AttributeKey14: Stainless (M) Compatibility

Products with this attribute (63 total)

Ball End Mill, 1/32 in Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 3/32 in Milling Dia., Carbide, nACRo, Non-Coolant Through

Ball End Mill, Carbide, 0.0050"Milling dia

Ball End Mill, Carbide, 0.0350"Milling dia

Ball End Mill, Carbide, 0.0450"Milling dia

Ball End Mill, Carbide, 0.0937"Milling dia

Ball End Mill, Carbide, 0.0937"Milling dia

Ball End Mill,nACo,0.187" Shank dia.

Ball End Mill,nACo,0.250" Shank dia.

Ball End Mill,ZrN,0.625" Shank dia.

Ball Nose Milling Insert, Inscribed Circle 0.190 in, Rake Positive

Chamfer End Mill,1/8 in. Dia,Carbide,209

Cor. Rad. End Mill, 2.50mm CR, Carbide

Corner Chamfer End Mill, 3/4 in Milling Dia., Cobalt, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0140 in, 3 in

Corner Radius End Mill, 0.187" Shank dia.

Corner Radius End Mill, 0.250" Shank dia.

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1 1/2 in, 4 in

Corner Radius End Mill, Carbide, 38.00mm L

Corner Radius End Mill,0.500" Shank dia.

Corner Radius End Mill,0.500" Shank dia.

Corner Radius End Mill,1.000" Shank dia.

Corner Radius End Mill,WS15PE Grade

Diamond Turning Insert, Chip-Breaker Code EUX, Inscribed Circle 1/2 in, Al203+TiCN, ANSI Code CNMG432EUX, Chip-Breaker Style Double, Clearance Angle 0 Degrees , Coating Process CVD

End Mill, 2.0000 in. Milling Dia., 6207

End Mill, 4.00mm Milling Dia., D501

End Mill, AlTiN, 0.125" Shank dia., Carbide

End Mill, Uncoated, 0.375" Shank dia.

End Mill,0.3125 in. Milling Dia.,I2B

End Mill,18.00mm Milling Dia.,4777

End Mill,2.00mm Milling Dia.,7151

End Mill,AlTiN,0.3750 in Millng Dia,4V05

End Mill,AlTiN,0.5000 in Millng Dia,5V0C

End Mill,TiCN,0.6250 in Milling Dia,4K03

G.W. Schultz Tool

Square End Mill, 0.0394" Milling dia.

Square End Mill, 0.0600" Milling dia.

Square End Mill, 0.0625" Milling dia.

Square End Mill, 0.0750" Milling dia.

Square End Mill, 0.1093" Milling dia.

Square End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 1/8 in, Overall Length 7 in, Shank Dia. 1 in

Square End Mill, 1.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 1.50 mm, Overall Length 60.00 mm, Shank Dia. 6.00 mm

Square End Mill, 1.40 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 2.10 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm

Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 6 in, Overall Length 9 3/4 in, Shank Dia. 2 in

Square End Mill,Unfinished,1.5"L,Carbide

Triangle Turning Insert, Triangle, 3/8 in, TNMA, 0.0625 in, Carbide

Turning Insert, Chip-Breaker Code ENZ, Inscribed Circle 1/2 in, Al203+TiCN

Turning Insert, Inscribed Circle 0.625 in