AttributeKey23: Non Ferrous (N) Compatibility

Products with this attribute (62 total)

Ball End Mill, 10 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 4 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through

Ball End Mill, Carbide, 0.0312"Milling dia

Carbide End Mill,1/8in dia,0.2250in Cut

Carbide End Mill,9/16in dia,1-1/8in Cut

Cor. Rad. End Mill, 0.50mm CR, Carbide

Corner Chamfer End Mill, 4.00 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 11.00 mm

Corner Chamfer End Mill, 7/16 in Milling Dia., Cobalt, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0100 in, 1 1/4 in

Corner Radius End Mill, 0.187" Shank dia.

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 1 1/4 in, 4 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 1 1/2 in, 4 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 4 in, 6 1/4 in

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill,nACo,2.000" L

Diamond Turning Insert, Chip-Breaker Code KH, Inscribed Circle 1/2 in, TiCN+Al2O3+Ti, ANSI Code CNMG432KH, Chip-Breaker Style On Two Sides, Clearance Angle 0 Degrees

Diamond Turning Insert, Chip-Breaker Code LS, Inscribed Circle 3/8 in, Bright (Uncoated), ANSI Code 2NU-DCGA32.51LS, Clearance Angle 7 Degrees

Diamond Turning Insert, Chip-Breaker Code MESI, Inscribed Circle 3/8 in, TiAlN+AlCrN, ANSI Code VBGT330.5MESI, Chip-Breaker Style Single, Clearance Angle 5 Degrees , Coating Process PVD

Diamond Turning Insert, Inscribed Circle 1/4 in, Bright (Uncoated), ANSI Code 2NU-DCGA21.51, Clearance Angle 7 Degrees

Diamond Turning Insert, Inscribed Circle 3/8 in, Al203+TiCN, ANSI Code CCMA32.51, Chip-Breaker Style Single, Clearance Angle 7 Degrees , Coating Process CVD

Diamond Turning Insert, Inscribed Circle 3/8 in, Bright (Uncoated), ANSI Code VNGA331T0820, Clearance Angle 0 Degrees

End Mill, 14.00mm Milling Dia., 577C

End Mill,0.1563 in. Milling Dia.,I4C

End Mill,0.3750 in. Milling Dia.,I2S

End Mill,0.5000 in. Milling Dia.,5V0E

End Mill,0.5000 in. Milling Dia.,5V0S

End Mill,0.6250 in. Milling Dia.,5V0S

End Mill,1.50mm2 Flutes,TiN

End Mill,7/64 in.3 Flutes,TiCN

End Mill,Uncoated,0.500" Shank dia.

G.W. Schultz Tool

Parallelogram Milling Insert, Inscribed Circle 0.130 in, Positive, AXMT123532PEER-E-ACM300, E, Single Sided, 11 Degrees

Square End Mill, 0.0200" Milling dia.

Square End Mill, 0.0394" Milling dia.

Square End Mill, 0.1250" Milling dia.

Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 6 in, Overall Length 9 3/4 in, Shank Dia. 2 in

Square End Mill, 8.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 19.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm

Square End Mill, Unfinished, 1.5"L, Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,WS15PE Grade,Carbide

Square Turning Insert, Chip-Breaker Code EEM, Inscribed Circle 1/2 in, Absotech

Square Turning Insert, Chip-Breaker Code EMU, Inscribed Circle 5/8 in, TiAlN+AlCrN

Triangle Turning Insert, Chip-Breaker Code EGZ, Inscribed Circle 1/2 in

Triangle Turning Insert, Inscribed Circle 3/4 in, Bright (Uncoated)

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0312 in, Carbide

Turning Insert, Diamond, 0.375 in., VCGT, 0.0039 in, Carbide