AttributeKey16: End Mill Application

Products with this attribute (63 total)

18.000 mm Cutter DIA x 45.00 mm Length of Cut Carbide Square End Mill for Steels and High Temperature Alloys, 5 Flutes

Ball End Mill, 1/4 in Milling Dia., Carbide, nACRo, Non-Coolant Through

Ball End Mill, 12 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Ball End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Ball End Mill, Carbide, 0.0350"Milling dia

Ball End Mill, Carbide, 0.0937"Milling dia

Carbide End Mill, Dia 13mm, Cut L 55mm

Carbide End Mill,3/16In,4FL,Single,2In

Carbide End Mill,5/64In,4FL,Single

Carbide End Mill,5/8In,4FL,Single,3-1/2

Cor Rad End Mill, 1", Carb, 0.0300" rad

Cor Rad End Mill,1/2",Carb,0.0900" rad

Cor. Rad. End Mill, 1/64" CR, Carbide

Cor. Rad. End Mill, 1/64" CR, Carbide

Corner Chamfer End Mill, 10.00 mm Milling Dia., Carbide, Straight, Metric, 0.20 mm, 14.00 mm

Corner Chamfer End Mill, 12.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 26.00 mm

Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Chamfer End Mill, 7/16 in Milling Dia., Cobalt, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0100 in, 1 1/4 in

Corner Radius End Mill, 1 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 1 3/4 in, 4 1/2 in

Corner Radius End Mill, 1 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 1 1/2 in, 4 in

Corner Radius End Mill, 1.00 mm Milling Dia., Carbide, AlTiN, Straight, Metric, 0.10mm, 1.00 mm, 57.00 mm

Corner Radius End Mill, 1.00 mm Milling Dia., Carbide, Metric, 0.50mm, 1.00 mm, 60.00 mm

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 2 1/8 in, 4 in

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 9/16 in, 6 in

Corner Radius End Mill, 10.00 mm Milling Dia., Carbide, Altima, Straight, Metric, 3.00mm, 22.00 mm, 72.00 mm

Corner Radius End Mill, 20.00mm Milling Dia., TAZ, Metric, 0.10mm, 32.00mm, 104.00mm

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 7/8 in, 2 1/2 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.06 in, 1 1/8 in, 2 1/2 in

Corner Radius End Mill, Carbide, 3.000" L

Corner Radius End Mill, Carbide, 38.00mm L

End Mill, 0.1880 in Milling Dia, 7S50/7S51

End Mill, 14.00mm Milling Dia., 577C

End Mill,0.1563 in. Milling Dia.,I2S

End Mill,0.5000 in. Milling Dia.,5AN2

End Mill,0.7500 in. Milling Dia.,5A03

End Mill,5/8 3FL 42 SPNF,2-1/2 LOC SQ

End Mill,5/8 in.4 Flutes,TiN

End Mill,AlTiN,1.0000 in Millng Dia,4S0R

End Mill,nACRo,0.250" Shank dia.,Carbide

End Mill,Uncoated,0.625" Shank dia.

G.W. Schultz Tool

Monster Tool Co

Monster Tool Co

Monster Tool Co

Square End Mill, 0.0937" Milling dia.

Square End Mill, 0.60 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1.80 mm, Overall Length 38.00 mm, Shank Dia. 3.00 mm

Square End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/2 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 64.00 mm, Overall Length 141.00 mm, Shank Dia. 16.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 89.00 mm, Shank Dia. 16.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 35.00 mm, Overall Length 92.00 mm, Shank Dia. 16.00 mm

Square End Mill, 6.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 12.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 5.500 mm

Square End Mill,Unfinished,1.5"L,Carbide