L
Drill America
Drill, ST FL, 5,558MM/.2188/ 5xD CO
Drill/End Mill, 2 & 4 Flute, 0.4375" (7/16) Cutter dia, Length of Cut: 1"
End Mill, AlTiN, 0.625" Shank dia., Carbide
End Mill, ZrN, 0.500" Shank dia., Carbide
End Mill,0.3125 in. Milling Dia.,5A02
End Mill,AlTiN,1.0000 in Millng Dia,4V05
END MILL,CARBIDE,TICN,1/4
Erickson
Erickson
Erickson
Erickson
Erickson
Erickson
Erickson
Erickson
Erickson
Erickson
Erickson
Erickson
Erickson
Erickson
Erickson
Erickson
Exchangeable Drill Tip, P600x
Extra Long Drill Bit, Drill Bit Size 11.50 mm, Drill Bit Point Angle 140 Degrees , Self-Centering Point, Carbide, TiAlN+AlCrN, Material Grade - Machining WJ30EJ, Maximum Drilling Depth 264.00 mm, Metric, 20xD
Extra Long Drill Bit, Drill Bit Size 14.00 mm, Drill Bit Point Angle 140 Degrees , Self-Centering Point, Carbide, TiAlN+AlCrN, Material Grade - Machining WJ30EJ, Maximum Drilling Depth 252.00 mm, Metric, 16xD
Extra Long Drill Bit, Drill Bit Size 6.00 mm, Drill Bit Point Angle 140 Degrees , Self-Centering Point, Carbide, TiAlN+AlCrN, Material Grade - Machining WJ30EJ, Maximum Drilling Depth 120.00 mm, Metric, 16xD
Extra Long Drill Bit, Drill Bit Size 9.80 mm, Drill Bit Point Angle 140 Degrees , Self-Centering Point, Carbide, TiAlN+AlCrN, Material Grade - Machining WJ30EJ, Maximum Drilling Depth 220.00 mm, Metric, 20xD
Indexable Profiling End Mill, Max. Cutting Dia. 0.9840 in, Depth of Cut 1.1020 in, Shank Dia. 0.9840 in, Overall Length 5-1/8 in, Compatible Hardware FS923 T8 Clamping Screw, Cutting Application Copy Milling
Indexable Profiling End Mill, Max. Cutting Dia. 3/8 in, Depth of Cut 0.1970 in, Shank Dia. 1/2 in, Overall Length 5-1/8 in, Compatible Hardware FS390 Torx 15, Cutting Application Copy Milling
Indexable Profiling End Mill, Max. Cutting Dia. 5/8 in, Depth of Cut 0.4330 in, Shank Dia. 0.5710 in, Overall Length 1.6930 in, Compatible Hardware FS1454 T8IP Clamping Screw, Coolant Fed Coolant Through, Cutting Application Copy Milling
Indexable Square Shoulder End Mill, Max. Cutting Dia. 25 mm, Shank Dia. 22.00 mm, Threaded, Overall Length 58.00 mm, ANSI Code F4042R.T22.025.Z03.10, Compatible Hardware FS1454 T8IP Clamping Screw, Connection Size T22, Coolant Fed Coolant Through
Indexable Square Shoulder End Mill, Max. Cutting Dia. 25 mm, Shank Dia. 25.00 mm, Straight, Overall Length 200.00 mm, ANSI Code F4042.Z25.025.Z03.11, Compatible Hardware FS1456 T9IP Clamping Screw, Coolant Fed Coolant Through
Indexable Square Shoulder End Mill, Max. Cutting Dia. 40 mm, Shank Dia. 36.00 mm, Threaded, Overall Length 75.00 mm, ANSI Code F4042.T36.040.Z03.15, Compatible Hardware FS1453 T15IP Clamping Screw, Connection Size T36, Coolant Fed Coolant Through
Indexable Square Shoulder End Mill, Max. Cutting Dia. 5/8 in, Shank Dia. 5/8 in, Straight, Overall Length 7 in, ANSI Code F4042R.UZ15.015.Z02.10, Compatible Hardware FS1454 T8IP Clamping Screw, Coolant Fed Coolant Through
Jobber Drill, Carbide, 140 Deg, XPL Grade
Jobber Drill, Carbide, 140 Deg, XPL Grade
Kelch
Km Systems
Km Systems
Km Systems
Lifting Eye Bolt, Finish Black Oxide, Material Steel, Thread Size M36-4.0, Eye Inside Diameter 70 mm, Eye Outside Diameter 126 mm, Working Load Limit 46,000 (N), System of Measurement Metric, Material Grade/Class Not Graded, Pack Size Small Pack
Melin Tool Co
Melin Tool Co
Melin Tool Co
Melin Tool Co
First
Previous
1
2
3
4
Next
Last