AttributeKey12: Material - Machining

Products with this attribute (150 total)

29pc. Bright 118 Degrees Drill Bit Set
ALUMCUTTERS, 5/16
BIT 3/4IN SDS MAX 4-CUTTER
Boneham
Boneham
Center Drill, Plain, Carbide, 60 Degrees , 2.50 mm
CENTRE CUT FINISHER, SQUARE, SINGLE END, R/H, 6 FLUTE, 1 1/4 X 1 X 2 X 4 1/2 INCHES
Chamfer Mill, AlTiN, 3/8" Shank dia.
Chamfer Mill, AlTiN, 3/8" Shank dia.
Chucking Reamer,#16,4 Flute,Carbide
Chucking Reamer,#33,4 Flute,Carbide
Chucking Reamer,#42,4 Flute,Carbide
Chucking Reamer,#5,4 Flute,Carbide
Chucking Reamer,0.0530In,4 Flute,Carbide
Chucking Reamer,0.0900In,4 Flute,Carbide
Chucking Reamer,0.1350In,4 Flute,Carbide
Chucking Reamer,0.1620In,4 Flute,Carbide
Chucking Reamer,0.1920In,4 Flute,Carbide
Chucking Reamer,0.2005In,4 Flute,Carbide
Chucking Reamer,0.2045In,4 Flute,Carbide
Chucking Reamer,0.2285In,4 Flute,Carbide
Chucking Reamer,0.2295In,4 Flute,Carbide
Chucking Reamer,0.3130In,6 Flute,Carbide
Chucking Reamer,0.3700 In,6 Fl,Carbide
Chucking Reamer,0.4000 In,6 Fl,Carbide
Chucking Reamer,0.4750In,4 Flute,Carbide
Chucking Reamer,0.4830In,4 Flute,Carbide
Chucking Reamer,25/64 In,6 Flute,Carbide
Chucking Reamer,5/64 In,4 Flute,Carbide
Chucking Reamer,9/16 In,6 Flute,Carbide
Collet, ER20, Round
Countersink, 100 Degrees , 3/8 in, Cobalt, TiN
Countersink, 90 Degrees , 3/4 in, Cobalt, TiN
Diamond Turning Insert, Diamond, 1/2", 80 Degrees, 1/32"
Diamond Turning Insert, Diamond, 3/8", 35 Degrees, 1/32"
Drill Bushing, Slip-Fit R, 9/64in, 1-3/8inL
DRILL RED SHANK,HSS,BRIGHT,31/64
DRILL SET,HSS,STEAM OXIDE,#1-#60
End Mill Holder Blank, Features 25CrMoV4 Chromium-Molybdenum Steel;Hardened Taper and Flange;Shank with Center Unhardened for Further Machining;Taper and Contact Face Ground, For Use With For Own Manufacturing of Special Tools, Material - Machining High Speed Steel
END MILL, 1/8
END MILL, 1/8
END MILL, 3/16
END MILL, 3/4
END MILL, HSS, 1/16
END MILL, HSS, 1/2
END MILL, HSS, 1/8
END MILL, HSS, 11/32
END MILL, HSS, 11/32
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/32
END MILL, HSS, 3/4
END MILL, HSS, 3/4
END MILL, HSS, 3/8
END MILL, HSS, 3/8
END MILL, HSS, 33/64
END MILL, HSS, 5/16
END MILL, HSS, 7/16
END MILL, HSS, 7/32
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 9/32
END MILL, HSS, 9/32
END MILL, HSS, TICN, 1/2
END MILL, HSS, TICN, 5/8
END MILL, HSS, TIN, 1
END MILL, HSS, TIN, 1
END MILL, HSS,11/16
END MILL, HSS,3/32
END MILL, HSS,3/64
END MILL, HSS,7/16
END MILL, HSS,TICN,1/2
END MILL, HSS,TIN,1/4
END MILL, MULTI-FLUTE, SINGLE-END, 3 3/4 X 5/8 IN
END MILL, MULTI-FLUTE, SINGLE-END, 4 1/2 X 1 1/4 IN
END MILL, MULTI-FLUTE, SINGLE-END, 4 5/8 X 5/8 IN
END MILLGP, 1-1/2
END MILLGP, 13/32
END MILLGP, 13/32
END MILLGP, 7/16
END MILLGP, HSS, 1
END MILLGP, HSS, 1
END MILLGP, HSS, 1/4
END MILLGP, HSS, 1/4
END MILLGP, HSS, 13/32
END MILLGP, HSS, 15/64
END MILLGP, HSS, 2
END MILLGP, HSS, 3/16
END MILLGP, HSS, 5/16
END MILLGP, HSS, 5/8
END MILLGP, HSS, 7/16
END MILLGP, HSS, 7/8
END MILLGP, HSS, 9/16
END MILLGP,HSS,1/4
END MILLGP,HSS,7/16
ENDMILL VARIMILL 1/4X1/4X1-1/4X3.25
Exchangeable Milling Head
FINISHING END MILL, 2 FLUTES, STRAIGHT SHANK, BRIGHT, 1/16 X 2-1/4 X 3/16 IN, HSS