AttributeKey15: Helix Angle

Products with this attribute (90 total)

Ball End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through

Ball End Mill, Carbide, 0.0781"Milling dia

Carb End Mill,1 In,2FL,CC,Uncoated

Carbide End Mill, 1/4, Cut 1-1/8, 3 FLT

Carbide End Mill,7/32In,2FL,Double,3-1/2

Carbide, AlTiN Finish, Ball End Mill - 45XU33|222-001023 - Grainger

Carbide, Bright (Uncoated) Finish, Ball End Mill - 19LM69|220-001001 - Grainger

Carbide, Bright (Uncoated) Finish, Ball End Mill - 19LM73|220-001020 - Grainger

Carbide, Bright (Uncoated) Finish, Corner Chamfer End Mill - 55HJ59|251-004045 - Grainger

CENTRECUT FINISHER, SQUARE, DOUBLE END, R/H, 2FLUTE, 3/21 X 3/16 X 9/32 X 2 1/4 INCHES.

Cor Rad End Mill,10.00mm,Carb,2.00mm rad

Corner Radius End Mill, 0.250" Shank dia.

Corner Radius End Mill, 1 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.12 in, 1 1/8 in, 7 in

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.02 in, 5/8 in, 4 in

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.03 in, 1 in, 3 in

Corner Radius End Mill, 1/4 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 3/4 in, 2 1/2 in

Corner Radius End Mill, 10.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 0.30mm, 22.00 mm, 72.00 mm

Corner Radius End Mill, 10.00mm Milling Dia., TiAlN, Metric, 0.1200 in, 25/64 in, 3 61/64 in

Corner Radius End Mill, 20.00mm Milling Dia., Metric, 4.00mm, 38.00mm, 104.00mm

Corner Radius End Mill, 20.00mm Milling Dia., TAZ, Metric, 0.10mm, 32.00mm, 104.00mm

Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Metric, 0.25mm, 3.00 mm, 57.00 mm

Corner Radius End Mill, 5.75 mm Milling Dia., Carbide, TiAlN, Metric, 0.16mm, 6.00 mm, 54.00 mm

Corner Radius End Mill, 5/16 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.02 in, 1/2 in, 2 1/2 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 3 1/8 in, 5 1/2 in

Corner Radius End Mill, 8.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0200 in, 5/16 in, 2 31/64 in

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill,0.250" Shank dia.

Corner Radius End Mill,0.312" Shank dia.

Corner Radius End Mill,0.500" Shank dia.

Corner Radius End Mill,0.625" Shank dia.

Corner Radius End Mill,WS15PE Grade

Drill Mill, Carbide, AlTiN, 12.000 mm Milling Dia., 120 Degrees

Drill Mill, Carbide, Bright (Uncoated), 5/16 in Milling Dia., 90 Degrees

Drill Mill, Carbide, Bright (Uncoated), 6.000 mm Milling Dia., 90 Degrees

Drill, ST FL, 5,558MM/.2188/ 5xD CO

End Mill, AlTiN, 0.750" Shank dia., Carbide

End Mill,0.1250 in. Milling Dia.,I4S

End Mill,0.5000 in. Milling Dia.,5AN2

End Mill,1.0000 in. Milling Dia.,4K02

End Mill,9.00mm Milling Dia.,D003/D013

End Mill,AlTiN,0.3750 in Millng Dia,4V05

End Mill,nACRo,0.125" Shank dia.,Carbide

Monster Tool Co

Monster Tool Co

SPIRAL POINT TAP, #10-32 THREAD, 13/16 IN THREAD L, 2 11/32 IN L, PLUG, 3 FLUTES

SPIRAL POINT TAP, 5/16

Square End Mill, 0.0156" Milling dia.

Square End Mill, 0.0450" Milling dia.

Square End Mill, 0.0468" Milling dia.

Square End Mill, 0.0750" Milling dia.

Square End Mill, 0.0950" Milling dia.

Square End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 1/8 in, Overall Length 7 in, Shank Dia. 1 in

Square End Mill, 1-1/8" Cut Length, nACRo

Square End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 6 in, Shank Dia. 1/2 in

Square End Mill, 12.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 22.00 mm, Overall Length 130.00 mm, Shank Dia. 12.00 mm, Neck Dia. 11.500 mm

Square End Mill, 20.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 38.00 mm, Overall Length 104.00 mm, Shank Dia. 20.00 mm

SQUARE END MILL, 3 FLUTES,

Square End Mill, 3/4 in Milling Dia., Carbide, TAZ, Straight, Length of Cut 1 37/64 in, Overall Length 4 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable

SQUARE END MILL, 4 FLUTES, 7/16 IN MILLING DIAMETER, 1 IN CUT, 4

SQUARE END MILL, 4 FLUTES, TIN FINISH,

Square End Mill, 5.00 mm Milling Dia., Altima, Straight, Length of Cut 13.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 4.500 mm

Square End Mill, 5/16 in Milling Dia., ZrN, Straight, Length of Cut 27/64 in, Overall Length 2 1/2 in, Shank Dia. 19/64 in

SQUARE END MILL, CENTRE CUTTING, 2 FLUTES,

SQUARE END MILL, CENTRE CUTTING, 2 FLUTES, 5/16 IN MILLING DIAMETER, 13/16 IN CUT

SQUARE END MILL, CENTRE CUTTING, 4 FLUTES,

SQUARE END MILL, CENTRE CUTTING, 4 FLUTES,

SQUARE END MILL, CENTRE CUTTING, 4 FLUTES,

SQUARE END MILL, CENTRE CUTTING, 4 FLUTES,

SQUARE END MILL, CENTRE CUTTING, 4 FLUTES, 25/64 IN MILLING DIAMETER, 1 IN CUT, HSS

SQUARE END MILL, CENTRE CUTTING, 4 FLUTES, 3/16 IN MILLING DIAMETER, 1

Square End Mill,Unfinished,1.5"L,Carbide

STRAIGHT FLUTE TAP,

Walter Prototyp