AttributeKey16: Stainless (M) Compatibility

Products with this attribute (67 total)

Ball End Mill, 4 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through

Ball End Mill, 4.00mm Dia, Carbide

Ball End Mill, 5 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 5/16 in Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, Carbide, 0.0350"Milling dia

Carbide End Mill,12mm dia.,18.00mm Cut

Chamfer End Mill,3/8 in. Dia,Carbide,209

Corner Chamfer End Mill, 1 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0197 in, 2 1/4 in

Corner Chamfer End Mill, 14.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Radius End Mill, 0.312" Shank dia.

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 1 1/2 in, 4 in

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 1 1/4 in, 3 in

Corner Radius End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 3 in, 6 3/4 in

Corner Radius End Mill, 20.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Metric, 0.75mm, 38.00 mm, 104.00 mm

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 7/8 in, 2 1/2 in

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill,0.625" Shank dia.

Diamond Turning Insert, Chip-Breaker Code 1P, Inscribed Circle 3/8 in, AlTiN, ANSI Code CCMT32521P, Chip-Breaker Style On One Side, Clearance Angle 7 Degrees

Diamond Turning Insert, Chip-Breaker Code EMU, Inscribed Circle 3/8 in, Al203+TiCN, ANSI Code DCMT32.52EMU, Chip-Breaker Style Single, Clearance Angle 7 Degrees , Coating Process CVD

Diamond Turning Insert, Chip-Breaker Code GD, Inscribed Circle 3/8 in, ANSI Code NF-DCMT32.52GD, Chip-Breaker Style Single, Clearance Angle 7 Degrees

Diamond Turning Insert, Diamond, 3/8 in, CPMT, 80 Degrees, 1/32 in, Carbide

Diamond Turning Insert, Inscribed Circle 1/2 in, Bright (Uncoated), ANSI Code 2NU-CNGA432, Clearance Angle 0 Degrees

End Mill, 1.0000 in. Milling Dia., I2C

End Mill, AlTiN, 0.125" Shank dia., Carbide

End Mill, AlTiN, 0.500" Shank dia., Carbide

End Mill, Uncoated, 0.375" Shank dia.

End Mill, Uncoated, 0.625" Shank dia.

End Mill,0.7500 in. Milling Dia.,4K02

End Mill,1 in.4 Flutes,TiN

End Mill,11/16 in.4 Flutes,TiN

End Mill,14.00mm Milling Dia.,DQ13

End Mill,3.00mm Milling Dia.,D000/D010

End Mill,7/16 in.2 Flutes,TiCN

Parallelogram Milling Insert, Inscribed Circle 0.130 in, Positive, AXMT123532PEER-E-ACM300, E, Single Sided, 11 Degrees

Square End Mill, 0.0250" Milling dia.

Square End Mill, 0.0600" Milling dia.

Square End Mill, 0.0625" Milling dia.

Square End Mill, 0.0700" Milling dia.

Square End Mill, 0.1093" Milling dia.

Square End Mill, 0.1875" Milling dia.

Square End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 1 in

Square End Mill, 1-1/8" Cut Length, nACRo

Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 4 in, Overall Length 7 3/4 in, Shank Dia. 2 in

Square Turning Insert, Chip-Breaker Code EUX, Inscribed Circle 1/2 in, Al203+TiCN

Triangle Turning Insert, Inscribed Circle 1/4 in, Bright (Uncoated)

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0468 in, Carbide

Trigon Milling Insert, Inscribed Circle 0.5510 in, Rake -3 Degrees to -8 Degrees Radial;8 Degrees Axial

Turning Insert, DNMG, Carbide, 433 Size

Turning Insert, VNMG, Carbide, 333 Size