Brand: ['JW Winco']

Products with this attribute (1192 total)

927.7-63-10X32-A

927.7-63-M5-35-B

927.7-63-M5-50-A

927.7-63-M6-30-A

927.7-82-M6-35-A

927.7-82-M8-60-B

Aluminum "U" Handle, 11.81" | 426-AL-20-300-SW

Aluminum "U" Handle, 13.78" | 426-AL-20-350-SW

Aluminum "U" Handle, 3.46" | 425-AL-10-88-SW

Aluminum "U" Handle, 3.94" | 425-AL-8-100-SR

Aluminum "U" Handle, 4.41" | 26W112B79K

Aluminum "U" Handle, 4.41" | 565.2-20-112-A-BL

Aluminum "U" Handle, 4.72" | 12W120D35Q

Aluminum "U" Handle, 4.72" | 12W120D35V

Aluminum "U" Handle, 4.72" | 425-AL-10-120-SR

Aluminum "U" Handle, 4.72" | 425-AL-8-120-EL

Aluminum "U" Handle, 5.04" | 26W128B79K

Aluminum "U" Handle, 7.09" | 425-AL-10-180-SR

Aluminum "U" Handle, 7.87" | 425-AL-10-200-SW

Aluminum "U" Handle, 9.25" | 12W235D35Q

Aluminum "U" Handle, 9.25" | 425-AL-10-235-SR

Aluminum Arched "U" Handle, 15.75" | 30W400X23AK

Aluminum Arched "U" Handle, 23.62" | 30W600X23A/EL

Aluminum Arched "U" Handle, 6.3" | 20W160D18K

Aluminum Arched "U" Handle, 7.56" | 20W192D18K

Aluminum Fluid Level Sight Glass w/ Prismatic Reflector - M20 x 1.5 Thread - J.W. Winco R50

Aluminum Fluid Level Sight Glass w/ Reflector - M20 x 1.5 Thread - J.W. Winco O82/A

Aluminum Fluid Level Sight Glass w/o Reflector - M33 x 1.5 Thread - J.W. Winco O84/B

Aluminum Ledge "U" Handle, 15.75" | 430-400-EL

Aluminum Ledge "U" Handle, 4.33" | 430-110-EL

Aluminum Ledge "U" Handle, 5.12" | 430-130-SW

Aluminum Ledge "U" Handle, 5.91" | 430-150-SW

Aluminum Tubular "U" Handle, 11.81" | 30W300X10/EL

Aluminum Tubular "U" Handle, 11.81" | 30W300X10/SW

Aluminum Tubular "U" Handle, 15.75" | 28W400AT0Q/A

Aluminum Tubular "U" Handle, 23.62" | 667-30-600-EL

Aluminum Tubular "U" Handle, 27.56" | 667-30-700-SW

Aluminum Tubular "U" Handle, 7.87" | 28W200AT0K/B

Aluminum Tubular "U" Handle, 9.84" | 28W250AT0Q/A

Ball Chain w/ Two Key Rings, 14W200JC0, .55" Ring Diameter, 7.87" Chain Length

BALL KNOB, REVOLVING, BLACK, 1/2'' TO 13, STAINLESS STEEL

BALL KNOB, REVOLVING, BLACK, 1/4'' TO 20, STAINLESS STEEL

BALL KNOB, REVOLVING, BLACK, 3/8'' TO 16, STAINLESS STEEL

Brass Breather Filter with M22 x 1.5 Thread - J.W. Winco 882-M22X1.5-MS-M

Brass Breather Valve with G 1/2" Pipe Thread - J.W. Winco 881-G1/2-200-MS-M

Brass Breather Valve with M18 x 1.5 Thread - J.W. Winco 881-M18X1.5-200-MS-M

Brass Breather Valve with Plastic Cap - M14 x 1.5 Thread - J.W. Winco 883-M14X1.5-160-B-MS

Brass Fluid Level Sight Glass w/ Reflector - G 3/4" Pipe Thread - J.W. Winco 75GOD4/A

Buy Gear Levers | WGL-210 | Reid Supply

CKS-1.00-1/4X20-E | Hand Knobs - Aluminum, With tapped or Plain Bore, CKS Series, | JW WINCO | MISUMI

CKS-1.50-BLANK-A

Din 6319 spherical washers are used for clamping on non-parallel surfaces. these are sold individually not as sets. Refer to spec sheet for corresponding spherical washer selection.

DIN 6335 aluminum hand knobs are perfect for medium to heavy duty clamping applications. Highly resistant to weathering and, also have good corrosion resistance properties.

DIN 6335 phenolic plastic hand knobs feature a tapped brass insert.

DIN6335-KU-25-M5-K-MS Star Knob

FLUID LEVEL SIGHT GLASS

FLUID LEVEL SIGHT GLASS

FLUID LEVEL SIGHT GLASS

FLUID LEVEL SIGHT GLASS

FLUID LEVEL SIGHT GLASS

FLUID LEVEL SIGHT GLASS

FLUID LEVEL SIGHT GLASS

FLUID LEVEL SIGHT GLASS

GlobalIndustrial.com - Material Handling Equipment|Workbenches|Furniture|Tools|Motors|HVAC

GlobalIndustrial.com - Material Handling Equipment|Workbenches|Furniture|Tools|Motors|HVAC

GlobalIndustrial.com - Material Handling Equipment|Workbenches|Furniture|Tools|Motors|HVAC

GN 440 leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.

GN 440 leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.

GN 440 leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.

GN 440 leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.

GN 440.5 leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2).The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. To insure proper leveling mount size, divide the machine weight by the number of feet required. This will equal the pounds or load per leveling foot.

GN 5336 star knobs are forged; therefore, a close grain structure is maintained providing a high tensile strength and a smooth surface.

GN 5336 star knobs are forged; therefore, a close grain structure is maintained providing a high tensile strength and a smooth surface.

GN 5336 star knobs are forged; therefore, a close grain structure is maintained providing a high tensile strength and a smooth surface.

GN 5336 star knobs are forged; therefore, a close grain structure is maintained providing a high tensile strength and a smooth surface.

GN 5337.3 safety five-lobed knobs are best suited for applications where any unintended loosening of the knob may lead to accidents. The five lobe design is visually appealing and also gives the operator the means to achieve higher torque. Resistant to solvents, oils, grease and other chemical agents.

GN 612.8 Zinc Die-Cast Cam Action Indexing Plunger, without Lock Nut, M20 x 1.5mm Thread Size, 10mm Item Diameter. Zi...

GN 617-NI Series Stainless Steel Non Lock-Out Type Inch Size Indexing Plunger with Plastic Pull Knob, with Lock Nut, ...

GN 617-NI Series Stainless Steel Non Lock-Out Type Metric Size Indexing Plunger with Stainless Steel Pull Knob, with ...

GN 617-NI Series Stainless Steel Non Lock-Out Type Metric Size Indexing Plunger with Stainless Steel Pull Knob, witho...

GN 6335.5 technopolymer plastic hand knob features a stainless steel threaded stud for a use in a range of clamping applications.

GN 6335.5 technopolymer plastic hand knob features a stainless steel threaded stud for a use in a range of clamping applications.

GN 6335.5 technopolymer plastic hand knob features a stainless steel threaded stud for a use in a range of clamping applications.

GN 6335.5 technopolymer plastic hand knob features a stainless steel threaded stud for a use in a range of clamping applications.

GN 6336.5 technopolymer knobs with stainless steel threaded stud extend the range of clamping applications.

GN 6336.5 technopolymer knobs with stainless steel threaded stud extend the range of clamping applications.

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

GN 717 Series Steel Metric Size Indexing Plunger with Pull Ring, with Lock Nut, M12 x 1.75mm Thread Size, 24mm Thread...

GN 816 Series Steel Type A/AK Metric Size Locking Plunger with Knob, Normal Position Protruded, without Lock Nut, M16...

GN 816 Series Steel Type B/BK Metric Size Locking Plunger with Mechanism to Accept Key, Normal Position Protruded, wi...

GN 816.1 Series Steel Type A/AK Metric Size Normal Position Retracted Locking Plunger with Knob, with Lock Nut, M12 x...

GN 816.1 Series Steel Type A/AK Metric Size Normal Position Retracted Locking Plunger with Knob, with Lock Nut, M16 x...

GN 817.1-NI Series Stainless Steel Lock-out Type Indexing Plunger with Multiple Pin Lengths, Threaded Body, without L...