AttributeKey21: Hardened (H) Compatibility

Products with this attribute (69 total)

Ball End Mill, 3/16 in Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 5/16 in Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, AlTiN, 0.187" Shank dia.

Ball End Mill, Carbide, 0.0250"Milling dia

Ball End Mill, Carbide, 0.0400"Milling dia

Ball End Mill, Carbide, 0.0781"Milling dia

Ball End Mill, Carbide, 0.0900"Milling dia

Ball End Mill,ZrN,0.500" Shank dia.

Carbide End Mill,1/8in dia,0.2250in Cut

Carbide End Mill,8.00mm dia,12.00mm Cut

Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Radius End Mill, 0.187" Shank dia.

Corner Radius End Mill, 0.312" Shank dia.

Corner Radius End Mill, 0.375" Shank dia.

Corner Radius End Mill, 0.500" Shank dia.

Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Altima, Straight, Metric, 0.50mm, 8.00 mm, 57.00 mm

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1 1/2 in, 4 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 7/8 in, 2 1/2 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 2 1/2 in, 4 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1 1/4 in, 4 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.09 in, 1 1/4 in, 3 1/2 in

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill, Carbide, 3.000" L

Corner Radius End Mill, Carbide, 50.00mm L

Corner Radius End Mill, nACo, 2.500" L

Corner Radius End Mill,0.500" Shank dia.

Diamond Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 1/4 in, Absotech, ANSI Code DCMT21.52ESU, Chip-Breaker Style Single, Clearance Angle 7 Degrees , Coating Process CVD

Diamond Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 1/4 in, Al203+TiCN, ANSI Code DCMT21.52ESU, Chip-Breaker Style Single, Clearance Angle 7 Degrees , Coating Process CVD

Diamond Turning Insert, Chip-Breaker Code ME, Inscribed Circle 1/4 in, Megacoat Nano, ANSI Code CCMW2151T00315MEKBN05M, Clearance Angle 7 Degrees

Diamond Turning Insert, Diamond, 1/4 in, CCMT, 80 Degrees, 1/64 in, Carbide

Diamond Turning Insert, Diamond, 3/8 in, CCMX, 80 Degrees, 0.0079 in, PCD

Diamond Turning Insert, Diamond, 5/16 in, CPMT, 80 Degrees, 1/64 in, Carbide

End Mill, 0.3750 in. Milling Dia., 6208

End Mill, TiCN, 1.0000 in Milling Dia, 6200

End Mill,0.5000 in. Milling Dia.,5AN2

End Mill,1/16 in.2 Flutes,TiCN

End Mill,3.00mm Milling Dia.,J111

End Mill,9/64 in.4 Flutes,TiCN

End Mill,AlTiN,0.1875 in Millng Dia,4V05

End Mill,nACRo,0.250" Shank dia.,Carbide

End Mill,nACRo,0.250" Shank dia.,Carbide

End Mill,Uncoated,0.125" Shank dia.

Parting and Grooving Insert, Inscribed Circle 5/8 in, ANSI Code CGAL1504200

Parting and Grooving Insert, Inscribed Circle 5/8 in, ANSI Code CGAL4062

Square End Mill, 0.0200" Milling dia.

Square End Mill, 0.0450" Milling dia.

Square End Mill, 0.0600" Milling dia.

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 89.00 mm, Shank Dia. 16.00 mm

Square Turning Insert, Chip-Breaker Code ENZ, Inscribed Circle 1/2 in, Al203+TiCN

Square Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 3/8 in

Square Turning Insert, Square, 1/4 in, SPG, 1/32 in, Carbide

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0156 in, Carbide

Turning Insert, Chip-Breaker Code ESEW, Inscribed Circle 3/8 in, Al203+TiCN

Turning Insert, CNMG, Carbide, 433 Size