AttributeKey22: Non Ferrous (N) Compatibility

Products with this attribute (64 total)

Ball End Mill, Carbide, 0.0900"Milling dia

Ball End Mill, nACo, 0.250" Shank dia.

Chamfer End Mill,3/8 in. Dia,Carbide,209

Corner Chamfer End Mill, 14.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Chamfer End Mill, 4.00 mm Milling Dia., Carbide, Straight, Metric, 90 Degrees , 0.10 mm, 11.00 mm

Corner Chamfer End Mill, 9.00 mm Milling Dia., Carbide, Straight, Metric, 0.20 mm, 16.00 mm

Corner Radius End Mill, 0.375" Shank dia.

Corner Radius End Mill, 1 1/2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 6 in, 8 1/2 in

Corner Radius End Mill, 1 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.06 in, 2 in, 8 in

Corner Radius End Mill, 1/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.015 in, 1/2 in, 4 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.19 in, 1 3/4 in, 4 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.06 in, 1 1/8 in, 2 1/2 in

Corner Radius End Mill, AlTiN, 2.000" L

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill, Carbide, 38.00mm L

Corner Radius End Mill, Carbide, 50.00mm L

Corner Radius End Mill,0.250" Shank dia.

Diamond Turning Insert, Chip-Breaker Code EUX, Inscribed Circle 1/2 in, Al203+TiCN, ANSI Code CNMG432EUX, Chip-Breaker Style Double, Clearance Angle 0 Degrees , Coating Process CVD

Diamond Turning Insert, Chip-Breaker Code WH, Inscribed Circle 1/2 in, TiCN, ANSI Code 4NC-CNGA431WH, Clearance Angle 0 Degrees

Diamond Turning Insert, Diamond, 1/4 in, CPMT, 80 Degrees, 1/64 in, Carbide

Diamond Turning Insert, Diamond, 3/8 in, CPMT, 80 Degrees, 1/32 in, Carbide

Diamond Turning Insert, Inscribed Circle 1/2 in, TiN, ANSI Code 2NC-CNGA433, Clearance Angle 0 Degrees

Diamond Turning Insert, Inscribed Circle 1/4 in, Bright (Uncoated), ANSI Code NU-CCGA21.51HS, Clearance Angle 7 Degrees

Diamond Turning Insert, Inscribed Circle 3/4 in, Al203+TiCN, ANSI Code CNMA643, Clearance Angle 0 Degrees , Coating Process CVD

End Mill, 7.00mm Milling Dia., 3605/3615

End Mill, AlTiN, 0.625" Shank dia., Carbide

End Mill, TiCN, 0.7500 in Milling Dia, 6205

End Mill, Uncoated, 0.312" Shank dia.

End Mill,0.7500 in. Milling Dia.,4K02

End Mill,1.0000 in. Milling Dia.,4K02

End Mill,3.00mm Dia,12.00mm Cut,Carbide

End Mill,5/32 in.2 Flutes,TiCN

End Mill,ZrN,0.500" Shank dia.,Carbide

Parting and Grooving Insert, Neutral, Max. Grooving Width 6.00mm, ANSI Code GX24-4E600N05-UA4 WKP13S, Chip-Breaker Code UA4, Clearance Angle 6 Degrees , Coating Process CVD

Square End Mill, 0.0100" Milling dia.

Square End Mill, 0.0200" Milling dia.

Square End Mill, 0.0650" Milling dia.

Square End Mill, 0.0937" Milling dia.

Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 6 in, Shank Dia. 1/2 in

Square End Mill, 1/8 in Milling Dia., Carbide, TiAlN, Straight, Length of Cut 3/16 in, Overall Length 3 in, Shank Dia. 1/4 in, Neck Dia. 7/64 in

Square Turning Insert, Chip-Breaker Code EGZ, Inscribed Circle 1/2 in

Square Turning Insert, Chip-Breaker Code EMU, Inscribed Circle 5/8 in, Al203+TiCN

Square Turning Insert, Chip-Breaker Code ENG, Inscribed Circle 1/2 in, Al203+TiCN

Square Turning Insert, Square, 1/2 in, SNMG, 3/64 in, Carbide

Triangle Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 1/4 in, Al203+TiCN

Triangle Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 3/8 in, TiAlN+AlCrN

Triangle Turning Insert, Inscribed Circle 1/4 in, Bright (Uncoated)

Turning Insert, CNMG, Carbide, 543 Size

Turning Insert, Inscribed Circle 0.9844 in, TiN

Turning Insert, VNMG, Carbide, 333 Size