AttributeKey14: Measurement System

Products with this attribute (170 total)

ALUMCUTTERS, 5/16
Boneham
Boring Bar, Boring, Bright (Uncoated), 0.0570 in
Center Drill, Plain, Carbide, 60 Degrees , 2.50 mm
CENTRE CUT FINISHER, SQUARE, SINGLE END, R/H, 6 FLUTE, 1 1/4 X 1 X 2 X 4 1/2 INCHES
Chamfer Mill, Uncoated, 3.00mm Shank dia.
Chamfer Mill, Uncoated, 6.00mm Shank dia.
Chucking Reamer, Carbide, Bright (Uncoated), Metric, 4.98 mm
Chucking Reamer, Carbide, Bright (Uncoated), Metric, 7.50 mm
Chucking Reamer, Carbide, TiAlN, Metric, 5.03 mm
Chucking Reamer,#16,4 Flute,Carbide
Chucking Reamer,#33,4 Flute,Carbide
Chucking Reamer,#42,4 Flute,Carbide
Chucking Reamer,#5,4 Flute,Carbide
Chucking Reamer,0.0530In,4 Flute,Carbide
Chucking Reamer,0.0900In,4 Flute,Carbide
Chucking Reamer,0.1350In,4 Flute,Carbide
Chucking Reamer,0.1620In,4 Flute,Carbide
Chucking Reamer,0.1920In,4 Flute,Carbide
Chucking Reamer,0.2005In,4 Flute,Carbide
Chucking Reamer,0.2045In,4 Flute,Carbide
Chucking Reamer,0.2285In,4 Flute,Carbide
Chucking Reamer,0.2295In,4 Flute,Carbide
Chucking Reamer,0.3130In,6 Flute,Carbide
Chucking Reamer,0.3700 In,6 Fl,Carbide
Chucking Reamer,0.4000 In,6 Fl,Carbide
Chucking Reamer,0.4750In,4 Flute,Carbide
Chucking Reamer,0.4830In,4 Flute,Carbide
Chucking Reamer,25/64 In,6 Flute,Carbide
Chucking Reamer,5/64 In,4 Flute,Carbide
Chucking Reamer,9/16 In,6 Flute,Carbide
Collet, #1, Round, JIS
Collet, ANSI Clutch Drive Tap 19/1, Round, Overall Length 1.8300 in
Collet, ER20, Round
Collet, ER25, Round, Overall Length 35.00mm, ISO 15488
Collet, ER32, Round
Collet, ER40, Round
Collet, ER40, Round
Collet, TG100, Round, Overall Length 2-3/8 in
Collet, TG100, Round, Overall Length 2-3/8 in
Collet,TG50,6.00mm
Countersink, 82 Degrees , 1 1/2 in, High Speed Steel, TiN
Diamond Groove Drill Bushing (DG), Standard Wall, Headless, Fractional Inch, 1/4 in
Diamond Groove Drill Bushing (DG), Standard Wall, Headless, Letter, E
Diamond Groove Drill Bushing (DG), Standard Wall, Headless, Wire, #30
Diamond Groove Drill Bushing (DGM), Standard Wall, Headless, Metric, 4.20 mm
Diamond Turning Insert, Chip-Breaker Code ME, Inscribed Circle 3/8 in, Megacoat, ANSI Code VNGA331S00525ME, Clearance Angle 0 Degrees
Diamond Turning Insert, Square, 1/2", 1/32"
DRILL RED SHANK,HSS,BLACK & GOLD,7/16
DRILL TAP SHANK,HSS,STEAM OXIDE,1-13/64
DRILL TAP SHANK,HSS,STEAM OXIDE,1-27/64
DRILL TAP SHANK,HSS,STEAM OXIDE,1-7/64
DRILL TAP SHANK,HSS,STEAM OXIDE,1-9/32
DRILL TAP SHANK,HSS,STEAM OXIDE,13/32
DRILL TAP SHANK,HSS,STEAM OXIDE,63/64
DRILLSET, COBALT, STRAW/GOLDOX, 9/16
END MILL, 1/8
END MILL, 1/8
END MILL, 3/16
END MILL, 3/4
END MILL, HSS, 1/16
END MILL, HSS, 1/2
END MILL, HSS, 1/8
END MILL, HSS, 11/32
END MILL, HSS, 11/32
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/32
END MILL, HSS, 3/4
END MILL, HSS, 3/4
END MILL, HSS, 3/8
END MILL, HSS, 3/8
END MILL, HSS, 33/64
END MILL, HSS, 5/16
END MILL, HSS, 7/16
END MILL, HSS, 7/32
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 9/32
END MILL, HSS, 9/32
END MILL, HSS, TICN, 1/2
END MILL, HSS, TICN, 5/8
END MILL, HSS, TIN, 1
END MILL, HSS, TIN, 1
END MILL, HSS,11/16
END MILL, HSS,3/32
END MILL, HSS,3/64
END MILL, HSS,7/16
END MILL, HSS,TICN,1/2
END MILL, HSS,TIN,1/4
END MILL, MULTI-FLUTE, SINGLE-END, 3 3/4 X 5/8 IN
END MILL, MULTI-FLUTE, SINGLE-END, 4 1/2 X 1 1/4 IN
END MILL, MULTI-FLUTE, SINGLE-END, 4 5/8 X 5/8 IN
END MILLGP, 1-1/2
END MILLGP, 13/32
END MILLGP, 13/32
END MILLGP, 7/16
END MILLGP, HSS, 1