AttributeKey23: Stainless (M) Compatibility

Products with this attribute (70 total)

Ball End Mill, 12 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, Carbide, 0.0270"Milling dia

Ball End Mill, Carbide, 0.0312"Milling dia

Ball End Mill, Carbide, 0.0312"Milling dia

Ball End Mill, Carbide, 0.0625"Milling dia

Ball End Mill, Carbide, 0.0937"Milling dia

Ball End Mill, Carbide, 0.1093"Milling dia

Ball End Mill, Carbide, 3.00mm Milling dia

Carbide End Mill,8.00mm dia,12.00mm Cut

Cor. Rad. End Mill, 1/16" CR, Carbide

Cor. Rad. End Mill, 1/64" CR, Carbide

Corner Chamfer End Mill, 20.00 mm Milling Dia., Carbide, Straight, Metric, 0.50 mm, 38.00 mm

Corner Chamfer End Mill,5/8" Shank dia.

Corner Radius End Mill, 0.312" Shank dia.

Corner Radius End Mill, 0.375" Shank dia.

Corner Radius End Mill, 0.375" Shank dia.

Corner Radius End Mill, 4.00 mm Milling Dia., Carbide, TiAlN, Straight, Metric, 0.20mm, 11.00 mm, 70.00 mm

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1 1/4 in, 4 in

Corner Radius End Mill, Carbide, 3.000" L

Corner Radius End Mill, Carbide, 6.000" L

Corner Radius End Mill, Carbide, 75.00mm L

Corner Radius End Mill,0.250" Shank dia.

Corner Radius End Mill,nACo,1.500" L

Diamond Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 1/4 in, Al203+TiCN, ANSI Code DCMT21.52ESU, Chip-Breaker Style Single, Clearance Angle 7 Degrees , Coating Process CVD

Diamond Turning Insert, Diamond, 5/16 in, CPMT, 80 Degrees, 1/64 in, Carbide

Diamond Turning Insert, Inscribed Circle 3/8 in, Al203+TiCN, ANSI Code CCMA32.52, Chip-Breaker Style Single, Clearance Angle 7 Degrees , Coating Process CVD

End Mill, AlTiN, 0.250" Shank dia., Carbide

End Mill, TiCN, 0.6250 in Milling Dia, 6205

End Mill, Uncoated, 0.750" Shank dia.

End Mill,0.1250 in. Milling Dia.,I4S

End Mill,5/32 in.2 Flutes,TiCN

End Mill,8.00mm Milling Dia.,4777

End Mill,AlTiN,0.1875 in Millng Dia,4V05

End Mill,nACRo,0.125" Shank dia.,Carbide

End Mill,TiAlN,0.1880 in. Milling Dia.

End Mill,TiCN,0.5000 in Milling Dia,6208

Milling Insert, Toroidal

Parting and Grooving Insert, Inscribed Circle 5/8 in, ANSI Code CGAR1504300

Square End Mill, 0.0156" Milling dia.

Square End Mill, 0.0650" Milling dia.

Square End Mill, 0.0800" Milling dia.

Square End Mill, 0.0937" Milling dia.

Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 6 in, Shank Dia. 1/2 in

Square End Mill, 1/2 in Milling Dia., Carbide, nACRo, Weldon Flat, Length of Cut 1 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 5/16 in Milling Dia., ZrN, Straight, Length of Cut 27/64 in, Overall Length 2 1/2 in, Shank Dia. 19/64 in

Triangle Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 3/8 in

Triangle Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 3/8 in, Al203+TiCN

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0468 in, Carbide