AttributeKey16: Cast Iron (K) Compatibility

Products with this attribute (74 total)

Ball End Mill, 14 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 2 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 3/32 in Milling Dia., Carbide, nACRo, Non-Coolant Through

Ball End Mill, 7/16" Dia, Carbide

Ball End Mill, Carbide, 0.0300"Milling dia

Ball End Mill, Carbide, 0.0350"Milling dia

Ball End Mill, Carbide, 0.0468"Milling dia

Ball End Mill, Carbide, 0.5000"Milling dia

Carbide End Mill,8.00mm dia,12.00mm Cut

Cor. Rad. End Mill, 1/64" CR, Carbide

Cor. Rad. End Mill, 1/64" CR, Carbide

Corner Radius End Mill, 1 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.06 in, 2 in, 8 in

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.06 in, 5/8 in, 6 in

Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat, Metric, 0.25mm, 4.00 mm, 50.00 mm

Corner Radius End Mill, 3/16 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.015 in, 5/16 in, 2 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 1 1/2 in, 6 in

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill, Carbide, 50.00mm L

Corner Radius End Mill, nACo, 3.000" L

Corner Radius End Mill, WS15PE Grade

Corner Radius End Mill,nACo,5.000" L

Diamond Turning Insert, Chip-Breaker Code EMX, Inscribed Circle 5/8 in, Absotech Platinum, ANSI Code CNMG543EMX, Chip-Breaker Style Double, Clearance Angle 0 Degrees , Coating Process CVD

Diamond Turning Insert, Diamond, 1/4 in, CPMT, 80 Degrees, 1/64 in, Carbide

Diamond Turning Insert, Inscribed Circle 1/2 in, TiCN+Al2O3+Ti, ANSI Code CNMG432, Chip-Breaker Style On Two Sides, Clearance Angle 0 Degrees

Diamond Turning Insert, Inscribed Circle 1/2 in, TiN, ANSI Code 2NC-CNGA433, Clearance Angle 0 Degrees

End Mill, AlTiN, 0.125" Shank dia., Carbide

End Mill, ZrN, 0.312" Shank dia., Carbide

End Mill,0.3125 in. Milling Dia.,5A02

End Mill,0.3125 in. Milling Dia.,I2B

End Mill,0.5000 in. Milling Dia.,5V0S

End Mill,0.7500 in. Milling Dia.,4K02

End Mill,1 in.2 Flutes,TiN

End Mill,7/64 in.2 Flutes,TiCN

End Mill,TiAlN,1.0000 in. Milling Dia.

End Mill,TiCN,0.5000 in Milling Dia,6208

End Mill,TiCN,0.7500 in Milling Dia,6A0R

End Mill,ZrN,0.500" Shank dia.,Carbide

Parting and Grooving Insert, Neutral, Max. Grooving Width 6.00mm, ANSI Code GX24-4E600N05-UA4 WKP13S, Chip-Breaker Code UA4, Clearance Angle 6 Degrees , Coating Process CVD

Square End Mill, 0.0050" Milling dia.

Square End Mill, 0.0350" Milling dia.

Square End Mill, 0.0468" Milling dia.

Square End Mill, 0.0700" Milling dia.

Square End Mill, 0.0850" Milling dia.

Square End Mill, 0.1093" Milling dia.

Square End Mill, 1/8 in Milling Dia., Carbide, TiAlN, Straight, Length of Cut 3/16 in, Overall Length 3 in, Shank Dia. 1/4 in, Neck Dia. 7/64 in

Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 6 in, Overall Length 9 3/4 in, Shank Dia. 2 in

Square End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 in, Overall Length 6 in, Shank Dia. 3/4 in

Square End Mill, Unfinished, 1.5"L, Carbide

Square End Mill,2.500" L,0.375" dia.

Square End Mill,Unfinished,1.5"L,Carbide

Square Milling Insert, Inscribed Circle 13/32 in, Rake Positive

Square Turning Insert, Chip-Breaker Code EME, Inscribed Circle 1 in, Al203+TiCN

Square Turning Insert, Square, 1/4 in, SPG, 1/32 in, Carbide

Triangle Turning Insert, Chip-Breaker Code EUX, Inscribed Circle 3/8 in, Al203+TiCN

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0156 in, Carbide

Turning Insert, CCMT, Carbide, 32.51 Size