AttributeKey21: Material Grade - Machining

Products with this attribute (51 total)

Ball End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through

Carbide End Mill,1/16In,2FL,Single,1-1/2

Carbide End Mill,4in,CEM12BXL2

Corner Radius End Mill, 1.00 mm Milling Dia., Carbide, Metric, 0.50mm, 1.00 mm, 60.00 mm

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.03 in, 1 in, 3 in

Corner Radius End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.01 in, 1/2 in, 1 1/2 in

Corner Radius End Mill, 10.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0800 in, 25/64 in, 2 27/32 in

Corner Radius End Mill, 12.00mm Milling Dia., Carbide, TiAlN, Metric, 0.1200 in, 31/64 in, 3 61/64 in

Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Metric, 0.50mm, 38.00mm, 104.00mm

Corner Radius End Mill, 20.00mm Milling Dia., Metric, 4.00mm, 38.00mm, 104.00mm

Corner Radius End Mill, 20.00mm Milling Dia., TAZ, Metric, 0.10mm, 32.00mm, 104.00mm

Corner Radius End Mill, 25.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.0800 in, 63/64 in, 110.00mm

Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Metric, 0.25mm, 3.00 mm, 57.00 mm

Corner Radius End Mill, 5/16 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.01 in, 13/16 in, 2 1/2 in

Corner Radius End Mill, 5/16 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.02 in, 1/2 in, 2 1/2 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.015 in, 15/16 in, 5 31/32 in

Corner Radius End Mill, 6.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0200 in, 15/64 in, 2 53/64 in

Diamond Turning Insert, Chip-Breaker Code UEU, Inscribed Circle 3/8 in, AlCrN, ANSI Code CCGT-32.51-UEU, Chip-Breaker Style On One Side, Clearance Angle 7 Degrees , Coating Process PVD

END MILL, MULTI-FLUTE, SINGLE-END, 4 1/2 X 1 1/4 IN

End Mill,3/64 in.2 Flutes,TiN

Micro Drill Bit, Uncoated, 0.0038"Bit Size

Micro Drill Bit, Uncoated, 5.65mm Bit Size

Monster Tool Co

Monster Tool Co

Square End Mill, 1/4 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 3/4 in, Overall Length 2 1/2 in, Shank Dia. 1/4 in

Square End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/2 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 4.500 mm

Square End Mill, 9/16 in Milling Dia., Carbide, AlTiN, Weldon Flat, Length of Cut 1 1/4 in, Overall Length 3 1/2 in, Shank Dia. 9/16 in

SQUARE END MILL, CENTRE CUTTING, 4 FLUTES, 3/16 IN MILLING DIAMETER,

Walter Prototyp

Walter Prototyp

Walter Prototyp