AttributeKey14: List Number

Products with this attribute (167 total)

Screw Machine Drill Bit, 3.38 mm Size, 140 Degrees Point Angle, Solid Carbide, AlCrN Finish

Screw Machine Drill Bit, 5/8" Size, 140 Degrees Point Angle, Solid Carbide, WD1 Finish

Screw Machine Drill Bit, 6.10 mm Size, 140 Degrees Point Angle, Solid Carbide, TiAlN Finish

Screw Machine Drill Bit, 6.86mm Size, 140 Degrees Point Angle, Solid Carbide, WD1 Finish

Screw Machine Drill Bit, 8.70mm Size, 130 Degrees Point Angle, High Speed Steel, Uncoated Finish

Screw Machine Drill Bit, Drill Bit Size 2.55 mm, Drill Bit Point Angle 130 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1004

Screw Machine Drill Bit, Drill Bit Size 3.18 mm, Drill Bit Point Angle 130 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1252

Screw Machine Drill Bit, Drill Bit Size 5.65 mm, Drill Bit Point Angle 120 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.2224

Screw Machine Drill Bit, U Size, 140 Degrees Point Angle, Solid Carbide, AlTiN Finish, Helical Flute

Square End Mill, 0.0200" Milling dia.

Square End Mill, 0.0310" Milling dia.

Square End Mill, 0.0468" Milling dia.

Square End Mill, 0.0625" Milling dia.

Square End Mill, 0.0850" Milling dia.

Square End Mill, 1 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Length of Cut 3 1/4 in, Overall Length 6 in, Shank Dia. 1 in

Square End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 1 in

Square End Mill, 1-1/8" Cut Length, nACRo

Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 6 in, Shank Dia. 1/2 in

Square End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/2 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 64.00 mm, Overall Length 141.00 mm, Shank Dia. 16.00 mm

Square End Mill, 2.00 mm Milling Dia., TiAlN, Straight, Length of Cut 5.00 mm, Overall Length 50.00 mm, Shank Dia. 4.00 mm

Square End Mill, 5/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3/4 in, Overall Length 6 in, Shank Dia. 5/8 in, Neck Dia. 19/32 in

Square End Mill, Unfinished, 1.5"L, Carbide

Square End Mill, Unfinished, 1.5"L, Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Straight Flute Tap, #12-28, Plug, 4 Flutes, UNF

Straight Flute Tap, #2-56, Plug, 3 Flutes, UNC

Tap, 3/4"-10, Modified Bottoming, 4 Flutes, UNC

Tap, 5/8"-11, Plug, 4 Flutes, UNC

Tap, 9/16"-12, Plug, 4 Flutes, UNC

Tap, M16-2.00, Taper, Metric Coarse, 3 Flutes, Bright

Taper Shank Drill Bit, Overall 13.504" L

Taper Shank Drill Bit, Overall 8.346" L

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp