AttributeKey20: Cast Iron (K) Compatibility

Products with this attribute (77 total)

Ball End Mill, 3/16" Dia, Carbide

Ball End Mill, Carbide, 0.0270"Milling dia

Ball End Mill, Carbide, 0.0781"Milling dia

Ball End Mill, Carbide, 0.45mm Milling dia

Ball End Mill, Carbide, 4.00mm Milling dia

Carbide End Mill,5/16in dia,13/16in Cut

Corner Chamfer End Mill, 4.00 mm Milling Dia., Carbide, Straight, Metric, 90 Degrees , 0.10 mm, 11.00 mm

Corner Chamfer End Mill, 5/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0200 in, 3/4 in

Corner Chamfer End Mill, 5/8" Shank dia.

Corner Chamfer End Mill, 7.00 mm Milling Dia., Carbide, Weldon Flat, Metric, 0.40 mm, 16.00 mm

Corner Chamfer End Mill, K30F-DCF

Corner Chamfer End Mill,3/8" Shank dia.

Corner Chamfer End Mill,5/8" Shank dia.

Corner Radius End Mill, 0.187" Shank dia.

Corner Radius End Mill, 0.375" Shank dia.

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 1 1/4 in, 4 in

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 1 1/4 in, 3 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 4 in, 6 1/4 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 7/8 in, 2 1/2 in

Corner Radius End Mill, 5.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 0.25mm, 7.50 mm, 76.00 mm

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.09 in, 1 1/4 in, 3 1/2 in

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill, Carbide, 3.000" L

Corner Radius End Mill,0.500" Shank dia.

Corner Radius End Mill,0.625" Shank dia.

Corner Radius End Mill,nACo,1.500" L

Corner Radius End Mill,WS15PE Grade

Corner Radius End Mill,WS15PE Grade

Diamond Turning Insert, Diamond, 1/4 in, CCMT, 80 Degrees, 0.0079 in, Cermet

Diamond Turning Insert, Diamond, 1/4 in, CCMT, 80 Degrees, 1/64 in, Carbide

Diamond Turning Insert, Inscribed Circle 3/8 in, Bright (Uncoated), ANSI Code VNGA331T0820, Clearance Angle 0 Degrees

End Mill,0.1563 in. Milling Dia.,I2S

End Mill,0.5000 in. Milling Dia.,5AN2

End Mill,0.6250 in. Milling Dia.,5V0S

End Mill,0.7500 in. Milling Dia.,5AN3

End Mill,1.0000 in. Milling Dia.,4K02

End Mill,9.00mm Milling Dia.,D003/D013

Square End Mill, 0.0156" Milling dia.

Square End Mill, 0.0650" Milling dia.

Square End Mill, 0.0650" Milling dia.

Square End Mill, 0.0750" Milling dia.

Square End Mill, 0.1562" Milling dia.

Square End Mill, 0.2500" Milling dia.

Square End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 1/8 in, Overall Length 7 in, Shank Dia. 1 in

Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 1/2 in Milling Dia., Carbide, nACRo, Weldon Flat, Length of Cut 1 3/4 in, Overall Length 4 1/2 in, Shank Dia. 1/2 in

Square End Mill, 1/2 in Milling Dia., Carbide, nACRo, Weldon Flat, Length of Cut 1 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 100.00 mm, Shank Dia. 16.00 mm

Square End Mill, 3.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 4.50 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5/16 in Milling Dia., ZrN, Straight, Length of Cut 27/64 in, Overall Length 2 1/2 in, Shank Dia. 19/64 in

Square End Mill,Unfinished,1.5"L,Carbide

Square Turning Insert, Chip-Breaker Code EGU, Inscribed Circle 1/2 in, Al203+TiCN

Square Turning Insert, Square, 3/4 in, SNMG, 3/64 in, Carbide

Triangle Turning Insert, Chip-Breaker Code EGE, Inscribed Circle 3/8 in, Al203+TiCN

Triangle Turning Insert, Chip-Breaker Code ELU, Inscribed Circle 1/4 in, Al203+TiCN

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0312 in, Carbide

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0468 in, Carbide

Trigon Milling Insert, Inscribed Circle 0.5510 in, Rake -3 Degrees to -8 Degrees Radial;8 Degrees Axial

Turning Insert, CCGT, Carbide, 32.51 Size