AttributeKey17: Cast Iron (K) Compatibility

Products with this attribute (61 total)

Ball End Mill, Carbide, 0.0312"Milling dia

Ball End Mill, Carbide, 0.0468"Milling dia

Ball End Mill, Carbide, 0.0781"Milling dia

Ball End Mill, Carbide, 0.1000"Milling dia

Ball End Mill,nACo,0.250" Shank dia.

Ball End Mill,nACo,0.625" Shank dia.

Carbide End Mill,5/16in dia,13/16in Cut

Corner Radius End Mill, 0.312" Shank dia.

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 1 1/2 in, 4 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1 1/4 in, 4 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 1 1/4 in, 3 1/2 in

Corner Radius End Mill, AX, 63.50mm L

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill, Carbide, 70.00mm L

Corner Radius End Mill,1.000" Shank dia.

Diamond Turning Insert, Diamond, 3/8 in, CCMT, 80 Degrees, 1/32 in, Cermet

Diamond Turning Insert, Diamond, 3/8 in, DNMG, 55 Degrees, 3/64 in, Carbide

Diamond Turning Insert, Diamond, 5/16 in, CPMT, 80 Degrees, 1/32 in, Carbide

Diamond Turning Insert, Inscribed Circle 1/2 in, Bright (Uncoated), ANSI Code 2NU-DNGA431, Clearance Angle 0 Degrees

Diamond Turning Insert, Inscribed Circle 3/8 in, Al203+TiCN, ANSI Code CCMA32.52, Chip-Breaker Style Single, Clearance Angle 7 Degrees , Coating Process CVD

Diamond Turning Insert, Inscribed Circle 3/8 in, ANSI Code NFDCGA32.52, Clearance Angle 7 Degrees

End Mill,0.2500 in. Milling Dia.,4K03

End Mill,0.3125 in. Milling Dia.,5V0S

End Mill,0.6250 in. Milling Dia.,5VNE

End Mill,3/32 in.3 Flutes,TiCN

End Mill,4.00mm Milling Dia.,7050/7060

End Mill,9/64 in.4 Flutes,TiCN

End Mill,AlTiN,1.0000 in Millng Dia,4V05

End Mill,TiAlN,0.5000 in. Milling Dia.

End Mill,Uncoated,0.125" Shank dia.

Square End Mill, 0.0156" Milling dia.

Square End Mill, 0.0250" Milling dia.

Square End Mill, 0.0400" Milling dia.

Square End Mill, 0.60mm Milling dia.

Square End Mill, 3/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 2 1/4 in, Overall Length 5 in, Shank Dia. 3/4 in

Square End Mill, 8.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 16.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm

Square End Mill, Unfinished, 1.5"L, Carbide

Square Turning Insert, Chip-Breaker Code ENG, Inscribed Circle 1/2 in, Al203+TiCN

Triangle Turning Insert, Chip-Breaker Code EUP, Inscribed Circle 1/2 in, Al203+TiCN

Triangle Turning Insert, Inscribed Circle 3/8 in, TiN

Turning Insert, Chip-Breaker Code EGU, Inscribed Circle 3/8 in, Absotech

Turning Insert, CNMG, Carbide, 643 Size

Turning Insert, Inscribed Circle 0.9844 in

Turning Insert, Inscribed Circle 0.9844 in, TiN