AttributeKey22: Material - Machining

Products with this attribute (81 total)

Carbide End Mill,13/64In,4F,Single,2-1/2

Carbide End Mill,1In,4FL,Single,6In

Carbide End Mill,27/64In,2F,Single,2-3/4

Carbide End Mill,4.0mm,4FL,Single

Carbide End Mill,5/16In,4FL,Double

Carbide End Mill,5/32In,4FL,Double

Cor Rad End Mill, 1", Carb, 0.0300" rad

Cor Rad End Mill,10.00mm,Carb,2.00mm rad

Corner Radius End Mill, 1.00 mm Milling Dia., Carbide, Metric, 0.50mm, 1.00 mm, 60.00 mm

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.03 in, 1 in, 3 in

Corner Radius End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.01 in, 1/2 in, 1 1/2 in

Corner Radius End Mill, 25.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.0800 in, 63/64 in, 110.00mm

Corner Radius End Mill, 3.80mm Milling Dia., Carbide, TiAlN, Metric, 0.08mm, 4.00mm, 54.00mm

Corner Radius End Mill, 5.75mm Milling Dia., Carbide, TiAlN, Metric, 0.16mm, 6.00mm, 54.00mm

Diamond Turning Insert, Diamond, 1/4 in, CCMT, 80 Degrees, 1/32 in

Hand Reamer, Spiral, Straight, 5/8 in, High Speed Steel, Bright (Uncoated)

Jobber Drill Bit, Drill Bit Size 2.28 mm, Drill Bit Point Angle 130 Degrees , High Speed Steel, Decimal Equivalent 0.0898, Metric, Drill Bit Point Type S Thinning Point, Non-Coolant Through

Jobber Drill Bit,13.20mm,Carbide

Jobber Drill Bit,14.10mm,Carbide

Micro Twist Drill, Solid Carbide, TiN

Monster Tool Co

Monster Tool Co

Monster Tool Co

Monster Tool Co

Monster Tool Co

Round Hammer Drill, Hex, 1/8 in, Carbide Tipped, 3 in Overall Length, Maximum Drilling Depth 2 in, Shank Diameter 1/4 in, Bright (Uncoated), Package Quantity 25

Screw Machine Drill Bit, Drill Bit Size 1.77 mm, Drill Bit Point Angle 140 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.0697

Screw Machine Drill Bit, Drill Bit Size 12.20 mm, Drill Bit Point Angle 140 Degrees , Carbide, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.4803

Screw Machine Drill Bit, Drill Bit Size 2.42 mm, Drill Bit Point Angle 130 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.0953

Screw Machine Drill Bit, Drill Bit Size 2.55 mm, Drill Bit Point Angle 130 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1004

Screw Machine Drill Bit, Drill Bit Size 3.18 mm, Drill Bit Point Angle 130 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1252

Screw Machine Drill Bit, Drill Bit Size 3.47 mm, Drill Bit Point Angle 130 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1366

Screw Machine Drill Bit, Drill Bit Size 5.65 mm, Drill Bit Point Angle 120 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.2224

Sq. End Mill,Single End,Carb,14.00mm

Sq. End Mill,Single End,Carb,9.00mm

Square End Mill, 0.60 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1.80 mm, Overall Length 38.00 mm, Shank Dia. 3.00 mm

Square End Mill, 1/64 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/16 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/2 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/2 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 35.00 mm, Overall Length 92.00 mm, Shank Dia. 16.00 mm

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5/64 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 5/32 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 9/16 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1 1/4 in, Overall Length 3 1/2 in, Shank Dia. 9/16 in

Square End Mill, 9/16 in Milling Dia., Carbide, AlTiN, Weldon Flat, Length of Cut 1 1/4 in, Overall Length 3 1/2 in, Shank Dia. 9/16 in

Square End Mill, 9/32 in Milling Dia., Carbide, ZrN, Straight, Length of Cut 3/4 in, Overall Length 2 1/2 in, Shank Dia. 5/16 in

Taper L Drill Bit, 115.00mm L, 6.00mm dia.

Taper L Drill Bit, 160.00mm L, 10.00mm dia

Taper L Drill Bit, 75.00mm L, 30.00mm dia.

Taper L Drill Bit, 75.00mm L, 30.00mm dia.

WIDIA, 10 Insert Size, Nickel/Titanium, Parting and Grooving Insert - 274MP3|WG375I10U3PN - Grainger