AttributeKey19: Cast Iron (K) Compatibility

Products with this attribute (61 total)

Ball End Mill, Carbide, 4.00mm Milling dia

Ball End Mill, nACo, 1.000" Shank dia.

Ball End Mill, Uncoated, 0.375" Shank dia.

Carbide End Mill,1/8in dia,0.2250in Cut

Cor. Rad. End Mill, 1/64" CR, Carbide

Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 90 Degrees , 0.30 mm, 32.00 mm

Corner Chamfer End Mill, 7.00 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 20.00 mm

Corner Radius End Mill, 1.000" Shank dia.

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.08 in, 1 1/4 in, 3 in

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 2 in, 4 in

Corner Radius End Mill, 1/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.015 in, 1/2 in, 4 in

Corner Radius End Mill, 4.00 mm Milling Dia., Carbide, TiAlN, Straight, Metric, 0.20mm, 11.00 mm, 70.00 mm

Corner Radius End Mill, AX, 63.50mm L

Corner Radius End Mill, Carbide, 3.000" L

Corner Radius End Mill,0.500" Shank dia.

Corner Radius End Mill,WS15PE Grade

Diamond Turning Insert, Chip-Breaker Code EMU, Inscribed Circle 3/8 in, Al203+TiCN, ANSI Code DCMT32.52EMU, Chip-Breaker Style Single, Clearance Angle 7 Degrees , Coating Process CVD

Diamond Turning Insert, Chip-Breaker Code LS, Inscribed Circle 3/8 in, Bright (Uncoated), ANSI Code 2NU-DCGA32.51LS, Clearance Angle 7 Degrees

End Mill, 1.0000 in. Milling Dia., I2C

End Mill, 2.0000 in. Milling Dia., 6207

End Mill,0.2500 in. Milling Dia.,5A03

End Mill,0.5000 in. Milling Dia.,5AN2

End Mill,11/16 in.4 Flutes,TiN

End Mill,3.00mm Dia,12.00mm Cut,Carbide

End Mill,3.00mm Milling Dia.,4603

End Mill,3/8 in.4 Flutes,TiCN

End Mill,AlTiN,1.0000 in Millng Dia,4S0R

Square End Mill, 0.0250" Milling dia.

Square End Mill, 0.0310" Milling dia.

Square End Mill, 0.0700" Milling dia.

Square End Mill, 0.1093" Milling dia.

Square End Mill, 0.1250" Milling dia.

Square End Mill, 0.75mm Milling dia.

Square End Mill, 1/8 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1/4 in, Overall Length 3 in, Shank Dia. 1/8 in

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 64.00 mm, Overall Length 141.00 mm, Shank Dia. 16.00 mm

Triangle Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 3/8 in, Al203+TiCN

Triangle Turning Insert, Triangle, 1/4 in, TPMT, 0.0079 in, Carbide

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0312 in, Carbide

Turning Insert, DNMG, Carbide, 432 Size

Turning Insert, Square, 0.375 in., SPMT, 1/32 in, Carbide