AttributeKey17: Helix Angle
Products with this attribute (142 total)
18.000 mm Cutter DIA x 45.00 mm Length of Cut Carbide Square End Mill for Aluminum Alloys, 3 Flutes, ZrN Coated
ALUMCUTTERS, 5/16
BALL END MILL, 2 FLUTES, 0.875 IN MILLING DIAMETER, 2 IN CUT, 4.25 IN LENGTH, HSS
Ball End Mill, Carbide, 0.0250"Milling dia
Ball End Mill, Carbide, 0.0350"Milling dia
Ball End Mill, Carbide, 0.0450"Milling dia
Ball End Mill, Carbide, 0.0900"Milling dia
Ball End Mill, Carbide, 2.50mm Milling dia
Carbide End Mill, Sq, 4Flute, 14mm Mill Dia
Carbide End Mill,15/32In,2FL,Single,3In
CENTRE CUT FINISHER, SQUARE, SINGLE END, R/H, 6 FLUTE, 1 1/4 X 1 X 2 X 4 1/2 INCHES
Cor Rad End Mill,1/2",Carb,0.0900" rad
Cor. Rad. End Mill, 1/32" CR, Carbide
Corner Radius End Mill, 0.187" Shank dia.
Corner Radius End Mill, 0.375" Shank dia.
Corner Radius End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.12 in, 2 1/8 in, 4 in
Corner Radius End Mill, 10.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0800 in, 25/64 in, 2 53/64 in
Corner Radius End Mill, 10.00mm Milling Dia., TiAlN, Metric, 0.1200 in, 25/64 in, 2 53/64 in
Corner Radius End Mill, 12.00 mm Milling Dia., Carbide, Altima, Straight, Metric, 0.50mm, 18.00 mm, 83.00 mm
Corner Radius End Mill, 12.00 mm Milling Dia., Carbide, TiAlN, Metric, 0.08 in, 15/32 in, 3 9/32 in
Corner Radius End Mill, 12.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0200 in, 31/64 in, 3 15/16 in
Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1600 in, 25/32 in, 130.00mm
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 7/8 in, 2 1/2 in
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 3/4 in, 2 1/2 in
Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.09 in, 1 1/4 in, 3 1/2 in
Corner Radius End Mill, 7.94mm Milling Dia., Carbide, TiAlN, Metric, 0.0800 in, 13/16 in, 3 in
Corner Radius End Mill, 7/16 in Milling Dia., Carbide, TiN, Straight, Fractional Inch, 0.06 in, 1 in, 2 3/4 in
Corner Radius End Mill, Carbide, 3.000" L
Corner Radius End Mill, Carbide, 38.00mm L
Corner Radius End Mill, Carbide, 6.000" L
Corner Radius End Mill, Carbide, 89.00mm L
Corner Radius End Mill,0.500" Shank dia.
Corner Radius End Mill,nACo,2.500" L
Corner Radius End Mill,WS15PE Grade
END MILL, 1/8
END MILL, 1/8
End Mill, 3.00mm Milling Dia., 40
END MILL, 3/16
END MILL, 3/4
End Mill, AlTiN, 0.500" Shank dia., Carbide
END MILL, HSS, 1/16
END MILL, HSS, 1/2
END MILL, HSS, 1/8
END MILL, HSS, 11/32
END MILL, HSS, 11/32
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/32
END MILL, HSS, 3/4
END MILL, HSS, 3/4
END MILL, HSS, 3/8
END MILL, HSS, 3/8
END MILL, HSS, 33/64
END MILL, HSS, 5/16
END MILL, HSS, 7/16
END MILL, HSS, 7/32
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 9/32
END MILL, HSS, 9/32
END MILL, HSS, TICN, 1/2
END MILL, HSS, TICN, 5/8
END MILL, HSS, TIN, 1
END MILL, HSS, TIN, 1
END MILL, HSS,11/16
END MILL, HSS,3/32
END MILL, HSS,3/64
END MILL, HSS,7/16
END MILL, HSS,TICN,1/2
END MILL, HSS,TIN,1/4
END MILL, MULTI-FLUTE, SINGLE-END, 3 3/4 X 5/8 IN
END MILL, MULTI-FLUTE, SINGLE-END, 4 5/8 X 5/8 IN
End Mill, TiCN, 0.7500 in Milling Dia, 6200
End Mill,AlTiN,0.5000 in Millng Dia,5V0C
End Mill,TiCN,0.5000 in Milling Dia,4K03
END MILLGP, 1-1/2
END MILLGP, 13/32
END MILLGP, 13/32
END MILLGP, 7/16
END MILLGP, HSS, 1
END MILLGP, HSS, 1
END MILLGP, HSS, 1/4
END MILLGP, HSS, 1/4
END MILLGP, HSS, 13/32
END MILLGP, HSS, 15/64
END MILLGP, HSS, 2
END MILLGP, HSS, 3/16
END MILLGP, HSS, 5/16
END MILLGP, HSS, 5/8
END MILLGP, HSS, 7/16
END MILLGP, HSS, 7/8
END MILLGP, HSS, 9/16
END MILLGP,HSS,1/4
END MILLGP,HSS,7/16
FINISHING END MILL, 2 FLUTES, STRAIGHT SHANK, BRIGHT, 1/16 X 2-1/4 X 3/16 IN, HSS
M.A. Ford
M.A. Ford
M.A. Ford
First
Previous
1
2
Next
Last