AttributeKey17: Steel (P) Compatibility

Products with this attribute (76 total)

Ball End Mill, 10 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 2 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 4 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through

Ball End Mill, AlTiN, 0.250" Shank dia.

Ball End Mill, AlTiN, 0.625" Shank dia.

Ball End Mill, Carbide, 0.0937"Milling dia

Ball End Mill, Carbide, 0.1000"Milling dia

Ball End Mill, Carbide, 0.1250"Milling dia

Ball End Mill, nACo, 1.000" Shank dia.

Carbide End Mill,8.00mm dia,12.00mm Cut

Cor. Rad. End Mill, 1/64" CR, Carbide

Cor. Rad. End Mill, 2.50mm CR, Carbide

Corner Chamfer End Mill, 3/4 in Milling Dia., Cobalt, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0140 in, 3 in

Corner Chamfer End Mill, 7/16 in Milling Dia., Cobalt, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0100 in, 1 1/4 in

Corner Chamfer End Mill, 8.00 mm Milling Dia., Carbide, Straight, Metric, 0.40 mm, 16.00 mm

Corner Chamfer End Mill,3/8" Shank dia.

Corner Radius End Mill, 20.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Metric, 0.50mm, 38.00 mm, 115.00 mm

Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Altima, Straight, Metric, 0.50mm, 8.00 mm, 57.00 mm

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 3 1/8 in, 5 1/2 in

Corner Radius End Mill, AlTiN, 2.000" L

Corner Radius End Mill, AX, 100.00mm L

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill,0.625" Shank dia.

Corner Radius End Mill,WS15PE Grade

Diamond Turning Insert, Chip-Breaker Code EFC, Inscribed Circle 3/8 in, TiAlN+AlCrN, ANSI Code CCGT32.51EFC, Chip-Breaker Style Single, Clearance Angle 7 Degrees , Coating Process PVD

Diamond Turning Insert, Diamond, 1/2 in, DNMG, 55 Degrees, 1/32 in, Carbide

Diamond Turning Insert, Diamond, 3/8 in, CCMX, 80 Degrees, 0.0079 in, PCD

Diamond Turning Insert, Inscribed Circle 1/2 in, Bright (Uncoated), ANSI Code 2NU-CNGA432, Clearance Angle 0 Degrees

End Mill, TiCN, 0.6250 in Milling Dia, 6205

End Mill, Uncoated, 1.000" Shank dia.

End Mill,0.1250 in. Milling Dia.,I4S

End Mill,0.5000 in. Milling Dia.,5AN2

End Mill,0.5000 in. Milling Dia.,5V0S

End Mill,5.00mm Milling Dia.,7585/7595

End Mill,6.00mm Milling Dia.,7585/7595

End Mill,7/16 in.4 Flutes,TiCN

End Mill,AlTiN,0.3125 in Millng Dia,4V05

End Mill,AlTiN,1.0000 in Millng Dia,4S0R

End Mill,TiAlN,0.5000 in. Milling Dia.

End Mill,TiCN,0.7500 in Milling Dia,6A0R

G.W. Schultz Tool

Parting and Grooving Insert, Inscribed Circle 5/8 in, ANSI Code CGAL1504200

Parting and Grooving Insert, Neutral, Max. Grooving Width 6.00mm, ANSI Code GX24-4E600N05-UA4 WKP13S, Chip-Breaker Code UA4, Clearance Angle 6 Degrees , Coating Process CVD

Square End Mill, 0.0200" Milling dia.

Square End Mill, 0.0468" Milling dia.

Square End Mill, 0.0600" Milling dia.

Square End Mill, 0.0700" Milling dia.

Square End Mill, 0.1875" Milling dia.

Square End Mill, 1/8 in Milling Dia., Bright (Uncoated), Straight, Length of Cut 1/4 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 100.00 mm, Shank Dia. 16.00 mm

Square End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 in, Overall Length 6 in, Shank Dia. 3/4 in

Square End Mill, K30F-TICN Grade, Carbide

Square Turning Insert, Chip-Breaker Code EMU, Inscribed Circle 5/8 in, Al203+TiCN

Triangle Turning Insert, Chip-Breaker Code ENK, Inscribed Circle 3/8 in, Al203+TiCN

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0156 in, Carbide

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0468 in, Carbide

Triangle Turning Insert, Triangle, 3/8 in, TPMN, 0.0156 in, Carbide

Turning Insert, CNMG, Carbide, 543 Size

Turning Insert, Inscribed Circle 1/2 in

Turning Insert, VCGT, Carbide, 221 Size