AttributeKey18: Hardened (H) Compatibility

Products with this attribute (70 total)

Ball End Mill, 10 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 7/16 in Milling Dia., Carbide, TiAlN, Non-Coolant Through

Ball End Mill, Carbide, 0.0468"Milling dia

Ball End Mill, Carbide, 0.1875"Milling dia

Ball End Mill, Carbide, 1.00mm Milling dia

Ball End Mill,Uncoated,0.250" Shank dia.

Carbide End Mill,5/16in dia,13/16in Cut

Chamfer End Mill,1/8 in. Dia,Carbide,209

Cor. Rad. End Mill, 1/64" CR, Carbide

Corner Chamfer End Mill, 10.00 mm Milling Dia., Carbide, Straight, Metric, 0.20 mm, 14.00 mm

Corner Chamfer End Mill, 20.00 mm Milling Dia., Carbide, Straight, Metric, 0.50 mm, 38.00 mm

Corner Chamfer End Mill, 4.00 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 11.00 mm

Corner Chamfer End Mill, 4.50 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 14.00 mm

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.02 in, 5/8 in, 4 in

Corner Radius End Mill, 10.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 0.30mm, 22.00 mm, 72.00 mm

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.19 in, 1 3/4 in, 4 in

Corner Radius End Mill, AX, 63.50mm L

Corner Radius End Mill, Carbide, 38.00mm L

Corner Radius End Mill, Carbide, 70.00mm L

Corner Radius End Mill,0.187" Shank dia.

Corner Radius End Mill,0.250" Shank dia.

Corner Radius End Mill,1.000" Shank dia.

Corner Radius End Mill,nACo,3.000" L

Diamond Turning Insert, Chip-Breaker Code MESI, Inscribed Circle 3/8 in, ANSI Code CCGT32.51MESI, Chip-Breaker Style Single, Clearance Angle 7 Degrees

Diamond Turning Insert, Inscribed Circle 1/4 in, Bright (Uncoated), ANSI Code 2NU-DCGA21.51, Clearance Angle 7 Degrees

Diamond Turning Insert, Inscribed Circle 3/8 in, Al203+TiCN, ANSI Code CCMA32.51, Chip-Breaker Style Single, Clearance Angle 7 Degrees , Coating Process CVD

End Mill, 3.00mm Milling Dia., 40

End Mill,0.1250 in. Milling Dia.,I4S

End Mill,0.3125 in. Milling Dia.,5A02

End Mill,0.3750 in. Milling Dia.,I2S

End Mill,0.7500 in. Milling Dia.,5A03

End Mill,1.0000 in. Milling Dia.,4K02

End Mill,11/16 in.4 Flutes,TiN

End Mill,3/32 in.3 Flutes,TiCN

End Mill,AlTiN,1.0000 in Millng Dia,4V05

End Mill,nACRo,0.187" Shank dia.,Carbide

End Mill,nACRo,0.187" Shank dia.,Carbide

End Mill,TiCN,0.6250 in Milling Dia,4K03

Square End Mill, 0.0310" Milling dia.

Square End Mill, 0.0468" Milling dia.

Square End Mill, 0.0550" Milling dia.

Square End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 1/8 in, Overall Length 7 in, Shank Dia. 1 in

Square End Mill, 1/2 in Milling Dia., Carbide, nACRo, Weldon Flat, Length of Cut 1 3/4 in, Overall Length 4 1/2 in, Shank Dia. 1/2 in

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 100.00 mm, Shank Dia. 16.00 mm

Square End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 in, Overall Length 6 in, Shank Dia. 3/4 in

Square End Mill, Unfinished, 1.5"L, Carbide

Square Turning Insert, Chip-Breaker Code EGZ, Inscribed Circle 1/2 in

Triangle Turning Insert, Chip-Breaker Code EFM, Inscribed Circle 7/32 in

Triangle Turning Insert, Chip-Breaker Code ELU, Inscribed Circle 1/4 in, Al203+TiCN

Triangle Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 7/32 in, TiAlN+AlCrN

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0156 in, Carbide

Triangle Turning Insert, Triangle, 3/8 in, TPMN, 0.0156 in, Carbide

Trigon Milling Insert, Inscribed Circle 0.4720 in, Rake -3 Degrees to -8 Degrees Radial;8 Degrees Axial

Turning Insert, CNMG, Carbide, 643 Size

Turning Insert, Inscribed Circle 0.9844 in, TiN