Brand: ['Adder']

Products with this attribute (16 total)

<b>Two input, four output, video splitter and extender</b><br />The ADDERLink <strong>DV104T</strong> is a intelligent non blocking cross point switch and high performance digital video extender and 1x4 splitter. Configurations can be selected dynamically via the web interface or controlled by a 3rd party control system. The ALDV104T-US is the Transmitter Unit ONLY and requires 1 to 4 ALDV100R HDMI and/or ALDV120R DVI-D receiver units to operate (sold separately).</p><p><b>Proof of Display via IP network</b><br />The unit determines if the entire system is operating correctly and video is visible on the monitors. It can detect if video is present from the player and whether the cables to the monitors are attached and the monitor is turned on. This information is available by an IP socket thus allowing remote diagnostics and integration into content management systems.</p><p><b>Security</b><br />Security on the web interface is by HTTP digest authentication (RFC 2617) with username and password as requested information.</p><p><b>Perfect HD Digital Video</b><br />The ALDV104 uses an uncompressed video system where every frame is sent without loss with resolutions up to 1920 x 1200@60Hz (WUXGA) including 1080p, 720p and 480p resolutions.</p><p><b>50 meters/164 Feet over a single CATx cable</b><br />Video, audio and power all pass along a single CATx cable, providing up to 50m of extension. Distance can be dependent upon CATx cable types and the number of connection breaks for patch panels and wall plates.</p><p><b>Please Note:</b> Recommended cables are CAT7 shielded with foiled twisted pairs.</p>
ADDER CATx DisplayPort USB & Audio CAM are highly compact devices & allows you to extend your DisplayPort equipped computer over CATX cable up to 300 m.
ADDER View RDX 1000IP Rack Tray with 19" Samsung screen including integrated AVX1016IP KVM switch. The ADDER View RDX 1000IP is the complete server room solution with local and remote management.</p><p>The 1U keyboard tray is available in most keyboard language layouts and features either a 17 inch or 19 inch premium quality Samsung SXGA 1280 x1024 TFT LCD panel with touchpad control and advanced OSD for device selection. Control 16 computers directly from the tray or remotely via a secure IP connection. Expand to support up to 256 computers using CATx 1000 switches.</p><p>Using ADDER's CAM modules,(One required per connected computer), you can connect the switch via CATx cable to any type of server including PC, Mac and Sun. Country code reporting, DDC and continuous keyboard and mouse emulation further ensure faultless operation across your unique installation.</p>
AdderALAV100P-US Price: $0.00 Adder AV 100 series extender pair, point to point, No DeSkew, outputs to 2 displays
AdderALAV100T-US Price: $0.00 AdderLink AV VGA Digital Signage Transmitter Unit
AdderLink Infinity Dual Extender Trasmitter Part Number ALIF2002T-US
AdderLink X Series X200/R - KVM extender
AdderView Pro 4-Port Quad VGA KVM Switch Part Number AV4PRO-VGA-QUAD-US
Buy Adder CATX-USB-DA, CATx USB Dual Computer Access Module - Prime Buy
Part of the ADDERView&reg; DDX&reg; range, the <strong>DDX CAM-DP</strong> is a Zero U DisplayPort CAM or Computer Access Module (CAM) which attaches a source computer and acts as a transmitter to either the DDX10 or DDX30 switch or directly to the DDX USR user station as a point to point extender (all sold separately). When combined with the DDX10 or DDX30, it forms an integral part of a KVM Matrix. </p><p>Available in DisplayPort, VGA and DVI variants, the DDX CAM supports all common single link digital video resolutions. HDMI is also possible via a passive converter.</p><p>Because the DDX CAM is powered by USB, you do not need an external power supply, thus simplifying cable clutter significantly. The same USB power connector also delivers USB data functionality and acts as a USB audio device.</p>
The ADDER <strong>SFP-MM-LC</strong> is a Multimode Fiber SFP Transceiver with LC Connector for use with the ADDERLink INFINITY series.</p><p>ADDERLink Infinity ALIF 1002 and all ALIF Dual variants (all sold separately) provide a choice of link connections. Each supports Copper-Based Gigabit Ethernet (1000Base-T) as well as Fiber Channel over Ethernet (FCoE). ALIF (1002) and ALIF Dual units provide a single system port (CATx) as standard on the right side of the front panel.</p><p>An additional SFP cage port, located just to the left, allows simple plug-in transceivers suitable for your application. Optional Fiber SFP Modules provide a 4.25Gbps rate selectable with LC type connectors suitable for up to 1640 feet/500 Meters (Multi-Mode) or 6.21 miles/10KM (Single-Mode), while the Gigabyte Ethernet CATx SFP Module extends up to, but is not limited to, a 328 feet/100 Meter cable length.</p>
The ADDER CATx <strong>CATX-USBA-DA</strong> is a Dual Computer Access Module or CAM with Audio Support, a highly compact device that allow you to share a single computer between two sets of peripheral devices. In simple terms the CAM can be viewed as a combined video splitter and peripheral hub. This is useful for mixing local and remote stations or mixing KVM with extension or signage systems.</p><p>The module connects to the video, USB and RS232 ports of your computer and then connects via CAT 5, 5e or 6 cabling to the ADDER View CATx KVM switches and/or ADDER extender receivers like the ADDERLink X100 or X200 (sold separately), each of which can be located up to 984 feet/300 meters from the module. Your video display, keyboard and mice are linked to the remote devices.</p>
The ADDERLink <strong>IPEPS-PLUS-US</strong> is a powerful and flexible KVM over IP product contained within a compact unit, the ADDERLink&trade; ipeps+ enables computer access from anywhere in the world, securely and remotely via the Internet or a corporate network. </p><p>The ADDERLink&trade; ipeps+ uses RealVNC&trade; client software that is specifically designed for secure, high performance KVM over IP applications. </p><p><i>Access Multi-Screen computers</i><br /><i>High performance video streaming up to 1920x1200 resolution</i><br /><i>Non-blocking access for up to 8 remote and one local users</i><br /><i>Compact metal case</i></p>
The ADDERLink <strong>X100A/R-US</strong> is a short haul, fully featured, keyboard, video, mouse and optional audio extender for PS/2 and USB computers. ADDERLink X100s have been designed for use in applications where keyboard, mouse, high quality video and audio needs to be extended no more than 100m (330ft) over category 5 or higher UTP cable.</p><p>The ADDERLink X100s provide industry-leading video clarity, audio quality and compatibility.</p><p>ADDER CATx KVM Switches and Extender products like the X100AR-US or X200AR-US are used in conjunction with ADDER CAMs or Computer Access Modules (sold separately) to connect to a range of machine types.</p>
The AdderLink&trade; <b>AL-IPEPS</b> enables you to remotely access and control your critical computing hardware using your standard IP network. KVM connections are VGA and PS/2. Using RealVNC client software, computers outside the network can be remotely and securely accessed.</p><p><b>RealVNC server with RFB 3.3 support:</b> up to four users can remotely and securely access computers outside your network, with the possibility of creating sixteen user profiles with defined access rights</p><p><b>High performance video over VNC:</b> RealVNC enables video resolutions of up to 1600x1200, as it is free of the limitations of HTTPS</p><p><b>USB and Virtual media support:</b> engineered to act as a conduit through which data can be passed so that files can be transferred via IP onto the ipeps and onto the target computer by means of a USB virtual media port</p><p><b>Choice of power source:</b> can be powered from two USB cables or independently from an external 5V power source</p><p><b>Independent operation:</b> maintain full control even during boot up, BIOS level or computer crash states, it will even work even if the controlled devices are not operational</p><p><b>ADDER.NET Enterprise Management Software:</b> provides a centralised, secure and intuitive user access management interface, where up to sixteen user profiles with defined access rights can be created</p>
The ADDERView <strong>AVX1016-US</strong> is a CATx 1000 KVM Switch for 1 local user to 16 computers. The CATx 1000 series are high density, small form factor KVM switches that provide local and remote access for a user that wishes to control up to 16 multi-platform servers using neat and convenient CATx cables.The CATx 1000 combines USB console support with a full KVM feature set to create a truly modern KVM switching solution that provides high quality video and CD quality audio. Highly flexible connectivity options make the ADDERView CATx 1000 the ideal solution for a wide range of server room, desktop and other demanding applications.</p><p>The ADDERView CATx 1000 can be controlled by a user from up to 984 feet/300m away over CATx cable using the ADDERLink X200 or X100 receiver and the integrated CATx extender. Flash upgradeable CAMs (Computer Access Modules) available for PS/2, USB and Sun keyboard and mouse support with optional audio (all sold separately).</p>