AttributeKey08: Measurement System

Products with this attribute (198 total)

"NIBCO, INC." PC6032 NIBCO 9026150PCI 335034 Press Female Adapter, 2"
0100075PL Hex Nut, Steel, Plain, 3/4" Rod from CADDY FASTENERS ERICO PRODUCTS
040E3704EG #40 3/8X4 EG COACH SCREW ROD from PHD Manufacturing, Inc.
0500332044 146 3/4X6FT ZD CONT THRD ROD from ASC Engineered Solutions
090N1200PL #90 12 PL STANDARD U-BOLT W/N from PHD Manufacturing, Inc.
090N1600PL #90 16 PL STANDARD U-BOLT W/N from PHD Manufacturing, Inc.
090N2000PL #90 20 PL STANDARD U-BOLT W/N from PHD Manufacturing, Inc.
090N9160EG #91 16 EG STANDARD U-BOLT W/N from PHD Manufacturing, Inc.
150M0100S4 150M Standard U-Bolt, S304, 1" Pipe, 1.315" (33.4 mm) OD, 1/4" Rod from CADDY FASTENERS ERICO PRODUCTS
150M1000HD 150M Standard U-Bolt, Steel, HD, 10" Pipe, 10.75" (273.1 mm) OD, 3/4" Rod from CADDY FASTENERS ERICO PRODUCTS
9044 WR RAT COMB 1-9/16 from COOPER TOOLS
A Fresh Take On Farmhouse Style. The Collection Of Pendants Features A Variety Of Contemporary Finish Combinations. A Simple Form With A Modern Twist.
A927W001P100 Deck Screw, #14 Screw, 2" (50.8 mm) Screw from CADDY FASTENERS ERICO PRODUCTS
An easy design that works well with any architectural style. The collections features a large acrylic globe atop a matte black body. A cast aluminum constructions ensures it will stand up against the elements. Traditional One Light Outdoor Wall Mount from Havana collection in Matte Black finish
ANNULAR CUTTER, 1
ANNULAR CUTTER, 2 IN CUTTER DIAMETER, 1 IN MAX CUTTING DEPTH, PILOT PIN INCLUDED
ANNULAR CUTTER,1-13/16
ANNULAR CUTTER,1-3/4
ANNULAR CUTTER,1-3/8
ANNULAR CUTTER,1-5/16
ANNULAR CUTTER,1-7/16
ANNULAR CUTTER,1-7/8
ANNULAR CUTTER,1/2
ANNULAR CUTTER,3/4
Baldwin Hardware Corp. 060026024 0600 260 24 FLUSH BOLT W/24 ROD
Boneham
Boneham
Boneham
Callahan draws inspiration from Farmhouse decor. Hidden within this vintage frame is a modern LED light source that delivers energy-efficient performance. The inner surface of the shade is accented with a contrasting finish to complete the Nostalgic look. Additionally, the full reflector provides illumination that is Compliant with dark sky requirements for full cutoff lighting.
Carbide Drill Mill,3/4In,4FL,Single,4In
Carbide Drill Mill,5/16In,4FL,Single
Carbide End Mill,11/64In,2FL,Double
Carbide End Mill,15/32In,2FL,Single,3In
Carbide End Mill,15/32In,4FL,Single,3In
Carbide End Mill,5/64In,4FL,Single
CORE BIT EXTENSION, 7
Corner Radius End Mill, 1 1/2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 6 in, 8 1/2 in
Corner Radius End Mill, 1 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 1 3/4 in, 4 1/2 in
Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 2 in, 4 in
Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 9/16 in, 6 in
Corner Radius End Mill, 1/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.015 in, 1/2 in, 4 in
Corner Radius End Mill, 1/4 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 3/4 in, 2 1/2 in
Corner Radius End Mill, 1/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 3/8 in, 4 in
Corner Radius End Mill, 1/8 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.01 in, 1/2 in, 1 1/2 in
Corner Radius End Mill, 10.00 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat, Metric, 0.45mm, 11.00 mm, 66.00 mm
Corner Radius End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 3 in, 6 3/4 in
Corner Radius End Mill, 20.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Metric, 0.50mm, 38.00 mm, 115.00 mm
Corner Radius End Mill, 20.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Metric, 0.75mm, 38.00 mm, 104.00 mm
Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat, Metric, 0.25mm, 4.00 mm, 50.00 mm
Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.05 in, 3/4 in, 6 in
Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 1 1/2 in, 4 in
Corner Radius End Mill, 3/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 4 in, 6 1/4 in
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 7/8 in, 2 1/2 in
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1/2 in, 2 in
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 3/4 in, 2 1/2 in
Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1 1/4 in, 4 in
Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 1 1/4 in, 3 1/2 in
Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.09 in, 1 1/4 in, 3 1/2 in
CPS20PCSET SCREWDRIVER SET,20PC from COOPER TOOLS
DEWALT DWMT19247 15 Piece 3/8
DWHT62058 008PC DEWALT MAXFIT SCREWDRIVER SET from IRWIN INDUSTRIAL TOOL COMPANY
DWMT72211OSP 001PC COMB. WRENCH 10MM (CWAS) from IRWIN INDUSTRIAL TOOL COMPANY
DWMT72307OSP 001PC RATCHETING COMB. WRENCH 19 from IRWIN INDUSTRIAL TOOL COMPANY
DWMT74138OSP DWMT 3/4IN DR DP IM SKT 15/16IN SAE from IRWIN INDUSTRIAL TOOL COMPANY
DWMT74219 PRODUCT BOX 22PC 3/4 DR RATchet AND ACCY from IRWIN INDUSTRIAL TOOL COMPANY
DWMT74656OSP DWMT 6PT 1/2IN DR DP IM SKT 1-1/16IN SAE from IRWIN INDUSTRIAL TOOL COMPANY
DWMT75103OSP DWMT 6PT 1/2IN DR IM SKT 15 MM from IRWIN INDUSTRIAL TOOL COMPANY
DWMT75110OSP DWMT 6PT 1/2IN DR IM SKT 20 MM from IRWIN INDUSTRIAL TOOL COMPANY
DWMT75122OSP DWMT 6PT 1/2IN DR IM SKT 9/16IN SAE from IRWIN INDUSTRIAL TOOL COMPANY
DWMT75162OSP DWMT 3/4IN DR IM SKT 1-5/16 SAE from IRWIN INDUSTRIAL TOOL COMPANY
DWMT86047OSP 001PC 14DR DEEP SOCKET-06PT-3/8 from IRWIN INDUSTRIAL TOOL COMPANY
DWMT86101OSP 001PC 14DR SOCKET-06PT-4 from IRWIN INDUSTRIAL TOOL COMPANY
DWMT86103OSP 001PC 14DR SOCKET-06PT-6 from IRWIN INDUSTRIAL TOOL COMPANY
DWMT86105OSP 001PC 14DR SOCKET-06PT-8 from IRWIN INDUSTRIAL TOOL COMPANY
DWMT86322OSP 001PC 38DR DEEP SOCKET-06PT-10 from IRWIN INDUSTRIAL TOOL COMPANY
DWMT86323OSP 001PC 38DR DEEP SOCKET-06PT-11 from IRWIN INDUSTRIAL TOOL COMPANY
DWMT86521OSP 001PC 12DR SOCKET-06PT-21 from IRWIN INDUSTRIAL TOOL COMPANY
E-Z Red EZRMR14XLC 1/4" DRIVE 9" NO FLEX RATCHET (EZR-MR14XLC)
End Mill,0.3125 in. Milling Dia.,5A02
End Mill,0.3125 in. Milling Dia.,5V0S
End Mill,0.5000 in. Milling Dia.,5AN2
End Mill,0.5000 in. Milling Dia.,5AN2
End Mill,0.5000 in. Milling Dia.,5V0E
End Mill,0.5000 in. Milling Dia.,5V0S
End Mill,0.6250 in. Milling Dia.,5V0S
End Mill,0.6250 in. Milling Dia.,5VNE
End Mill,0.7500 in. Milling Dia.,4K02
End Mill,0.7500 in. Milling Dia.,5AN3
End Mill,0.7500 in. Milling Dia.,7V
End Mill,0.7500 in. Milling Dia.,7VNX
End Mill,13/64 in.4 Flutes,TiCN
End Mill,3.00mm Milling Dia.,D000/D010
End Mill,5.00mm4 Flutes,TiCN
End Mill,5/8 3FL 42 SPNF,2-1/2 LOC SQ
End Mill,8.00mm Milling Dia.,4777
End Mill,AlTiN,0.1875 in Millng Dia,4V05
End Mill,AlTiN,0.3125 in Millng Dia,4V05
End Mill,AlTiN,1.0000 in Millng Dia,4V05
Erickson
Erickson