AttributeKey18: Non Ferrous (N) Compatibility

Products with this attribute (72 total)

Ball End Mill, 2 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 3/8" Dia, Carbide

Ball End Mill, Carbide, 0.0550"Milling dia

Ball End Mill, Carbide, 0.30mm Milling dia

Ball End Mill, Uncoated, 0.375" Shank dia.

Ball End Mill,ZrN,0.312" Shank dia.

Cor. Rad. End Mill, 1/16" CR, Carbide

Corner Chamfer End Mill, 7.00 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 20.00 mm

Corner Chamfer End Mill, 8.00 mm Milling Dia., Carbide, Straight, Metric, 0.40 mm, 16.00 mm

Corner Chamfer End Mill,3/8" Shank dia.

Corner Radius End Mill, 0.750" Shank dia.

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 2 in, 4 in

Corner Radius End Mill, 12.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 2.00mm, 18.00 mm, 125.00 mm

Corner Radius End Mill, 20.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Metric, 0.50mm, 38.00 mm, 115.00 mm

Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat, Metric, 0.25mm, 4.00 mm, 50.00 mm

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1 1/2 in, 4 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 1 1/2 in, 5 1/2 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 7/8 in, 2 1/2 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.09 in, 1 1/4 in, 3 1/2 in

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill, Carbide, 3.000" L

Corner Radius End Mill,1.000" Shank dia.

Diamond Turning Insert, Chip-Breaker Code 1P, Inscribed Circle 1/4 in, AlTiN, ANSI Code CCGT215051P, Chip-Breaker Style On One Side, Clearance Angle 7 Degrees

Diamond Turning Insert, Chip-Breaker Code EGE, Inscribed Circle 5/8 in, Absotech Platinum, ANSI Code CNMG543EGE, Chip-Breaker Style Double, Clearance Angle 0 Degrees , Coating Process CVD

Diamond Turning Insert, Chip-Breaker Code ELU, Inscribed Circle 3/8 in, Absotech Platinum, ANSI Code VNMG331ELU, Chip-Breaker Style Double, Clearance Angle 0 Degrees , Coating Process CVD

Diamond Turning Insert, Chip-Breaker Code ME, Inscribed Circle 1/4 in, Megacoat Nano, ANSI Code CCMW2151T00315MEKBN05M, Clearance Angle 7 Degrees

Diamond Turning Insert, Diamond, 1/4 in, CPMT, 80 Degrees, 1/32 in, Cermet

End Mill, Uncoated, 0.125" Shank dia.

End Mill, Uncoated, 0.312" Shank dia.

End Mill, Uncoated, 0.375" Shank dia.

End Mill,1/8 in.3 Flutes,TiCN

End Mill,14.00mm Milling Dia.,DQ13

End Mill,25.00mm Milling Dia.,57N8

End Mill,AlTiN,0.3750 in Millng Dia,4V05

End Mill,TiAlN,0.5000 in. Milling Dia.

G.W. Schultz Tool

Parting and Grooving Insert, Inscribed Circle 5/8 in, ANSI Code CGAL4062

Square End Mill, 0.0200" Milling dia.

Square End Mill, 0.0750" Milling dia.

Square End Mill, 0.0781" Milling dia.

Square End Mill, 1.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 1.50 mm, Overall Length 60.00 mm, Shank Dia. 6.00 mm

Square End Mill, 1/4 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 3/4 in, Overall Length 2 1/2 in, Shank Dia. 1/4 in

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 89.00 mm, Shank Dia. 16.00 mm

Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 4 in, Overall Length 7 3/4 in, Shank Dia. 2 in

Square End Mill, Unfinished, 1.5"L, Carbide

Square End Mill, Unfinished, 1.5"L, Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Triangle Turning Insert, Chip-Breaker Code ENK, Inscribed Circle 3/8 in, Al203+TiCN

Triangle Turning Insert, Chip-Breaker Code FW, Inscribed Circle 3/4 in

Triangle Turning Insert, Inscribed Circle 3/8 in, Bright (Uncoated)

Turning Insert, WNMG, Carbide, 433 Size