AttributeKey14: Non Ferrous (N) Compatibility

Products with this attribute (59 total)

Ball End Mill, 3/16" Dia, Carbide

Ball End Mill, AlTiN, 0.250" Shank dia.

Ball End Mill, Carbide, 0.0100"Milling dia

Ball End Mill, Carbide, 0.0550"Milling dia

Ball End Mill, Carbide, 0.1000"Milling dia

Ball End Mill, Carbide, 0.2187"Milling dia

Ball End Mill, Carbide, 2.00mm Milling dia

Ball End Mill, nACo, 0.375" Shank dia.

Corner Chamfer End Mill, 5/8" Shank dia.

Corner Chamfer End Mill, 7.00 mm Milling Dia., Carbide, Weldon Flat, Metric, 0.40 mm, 16.00 mm

Corner Chamfer End Mill,5/8" Shank dia.

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 2 1/2 in, 4 in

Corner Radius End Mill, AlTiN, 2.000" L

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill, Carbide, 4.000" L

Corner Radius End Mill, Carbide, 70.00mm L

Corner Radius End Mill, Carbide, 89.00mm L

Corner Radius End Mill,0.625" Shank dia.

Diamond Turning Insert, Chip-Breaker Code EFC, Inscribed Circle 3/8 in, TiAlN+AlCrN, ANSI Code CCGT32.51EFC, Chip-Breaker Style Single, Clearance Angle 7 Degrees , Coating Process PVD

End Mill, TiCN, 1.0000 in Milling Dia, 6200

End Mill, Uncoated, 0.312" Shank dia.

End Mill, ZrN, 0.312" Shank dia., Carbide

End Mill,0.5000 in. Milling Dia.,5AN2

End Mill,0.5000 in. Milling Dia.,5AN2

End Mill,1 in.2 Flutes,TiN

End Mill,15/64 in.4 Flutes,TiCN

End Mill,5/8 in.4 Flutes,TiN

End Mill,8.00mm Milling Dia.,4777

End Mill,TiCN,1.2500 in Milling Dia,6205

End Mill,Uncoated,0.125" Shank dia.

Square End Mill, 0.0450" Milling dia.

Square End Mill, 0.0468" Milling dia.

Square End Mill, 0.0800" Milling dia.

Square End Mill, 1 in Milling Dia., Bright (Uncoated), Straight, Length of Cut 1 1/4 in, Overall Length 1 1/2 in, Shank Dia. 1 in

Square End Mill, 3.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 4.50 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 4.500 mm

Square End Mill,Unfinished,1.5"L,Carbide

Square Turning Insert, Chip-Breaker Code EEX, Inscribed Circle 5/8 in, TiAlN+AlCrN

Triangle Turning Insert, Chip-Breaker Code EFL, Inscribed Circle 3/8 in, Al203+TiCN

Triangle Turning Insert, Chip-Breaker Code EGE, Inscribed Circle 3/8 in, Al203+TiCN

Triangle Turning Insert, Chip-Breaker Code EME, Inscribed Circle 3/8 in, Al203+TiCN

Triangle Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 1/4 in, Absotech

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0312 in, Carbide