AttributeKey21: Super Alloy (S) Compatibility

Products with this attribute (70 total)

Ball End Mill, 1/32 in Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, Carbide, 0.0468"Milling dia

Ball End Mill, Carbide, 0.0781"Milling dia

Ball End Mill, Carbide, 4.00mm Milling dia

Carbide End Mill,5/16in dia,13/16in Cut

Cor. Rad. End Mill, 1/16" CR, Carbide

Corner Chamfer End Mill, 14.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 14.00 mm

Corner Chamfer End Mill, 4.50 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 14.00 mm

Corner Radius End Mill, 0.125" Shank dia.

Corner Radius End Mill, 0.750" Shank dia.

Corner Radius End Mill, 1 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.06 in, 2 in, 8 in

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.02 in, 5/8 in, 4 in

Corner Radius End Mill, 1/4 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 3/4 in, 2 1/2 in

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 2.000" L

Corner Radius End Mill, nACo, 4.000" L

Corner Radius End Mill,0.312" Shank dia.

Corner Radius End Mill,0.500" Shank dia.

Corner Radius End Mill,nACo,5.000" L

Corner Radius End Mill,Uncoated,2.5" L

Diamond Turning Insert, Chip-Breaker Code ELU, Inscribed Circle 3/8 in, Absotech Platinum, ANSI Code VNMG331ELU, Chip-Breaker Style Double, Clearance Angle 0 Degrees , Coating Process CVD

Diamond Turning Insert, Chip-Breaker Code EMX, Inscribed Circle 5/8 in, Absotech Platinum, ANSI Code CNMG543EMX, Chip-Breaker Style Double, Clearance Angle 0 Degrees , Coating Process CVD

Diamond Turning Insert, Chip-Breaker Code EUX, Inscribed Circle 1/2 in, Al203+TiCN, ANSI Code CNMG432EUX, Chip-Breaker Style Double, Clearance Angle 0 Degrees , Coating Process CVD

Diamond Turning Insert, Chip-Breaker Code MES, Inscribed Circle 3/8 in, Megacoat Nano, ANSI Code CCMW3252S00525MES, Clearance Angle 7 Degrees

Diamond Turning Insert, Diamond, 5/16 in, CPMT, 80 Degrees, 1/32 in, Carbide

End Mill, AlTiN, 0.375" Shank dia., Carbide

End Mill, AlTiN, 0.500" Shank dia., Carbide

End Mill,0.2500 in. Milling Dia.,4K03

End Mill,0.2500 in. Milling Dia.,4S

End Mill,0.3750 in. Milling Dia.,I2S

End Mill,0.5000 in. Milling Dia.,5AN2

End Mill,0.7500 in. Milling Dia.,I4B

End Mill,1 in.4 Flutes,TiN

End Mill,1.0000 in. Milling Dia.,4K02

End Mill,5/32 in.2 Flutes,TiCN

End Mill,6.00mm Milling Dia.,7585/7595

End Mill,nACRo,0.187" Shank dia.,Carbide

G.W. Schultz Tool

Square End Mill, 0.0330" Milling dia.

Square End Mill, 0.1875" Milling dia.

Square End Mill, 1/8 in Milling Dia., Carbide, TiAlN, Straight, Length of Cut 3/16 in, Overall Length 3 in, Shank Dia. 1/4 in, Neck Dia. 7/64 in

Square End Mill, 3.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 4.50 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm

Square End Mill, K30F-TICN Grade, Carbide

Square End Mill,2.500" L,0.375" dia.

Square Turning Insert, Chip-Breaker Code EMU, Inscribed Circle 5/8 in, Al203+TiCN

Square Turning Insert, Chip-Breaker Code EMU, Inscribed Circle 5/8 in, TiAlN+AlCrN

Square Turning Insert, Chip-Breaker Code EUX, Inscribed Circle 1/2 in, Al203+TiCN

Triangle Turning Insert, Chip-Breaker Code EGE, Inscribed Circle 3/8 in, Al203+TiCN

Triangle Turning Insert, Chip-Breaker Code LD, Inscribed Circle 1/4 in

Triangle Turning Insert, Triangle, 3/8 in, TNMA, 0.0468 in, Carbide

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0312 in, Carbide

Trigon Milling Insert, Inscribed Circle 0.5510 in, Rake -3 Degrees to -8 Degrees Radial;8 Degrees Axial

Turning Insert, Diamond, 0.375 in., VCGT, 0.0039 in, Carbide