AttributeKey09: Single End/Double End

Products with this attribute (333 total)

Square End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 1/8 in, Overall Length 7 in, Shank Dia. 1 in
Square End Mill, 1.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 1.50 mm, Overall Length 60.00 mm, Shank Dia. 6.00 mm
Square End Mill, 1.40 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 2.10 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm
Square End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 6 in, Shank Dia. 1/2 in
Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia. 1/2 in
Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 6 in, Shank Dia. 1/2 in
Square End Mill, 1/8 in Milling Dia., Bright (Uncoated), Straight, Length of Cut 1/4 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in
Square End Mill, 1/8 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1/4 in, Overall Length 3 in, Shank Dia. 1/8 in
Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 100.00 mm, Shank Dia. 16.00 mm
Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 64.00 mm, Overall Length 141.00 mm, Shank Dia. 16.00 mm
Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 89.00 mm, Shank Dia. 16.00 mm
Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 4 in, Overall Length 7 3/4 in, Shank Dia. 2 in
Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 6 in, Overall Length 9 3/4 in, Shank Dia. 2 in
Square End Mill, 2.00 mm Milling Dia., TiAlN, Straight, Length of Cut 5.00 mm, Overall Length 50.00 mm, Shank Dia. 4.00 mm
Square End Mill, 3.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 4.50 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm
Square End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 in, Overall Length 6 in, Shank Dia. 3/4 in
Square End Mill, 3/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 2 1/4 in, Overall Length 5 in, Shank Dia. 3/4 in
Square End Mill, 7/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 7/8 in
Square End Mill, 8.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 19.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm
Square End Mill, 8.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 16.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm
SQUARE END MILL, CENTRE CUTTING, 4 FLUTES, 3/16 IN MILLING DIAMETER,
Square End Mill,2.500" L,0.375" dia.
Square End Mill,7/64" Cut Length,nACRo
Square End Mill,Unfinished,1.5"L,Carbide
Square End Mill,Unfinished,1.5"L,Carbide
Square End Mill,Unfinished,1.5"L,Carbide
Square End Mill,Unfinished,1.5"L,Carbide
Square End Mill,Unfinished,1.5"L,Carbide
Zoro Select
Zoro Select
Zoro Select
Zoro Select
Zoro Select