AttributeKey14: Cast Iron (K) Compatibility

Products with this attribute (66 total)

Ball End Mill, 1/4 in Milling Dia., Carbide, nACRo, Non-Coolant Through

Ball End Mill, 10 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 17/64 in Milling Dia., Carbide, TiN, Non-Coolant Through

Ball End Mill, 2 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 4.00mm Dia, Carbide

Ball End Mill, Carbide, 0.0250"Milling dia

Ball End Mill, Carbide, 0.0781"Milling dia

Ball End Mill, Carbide, 0.0937"Milling dia

Ball End Mill, Carbide, 0.0937"Milling dia

Ball End Mill, Carbide, 0.1093"Milling dia

Ball End Mill, Carbide, 0.1875"Milling dia

Ball End Mill, Carbide, 0.80mm Milling dia

Cor. Rad. End Mill, 0.50mm CR, Carbide

Corner Chamfer End Mill, 1 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0197 in, 2 1/4 in

Corner Chamfer End Mill, 1/4" Shank dia.

Corner Chamfer End Mill, 12.00 mm Milling Dia., Carbide, Weldon Flat, Metric, 0.30 mm, 75.00 mm

Corner Chamfer End Mill, 20.00 mm Milling Dia., Carbide, Straight, Metric, 0.50 mm, 38.00 mm

Corner Chamfer End Mill, 4.00 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 11.00 mm

Corner Chamfer End Mill, 8.00 mm Milling Dia., Carbide, Straight, Metric, 0.40 mm, 16.00 mm

Corner Radius End Mill, 0.125" Shank dia.

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 9/16 in, 6 in

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 4.000" L

Corner Radius End Mill,0.625" Shank dia.

Diamond Turning Insert, Chip-Breaker Code ENG, Inscribed Circle 3/8 in, Al203+TiCN, ANSI Code VNMG332ENG, Chip-Breaker Style Double, Clearance Angle 0 Degrees , Coating Process CVD

Diamond Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 1/4 in, Al203+TiCN, ANSI Code DCMT21.52ESU, Chip-Breaker Style Single, Clearance Angle 7 Degrees , Coating Process CVD

End Mill, Uncoated, 0.750" Shank dia.

End Mill,0.2500 in. Milling Dia.,4K03

End Mill,0.7500 in. Milling Dia.,4K02

End Mill,1/16 in.2 Flutes,TiCN

End Mill,1/4 in.4 Flutes,AlTiN

End Mill,5/32 in.4 Flutes,TiN

End Mill,TiAlN,0.5000 in. Milling Dia.

End Mill,TiCN,1.0000 in Milling Dia,6205

G.W. Schultz Tool

G.W. Schultz Tool

Parting and Grooving Insert, Inscribed Circle 5/8 in, ANSI Code CGAR1504300

Square End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 6 in, Shank Dia. 1/2 in

Square Turning Insert, Chip-Breaker Code ENZ, Inscribed Circle 1/2 in, Al203+TiCN

Square Turning Insert, Chip-Breaker Code EUX, Inscribed Circle 1/2 in, Al203+TiCN

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0156 in, Carbide

Turning Insert, CNMG, Carbide, 544 Size