AttributeKey16: Helix Angle

Products with this attribute (56 total)

16.000 mm Cutter DIA x 30.00 mm Length of Cut x 100.00 mm Reach Carbide Square End Mill, 2 Flutes, AlTiN Coated

Ball End Mill, Carbide, 0.0400"Milling dia

Ball End Mill, Carbide, 0.1000"Milling dia

Ball End Mill, Carbide, 0.1093"Milling dia

Carbide End Mill,Dia 14mm,Cut L 30mm

Cor Rad End Mill,3/4",Carb,0.0300" rad

Corner Radius End Mill, 0.375" Shank dia.

Corner Radius End Mill, 0.375" Shank dia.

Corner Radius End Mill, 1/4 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 3/4 in, 2 1/2 in

Corner Radius End Mill, 1/8 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.01 in, 1/2 in, 1 1/2 in

Corner Radius End Mill, 10.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0800 in, 25/64 in, 2 27/32 in

Corner Radius End Mill, 12.00mm Milling Dia., Carbide, TiAlN, Metric, 0.1200 in, 31/64 in, 3 61/64 in

Corner Radius End Mill, 15.90 mm Milling Dia., Carbide, TiAlN, Metric, 0.12 in, 1 1/4 in, 5 in

Corner Radius End Mill, 16.00mm Milling Dia., Carbide, TiAlN, Metric, 0.1200 in, 5/8 in, 3 5/8 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1 1/2 in, 4 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 1 1/2 in, 4 in

Corner Radius End Mill, 4.00mm Milling Dia., Carbide, TiAlN, Metric, 0.50mm, 11.00mm, 57.00mm

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.015 in, 15/16 in, 5 31/32 in

Corner Radius End Mill, 6.00mm Milling Dia., TiAlN, Metric, 0.1200 in, 15/64 in, 2 1/2 in

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 38.00mm L

Corner Radius End Mill, Carbide, 50.00mm L

Corner Radius End Mill, Carbide, 63.00mm L

Corner Radius End Mill, Carbide, 70.00mm L

Corner Radius End Mill,0.187" Shank dia.

Corner Radius End Mill,0.500" Shank dia.

END MILL, MULTI-FLUTE, SINGLE-END, 4 1/2 X 1 1/4 IN

End Mill,AlTiN,1.0000 in Millng Dia,4V05

Jobber Drill, Carbide, 3/8 in., 4 in. L

Monster Tool Co

Monster Tool Co

Monster Tool Co

Sq. End Mill,Single End,Carb,10.00mm

Sq. End Mill,Single End,Carb,6.50mm

Square End Mill, 0.0156" Milling dia.

Square End Mill, 0.0781" Milling dia.

Square End Mill, 0.0937" Milling dia.

Square End Mill, 1.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 1.50 mm, Overall Length 60.00 mm, Shank Dia. 6.00 mm

Square End Mill, 1/2 in Milling Dia., Carbide, nACRo, Weldon Flat, Length of Cut 1 3/4 in, Overall Length 4 1/2 in, Shank Dia. 1/2 in

Square End Mill, 10.00 mm Milling Dia., Carbide, AlTiN, Straight, Length of Cut 22.00 mm, Overall Length 72.00 mm, Shank Dia. 10.00 mm

Square End Mill, 7/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 7/8 in

Square End Mill, 9/16 in Milling Dia., Carbide, AlTiN, Weldon Flat, Length of Cut 1 1/4 in, Overall Length 3 1/2 in, Shank Dia. 9/16 in

SQUARE END MILL, CENTRE CUTTING, 4 FLUTES, 3/16 IN MILLING DIAMETER,

Square End Mill, Unfinished, 1.5"L, Carbide

Square End Mill,5/8" Cut Length,nACRo

STRAIGHT FLUTE TAP, 5/16

STRAIGHT FLUTE TAP, 7/16