AttributeKey19: Hardened (H) Compatibility

Products with this attribute (71 total)

Ball End Mill, 1/4 in Milling Dia., Carbide, nACRo, Non-Coolant Through

Ball End Mill, 2 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 7/16" Dia, Carbide

Ball End Mill, Carbide, 0.0200"Milling dia

Ball End Mill, Carbide, 0.0290"Milling dia

Ball End Mill, Carbide, 0.0300"Milling dia

Ball End Mill, Carbide, 0.0450"Milling dia

Ball End Mill, Carbide, 0.0937"Milling dia

Ball End Mill, Carbide, 0.1250"Milling dia

Ball End Mill,ZrN,0.125" Shank dia.

Corner Chamfer End Mill, 14.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Radius End Mill, 0.187" Shank dia.

Corner Radius End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 3 in, 6 3/4 in

Corner Radius End Mill, 5.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 0.25mm, 7.50 mm, 76.00 mm

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 3 1/8 in, 5 1/2 in

Corner Radius End Mill, AlTiN, 2.000" L

Corner Radius End Mill, AX, 100.00mm L

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill, Carbide, 50.00mm L

Corner Radius End Mill,0.250" Shank dia.

Corner Radius End Mill,nACo,2.000" L

Diamond Turning Insert, Chip-Breaker Code 1P, Inscribed Circle 3/8 in, AlTiN, ANSI Code CCMT32521P, Chip-Breaker Style On One Side, Clearance Angle 7 Degrees

Diamond Turning Insert, Chip-Breaker Code EEG, Inscribed Circle 1/2 in, TiAlN+AlCrN, ANSI Code CNMG433EEG, Chip-Breaker Style Double, Clearance Angle 0 Degrees , Coating Process PVD

Diamond Turning Insert, Chip-Breaker Code FP, Inscribed Circle 1/4 in, TiN, ANSI Code DCMT21505FP, Chip-Breaker Style On One Side, Clearance Angle 7 Degrees

Diamond Turning Insert, Diamond, 3/8 in, DNMG, 55 Degrees, 3/64 in, Carbide

Diamond Turning Insert, Inscribed Circle 3/4 in, Al203+TiCN, ANSI Code CNMA643, Clearance Angle 0 Degrees , Coating Process CVD

End Mill, AlTiN, 0.250" Shank dia., Carbide

End Mill,0.7500 in. Milling Dia.,7VNX

End Mill,18.00mm Milling Dia.,4777

End Mill,7/16 in.2 Flutes,TiCN

End Mill,7/16 in.4 Flutes,TiCN

End Mill,TiAlN,1.0000 in. Milling Dia.

Parting and Grooving Insert, Left Hand, Max. Grooving Width 3/32 in, ANSI Code SG3094L-BN2000

Square End Mill, 0.0700" Milling dia.

Square End Mill, 0.0800" Milling dia.

Square End Mill, 0.1093" Milling dia.

Square End Mill, 0.1406" Milling dia.

Square End Mill, 0.1562" Milling dia.

Square End Mill, 1 in Milling Dia., Bright (Uncoated), Straight, Length of Cut 1 1/4 in, Overall Length 1 1/2 in, Shank Dia. 1 in

Square End Mill, 1.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 1.50 mm, Overall Length 60.00 mm, Shank Dia. 6.00 mm

Square End Mill, 1.40 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 2.10 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm

Square End Mill, 1/2 in Milling Dia., ZrN, Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 5.00mm Milling dia.

Square End Mill,Unfinished,1.5"L,Carbide

Triangle Turning Insert, Chip-Breaker Code EMX, Inscribed Circle 1/2 in, Al203+TiCN

Triangle Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 3/8 in, TiAlN+AlCrN

Triangle Turning Insert, Inscribed Circle 3/4 in, Bright (Uncoated)

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0156 in, Carbide

Turning Insert, Inscribed Circle 1/2 in, TiCN