brandMinimum: 50.00

Products with this attribute (16317 total)

8mm 2 Flute Square End Single End Carbide End Mill, Bright Finish, Regular Length, 20mmFlute, 63MM OAL 20MM LOC,8MM SHANK,63MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001381

8mm 2FL Torus Grind HSC Profile Cutter, Carbide, Plain Cylindrical Shank, nano-Si Coated, 25mm Reach, 2mm Radius 7MM LOC,8MM SHANK,63MM OAL GF 500 T HSC (High Speed Cutting) trace milling 2 Flute standard length profile cutters with Torus form, Plain Cylindrical Shank, RH 30? Helix, RH Cut Center Cutting Carbide, nano-Si Coated. For precision contouring and die & mold work. Performs roughing, finishing, ramping, helical interpolation and copy milling in alloyed steels, free cutting steels, tool steels, stainless steels, titanium and Ti-alloys, cast iron, brass, bronze, hardened steels 40 - 54 HRc and special alloys. 2.00mm Radius Series 3856 Guhring Part #9038560080000

8mm 3 Flute 8xrl Ball Nose G-Mill Am Diamond KEO Part #62012

8mm 4 Flute Square End Single End Carbide End Mill, AlTiN Coated, Regular Length, 20mm Flute Length, 63mm OAL 20MM LOC,8MM SHANK,63MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001380B

8mm 4 Flute w/0.5mm Radius High Hardness Carbide End Mill, 28mm LOC, 8mm Shank, 63mm OAL, D2 - CVD Diamond Coated 28mm LOC,8mm Shank,63mm OAL GR Series: D2 CVD Diamond coated high strength, high hardness solid carbide end mills for graphite & abrasive materials featuring proprietary CVD diamond coating for long-run setups. Designed for graphite and abrasive non-metals. Proprietary cemented carbide grade, application specific geometry and D2 CVD diamond coating. Our hardest, thickest, longest lasting diamond coating. Maximum tool life and wear resistance for long production runs. Tight diameter tolerances for CVD diamond. Round Tool Laboratories USA Part #00204

8mm 4 Flute w/1.5mm Radius High Hardness Carbide End Mill, 28mm LOC, 8mm Shank, 63mm OAL, D2 - CVD Diamond Coated 28mm LOC,8mm Shank,63mm OAL GR Series: D2 CVD Diamond coated high strength, high hardness solid carbide end mills for graphite & abrasive materials featuring proprietary CVD diamond coating for long-run setups. Designed for graphite and abrasive non-metals. Proprietary cemented carbide grade, application specific geometry and D2 CVD diamond coating. Our hardest, thickest, longest lasting diamond coating. Maximum tool life and wear resistance for long production runs. Tight diameter tolerances for CVD diamond. Round Tool Laboratories USA Part #00206

8mm 4FL Rough-Tech 48 Necked Fine Carbide Coolant-Fed Rougher, Weldon Flat, Firex Coated, 19mm LOC, 27mm Reach 19MM LOC,8MM SHANK,63MM OAL ROUGH-TECH 48 / GS 100 U Right Hand 30? Helix, Right Hand Cut, Coolant-Through 4 Flute Standard Length Center Cutting High Performance Fine Tooth Carbide Rougher, Weldon Flat Shank, .30mm x 45? Corner Chamfer, Firex Coated for Ramping and Helical Interpolation Roughing All General Steels to 48 HRc, High-Alloyed Steels, Titanium & Nickel Alloys. Series 3365 Guhring Part #9033650080000

8mm 60? Spyrotec

8mm 90? Chamfer Mil Nano-Si Series No. 6785 , Order Code 8.000, Guhring Part #9067850080000

8mm Aero-Tech 3 Flute 45? Helix Carbide Plain Shank End Mill Firex Coated, 9mm LOC, 22mm Reach 9MM LOC,8MM SHANK,58MM OAL AERO-TECH / GH 100 U 3 Flute Stub Length, Right Hand 45? Helix, Right Hand Cut, Weldon Flat Shank, Center Cutting Carbide End Mill, .10mm x 45? Corner Chamfer, Firex Coated. Optimized flute geometry for ultimate efficiency in slot milling and roughing operations in aluminum, alloyed steels, free cutting steels, tool steels, stainless steels, cast iron, brass, bronze, plastics, special alloys & hardened steels to 54 HRc Series 3729 Guhring Part #9037290080000

8mm BAHCO? HSS Rotary Burr Spherical Ball Shape, 8mm Head Diameter, 6mm Head Length, 6mm Shank, Medium Toothing. Williams? # BAHHSGD0807M

8mm Carbide 140? Point RT100HF 5xD nano-Si? Coated Coolant Fed Drill, Reinforced Straight Shank, 53mm LOC 53mm LOC,91mm OAL,8mm Shank Series No. 8521, Order Code 08.000, Guhring Part #9085210080000

8mm Carbide 140? Point RT100VA 3xD nano-A? Coated Coolant Fed Drill, Reinforced Straight Shank, 41mm LOC 41mm LOC,79mm OAL,8mm Shank Series No. 8510, Order Code 08.000, Guhring Part #9085100080000

8mm Carbide Fiberglass Router Without End Cut, 25mm LOC, 8mm Shank, 63mm OAL, D1 - PVD Diamond Coated 25mm LOC,8mm Shank,63mm OAL FR Series: Fiberglass Routers with various end styles for a wide material range. Plain, Burr, End Mill, Drill point, and Fish Tail end features. Proprietary cemented carbide grade with 3 different SmoothCoat coatings. Use UnCoated for general purpose routing. Use A1 (TiB2) coated for titanium, aluminum & other non-ferrous. Use Hard thick D2 CVD diamond coating for long-run jobs or thin smooth D1 PVD diamond coating in plastics, woods, composites, CFRP?s, honeycombs & other abrasive materials. Round Tool Laboratories USA Part #32010D1

8mm Carbide Radius Point RT100R 5xD Firex? Coated Coolant Fed Drill, Reinforced Straight Shank, 53mm LOC 53mm LOC,91mm OAL,8mm Shank Series No. 6501, Order Code 08.000, Guhring Part #9065010080000

8mm Diameter 120? Point Cobalt NC Spot Drill, Bright Finish, 21mm LOC, 79mm OAL 21mm LOC,79mm OAL,8mm Shank Series No. 1134, Order Code 08.000, Guhring Part #9011340080000

8mm Diameter 4 Flute 90? Included Angle Solid Carbide Chamfer Mill TiALN Coated 4MM LOC,8MM SHANK,63MM OAL 90? Chamfer Mill, Plain Cylindrical Shank, Non-Helical Flutes, TiAlN Coated Series No. 6713, Order Code 008.0000, Guhring Part # 9067130080000

8mm Diameter Carbide End Mill - 4 Flute Stub Variable Helix Cr Micro-100 Part # VHSM-080-4

8mm Diameter Cobalt General Purpose Left Hand Cut 118? Point Jobber Length Drill, Steam Oxide Finish, 75mm LOC 75mm LOC,117mm OAL,8mm Shank Series No. 308, Order Code 08.000, Guhring Part #9003080080000

8mm Diameter Cobalt Type Ti 130? Split Point Jobber Length Drill, Bright Finish, 75mm LOC, 117mm OAL 75mm LOC,117mm OAL,8mm Shank Series No. 605, Order Code 08.000, Guhring Part #9006050080000

8mm Diameter Type Ti Cobalt 130? Split Point Taper Length Drill, Bright Finish, 109mm LOC, 165mm OAL 109mm LOC,165mm OAL,8mm Shank Series No. 617, Order Code 08.000, Guhring Part #9006170080000

8mm Diameter x 76mm Long Centerless Ground Carbide Rod/Blank C2 carbide offers far greater transverse rupture strength when compared to HSS. Phenomenal shock and heat resistance. Made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content for unparalleled versatility and wear resistance. Diameter Tolerance +0.0000/-0.0005\

8mm Diamond Coated, Drill Point Carbide Aerospace Router, 24mm LOC, 39mm Reach 24MM LOC,8MM SHANK,75MM OAL CR 100 Diamond Coated Right Hand Cutting Carbide Aerospace Router, Plain Cylindrical Shank, Non-Helical Flutes, Drill Point for CFC's (Carbon Fiber Composites), Graphite, Kevlar and Other Fiber Composite Aerospace Materials Series 6720 Guhring Part #9067200080000

8mm Diamond Coated, End-Cut Carbide Aerospace Router, 20mm LOC, 39mm Reach 20MM LOC,8MM SHANK,75MM OAL CR 100 Diamond Coated Right Hand Cutting Carbide Aerospace Router, Plain Cylindrical Shank, Non-Helical Flutes, End-Cutting, .15mm x 45? Corner Chamfer for CFC's (Carbon Fiber Composites), Graphite, Kevlar and Other Fiber Composite Aerospace Materials Series 6719 Guhring Part #9067190080000

8mm Diver 3FL Variable Helix Necked Carbide End Mill, Plain Cylindrical Shank, Nano-Si Coated, 19mm LOC, 26mm Reach 19MM LOC,8MM SHANK,63MM OAL RF 100 Diver 3 Flute, Right Hand 41?/43?/45? Variable Helix, Right Hand Cut, Plain Cylindrical Shank, Extended Neck Relief Center Cutting Carbide End Mill with .12mm x 45? Corner Chamfer for High Performance Ramping, Slotting, Plunging, Helical Interpolation Roughing & Finishing Steel, Stainless Steel, Cast Iron, Nickel/Titanium Alloys & Aluminum Series 6797 Guhring Part #9067970080000

8mm Finish-Tech 50 Necked Carbide 6FL 45? Helix End Mill, Plain Shank, Bright Uncoated, 1.50mm Radius, 26mm Reach 19MM LOC,8MM SHANK,63MM OAL FINISH-TECH 50 / GH 100 U Right Hand 45? Helix, Right Hand Cut, Plain Cylindrical Shank, Standard Length General Purpose Finishing up to 50 HRc Multi Flute Center Cutting Carbide End Mill with 1.50mm Radius, Bright Uncoated Series 3112 Guhring Part #9031120080150

8mm Finish-Tech 50 Necked Carbide 6FL 45? Helix End Mill, Weldon Flat Shank, Bright Uncoated, 40mm LOC, 64mm Reach 40MM LOC,8MM SHANK,100MM OAL FINISH-TECH 50 / GH 100 U Right Hand 45? Helix, Right Hand Cut, Weldon Flat Shank, Extra Long Length General Purpose Finishing up to 50 HRc Multi Flute Center Cutting Carbide End Mill with .10mm x 45? Corner Chamfer, Bright Uncoated Series 3313 Guhring Part #9033130080000

8mm Finish-Tech 50 Necked Carbide 6FL 45? Helix End Mill, Weldon Flat Shank, Firex Coated, 40mm LOC, 64mm Reach 40MM LOC,8MM SHANK,100MM OAL FINISH-TECH 50 / GH 100 U Right Hand 45? Helix, Right Hand Cut, Weldon Flat Shank, Extra Long Length General Purpose Finishing up to 50 HRc Multi Flute Center Cutting Carbide End Mill with .10mm x 45? Corner Chamfer, Firex Coated Series 3693 Guhring Part #9036930080000

8mm High Performance PCD 2FL Coolant Fed Slot Drill For Aluminum & Composites, 8mm LOC, 27mm Reach, 100mm OAL 8MM LOC,8MM SHANK,100MM OAL DL 100 X2 PCD (Polycrystalline Diamond) Coated, Right Hand Cutting, Non-Helical Flutes, Center Cutting Carbide Coolant Fed 2 Flute End Mill or Slot Drill with .10mm Corner Radius, Extended Neck Relief & Plain Cylindrical Shank for High Performance High Speed Slotting, Roughing, Ramping, Plunging, Helical Interpolation, Copy Milling and Finishing Aluminum, Graphite and Composite Materials Series 5493 Guhring Part #9054930080000

8mm HSS 130? Point GT100 Parabolic Flute Extra Length Series #1 Drill, TiN Coated, 165mm LOC, 240mm OAL 165mm LOC,240mm OAL,8mm Shank Series No. 670, Order Code 08.000, Guhring Part #9006700080000

8mm I.D. HSK-100A GUHRING Hydraulic Chuck w/Coolant & Increased Clamping Force, 160mm Gage Length HSK-A to ISO 12164-1 / DIN 69893-1 | balanced to G2.5 / 25,000 RPM | tremendous clamping force | maximum concentricity deviation 3 um | extra long gage lengths 150mm & 160mm maximum concentricity deviation 5 ?m and 200mm gage length maximum concentricity deviation 7 ?m | axial length adjustment | for tool shank tolerance h6 | includes adjustment screw, Series no. 4900 | includes hexagon chuck key, Series no. 4912 | order coolant supply set, Series No. 4949 separately. The use of reduction sleeves greatly improves the usefulness of a hydraulic chuck. Clamp directly on the cutting tool shank or use a reduction sleeve to hold a different diameter tool shank and increase transferable torque by approximately 25%. The reduction sleeve outside diameter must match your hydraulic chuck's nominal inside diameter. Reduction sleeves are available in 6 different O.D.s; 1/2\

8mm I.D. HSK-100A GUHRING Shrink Fit Holder With Conventional or MQL Coolant, 85mm Gage Length HSK-A to ISO12164-1 / DIN 69893-1 | Balanced to G2.5 / 25,000 RPM | Includes 4 or 6 M6 Balancing Screws | For Tool Shank Tolerance h6 | to DIN 69882-8 | Includes Setting Screw, Series No. 4977 or 4904 | For Conventional Cooling Order Coolant Supply Set, Series 4949 Separately | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4736, Order Code 008.1000. Made in Germany, Guhring Part #9047360081000

8mm I.D. HSK-100A GuhrOJet Peripheral Coolant-Fed Weldon Side Lock End Mill Holder, 80mm Gage Length HSK-A to ISO 12164-1 / DIN 69893-1 | Balanced to G6.3 / 15,000 RPM | For Tool Shank Tolerance h6 | Bore to DIN 1835-2 Form \

8mm I.D. HSK-50A GUHRING Weldon Side Lock Holder, Coolant Through, 65mm Gage Length HSK-A to ISO 12164-1 / DIN 69893-1 | Balanced to G6.3 / 15,000 RPM | Dimensions to DIN 69882-4 | With Bore to DIN 1835-2 Form B \

8mm I.D. HSK-50A GUHRING Whistle Notch Side Lock Holder, Coolant Through, 80mm Gage Length HSK-A to ISO 12164-1 / DIN 69893-1 | Balanced to G6.3 / 15,000 RPM | For Tool Shank to Tolerance h6 | Dimensions to DIN 69882-5 | From Bore Diameter 25mm With Two Clamping Screws | Includes Clamping Screw, Series No. 4903 and Adjustment Screw. Series No. 4334, Order Code 008.0500. Made in Germany, Guhring Part #9043340080500

8mm I.D. HSK-63A GUHRING Hydraulic Chuck w/Coolant & Radial Accessed Length Adjustment, 80mm Gage Length HSK-A to ISO 12164-1/DIN 69893-1 | balanced to G2.5 / 25,000 RPM | tremendous clamping force | maximum concentricity deviation 3 um | robust, radial operated length adjustment | 10mm length adjustability | for tool shank tolerance h6 | includes hex wrench for radial length setting | includes hexagon chuck key, Series no. 4912 | order coolant supply set 4949 separately. The use of reduction sleeves greatly improves the usefulness of a hydraulic chuck. Clamp directly on the cutting tool shank or use a reduction sleeve to hold a different diameter tool shank and increase transferable torque by approximately 25%. The reduction sleeve outside diameter must match your hydraulic chuck's nominal inside diameter. Reduction sleeves are available in 6 different O.D.s; 1/2\

8mm I.D. HSK-63A GUHRING Shrink Fit Holder With Conventional or MQL Coolant, 120mm Gage Length HSK-A to ISO12164-1 / DIN 69893-1 | Balanced to G2.5 / 25,000 RPM | Includes 4 or 6 M6 Balancing Screws | For Tool Shank Tolerance h6 | to DIN 69882-8 | Includes Setting Screw, Series No. 4977 or 4904 | For Conventional Cooling Order Coolant Supply Set, Series 4949 Separately | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4736, Order Code 208.0630. Made in Germany, Guhring Part #9047362080630

8mm I.D. HSK-63A GUHRING Shrink Fit Holder With Conventional or MQL Coolant, 160mm Gage Length HSK-A to ISO12164-1 / DIN 69893-1 | Balanced to G2.5 / 25,000 RPM | Includes 4 or 6 M6 Balancing Screws | For Tool Shank Tolerance h6 | to DIN 69882-8 | Includes Setting Screw, Series No. 4977 or 4904 | For Conventional Cooling Order Coolant Supply Set, Series 4949 Separately | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4736, Order Code 108.0630. Made in Germany, Guhring Part #9047361080630

8mm I.D. HSK-63A GuhrOJet Peripheral Coolant-Fed Weldon Side Lock End Mill Holder, 65mm Gage Length HSK-A to ISO 12164-1 / DIN 69893-1 | Balanced to G6.3 / 15,000 RPM | For Tool Shank Tolerance h6 | Bore to DIN 1835-2 Form \

8mm I.D. HSK-63C GUHRING Hydraulic Chuck w/Coolant & Increased Clamping Force, 60mm Gage Length HSK-C to ISO 12164-1 / DIN 69893-1 | balanced to G2.5 / 25,000 RPM | tremendous clamping force | maximum concentricity deviation 3 um | axial length adjustment | for tool shank tolerance h6 | includes adjustment screw, Series no. 4900 | includes hexagon chuck key, Series no. 4912 | order coolant supply set, Series No. 4949 separately. The use of reduction sleeves greatly improves the usefulness of a hydraulic chuck. Clamp directly on the cutting tool shank or use a reduction sleeve to hold a different diameter tool shank and increase transferable torque by approximately 25%. The reduction sleeve outside diameter must match your hydraulic chuck's nominal inside diameter. Reduction sleeves are available in 6 different O.D.s; 1/2\

8mm I.D. HSK-63C GUHRING Hydraulic Chuck w/Coolant & Radial Accessed Length Adjustment, 60mm Gage Length HSK-C to ISO 12164-1/DIN 69893-1 | balanced to G2.5 / 25,000 RPM | tremendous clamping force | maximum concentricity deviation 3 um | robust, radial operated length adjustment | 10mm length adjustability | for tool shank tolerance h6 | includes hex wrench for radial length setting | includes hexagon chuck key, Series no. 4912 | order coolant supply set 4949 separately. The use of reduction sleeves greatly improves the usefulness of a hydraulic chuck. Clamp directly on the cutting tool shank or use a reduction sleeve to hold a different diameter tool shank and increase transferable torque by approximately 25%. The reduction sleeve outside diameter must match your hydraulic chuck's nominal inside diameter. Reduction sleeves are available in 6 different O.D.s; 1/2\

8mm I.D. HSK-80A GUHRING Shrink Fit Holder With Conventional or MQL Coolant, 85mm Gage Length HSK-A to ISO12164-1 / DIN 69893-1 | Balanced to G2.5 / 25,000 RPM | Includes 4 or 6 M6 Balancing Screws | For Tool Shank Tolerance h6 | to DIN 69882-8 | Includes Setting Screw, Series No. 4977 or 4904 | For Conventional Cooling Order Coolant Supply Set, Series 4949 Separately | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4736, Order Code 008.0800. Made in Germany, Guhring Part #9047360080800

8mm I.D. ISO/SK-40 GUHRING Shrink Fit Holder With Conventional / MQL Coolant, 80mm Gage Length ISO Taper to DIN 69871 Form AD/B | Balanced to G2.5 / 25,000 RPM | For Tool Shank Tolerance h6 | Includes 4 or 6 M6 Balancing Screws | Includes Setting Screw, Series No. 4977 or 4904 | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4738, Order Code 008.0400. Made in Germany, Guhring Part #9047380080400

8mm I.D. ISO/SK-40 GUHRING Whistle Notch Side Lock Holder, Coolant Through, 50mm Gage Length SK to DIN ISO 7388-1 Form AD/B | With Bore to DIN 1835-2 Form E ?Whistle Notch\

8mm I.D. ISO/SK-40 GuhrOJet Peripheral Coolant-Fed Weldon Side Lock Holder, 100mm Gage Length ISO Taper to DIN 69871 Form AD/B | Balanced to G6.3 / 15,000 RPM | For Tool Shank Tolerance h6 | Bore to DIN 1835-2 Form \

8mm I.D. ISO/SK-50 GuhrOJet Peripheral Coolant-Fed Weldon Side Lock Holder, 63mm Gage Length ISO Taper to DIN 69871 Form AD/B | Balanced to G6.3 / 15,000 RPM | For Tool Shank Tolerance h6 | Bore to DIN 1835-2 Form \

8mm I.D. MAS/BT-40 GUHRING Shrink Fit Holder With Conventional / MQL Coolant, 90mm Gage Length MAS/BT to DIN ISO 7388-2 Form AD/B | Balanced to G2.5 / 25,000 RPM | For Tool Shank Tolerance h6 | Includes 4 or 6 M6 Balancing Screws | Includes Setting Screw, Series No. 4977 or 4904 | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4739, Order Code 008.0400. Made in Germany, Guhring Part #9047390080400

8mm I.D. x 20mm Nominal Size GUHRING Sealed Clamping Sleeve For HPC Clamping Chucks High holding torque | Sealed version with short slots | for clamping tools with straight shank | for tool shank to tolerance h6 | includes length setting screw. Series No. 4235, Order Code 008.0200. Made in Germany, Guhring Part #9042350080200

8mm Rf100 Sharp Standard Length

8mm RF100 Speed 4FL 48? Helix Super-A Coated Carbide Standard Length End Mill, Plain Shank, 20mm LOC, 63mm OAL 20MM LOC,8MM SHANK,63MM OAL RF 100 Speed 4-Flute Right Hand 48? Helix, Right Hand Cut, Center Cutting Standard Length High Performance Carbide End Mill, Plain Cylindrical Shank, .12mm x 45? Corner Chamfer, Super-A Coated for Slotting, Ramping, Helical Interpolation, Roughing and Finishing Stainless Steels, Steels and Nickel / Titanium Alloys Series 6765 Guhring Part #9067650080000

8mm RF100F 4FL Variable Helix Necked Plain Cylindrical Shank Firex Coated Carbide End Mill, 19mm LOC, 26mm Reach 19MM LOC,8MM SHANK,63MM OAL RF 100 F 4-Flute Right Hand 40?/42? Variable Helix, Right Hand Cut, Plain Cylindrical Shank, Extended Neck Relief, Standard Length, High Performance Center Cutting Carbide End Mill with .15mm x 45? Corner Chamfer, Firex Coated for Roughing, Slotting, Ramping, Helical Interpolation and Finishing Materials up to 30 HRc. Mild and Free-Cutting Steels, Unalloyed Heat-Treatable & Case Hardened Steels, Nitriding Steels, Stainless Steels, Grey Cast Iron, Copper, Brass, Bronze , Magnesium Alloys and Titanium Alloys. Series 3629 Guhring Part #9036290080000

8mm RF100F 4FL Variable Helix Necked Weldon Flat Shank Firex Coated Carbide End Mill, 19mm LOC, 26mm Reach 19MM LOC,8MM SHANK,63MM OAL RF 100 F 4-Flute Right Hand 40?/42? Variable Helix, Right Hand Cut, Weldon Flat Shank, Extended Neck Relief, Standard Length, High Performance Center Cutting Carbide End Mill with .15mm x 45? Corner Chamfer, Firex Coated for Roughing, Slotting, Ramping, Helical Interpolation and Finishing Materials up to 30 HRc. Mild and Free-Cutting Steels, Unalloyed Heat-Treatable & Case Hardened Steels, Nitriding Steels, Stainless Steels, Grey Cast Iron, Copper, Brass, Bronze , Magnesium Alloys and Titanium Alloys. Series 3630 Guhring Part #9036300080000

8mm RF100S/F90? 5FL 45? Helix Plain Cylindrical Shank Necked nano-A Coated Carbide End Mill, 24mm LOC, 32mm Reach 24MM LOC,8MM SHANK,75MM OAL RF 100 S/F 90? 5-Flute Right Hand 45? Helix, Right Hand Cut, Plain Cylindrical Shank, Extended Neck Reflief, Extra Long Length, High Performance Center Cutting Carbide End Mill with 90? Sharp Corners, Nano-A Coated for Universal Finishing Materials up to 48 HRc. Series 6763 Guhring Part #9067630080000

8mm RF100TI 4FL Variable Helix Super-A Carbide End Mill, Necked, Weldon Shank, 0.5mm Radius, 19mm LOC, 26mm Reach 19MM LOC,8MM SHANK,63MM OAL RF 100 Ti 4-Flute, Right Hand 35?/38? Variable Helix, Right Hand Cut, Weldon Flat Shank, Extended Neck Relief, Center Cutting Standard Length High Performance Carbide End Mill with 0.50mm Corner Radius, Super A Coated for Slotting, Ramping, Helical Interpolation, Roughing and Finishing Special and Titanium / Nickel Alloys Series 3499 Guhring Part #9034990080050

8mm RF100U 4FL Variable Helix Firex Carbide End Mill, Necked, Weldon Shank, 0.5mm Radius, 19mm LOC, 26mm Reach 19MM LOC,8MM SHANK,63MM OAL RF 100 U 4-Flute Right Hand 35?/38? Variable Helix, Right Hand Cut, Weldon Flat Shank, 0.50mm Corner Radius, Firex Coated, Extended Neck Relief, Center Cutting High Performance Standard Length Carbide End Mill For Roughing and Finishing Alloyed Steels, Cast Iron, Free Cutting Steels, Tool Steels, Hardened Steels, Titanium and Titanium Alloys & Other Special Alloys Up to 54 HRc Series 3873 Guhring Part #9038730080050

8mm RF100U 4FL Variable Helix Firex Carbide End Mill, Necked, Weldon Shank, 1.0mm Radius, 19mm LOC, 26mm Reach 19MM LOC,8MM SHANK,63MM OAL RF 100 U 4-Flute Right Hand 35?/38? Variable Helix, Right Hand Cut, Weldon Flat Shank, 1.00mm Corner Radius, Firex Coated, Extended Neck Relief, Center Cutting High Performance Standard Length Carbide End Mill For Roughing and Finishing Alloyed Steels, Cast Iron, Free Cutting Steels, Tool Steels, Hardened Steels, Titanium and Titanium Alloys & Other Special Alloys Up to 54 HRc Series 3873 Guhring Part #9038730080100

8mm RF100VA 4FL Variable Helix, Plain Shank Necked Carbide End Mill, nano-A Coated, 19mm LOC, 26mm Reach 19MM LOC,8MM SHANK,63MM OAL RF 100 VA 4-Flute Right Hand 36?/38? Variable Helix, Right Hand Cut, Plain Cylindrical Shank, .25mm x 45? Corner Chamfer, Nano-A Coated, Extended Neck Relief, Center Cutting High Performance Standard Length Carbide End Mill For Stainless Steels, Steels, Cast Iron, Titanium / Nickel Alloys & Other Special Super Alloys Up to 54 HRc Series 3800 Guhring Part #9038000080000

8mm RF100VA 4FL Variable Helix, Weldon Shank Necked Carbide End Mill, nano-A Coated, 12mm LOC, 38mm Reach 12MM LOC,8MM SHANK,75MM OAL RF 100 VA 4-Flute Right Hand 36?/38? Variable Helix, Right Hand Cut, Weldon Flat Shank, .25mm x 45? Corner Chamfer, Nano-A Coated, Extended Neck Relief, Center Cutting High Performance Long Length Carbide End Mill For Stainless Steels, Steels, Cast Iron, Titanium / Nickel Alloys & Other Special Super Alloys Up to 54 HRc Series 3807 Guhring Part #9038070080000

8mm RF100VA 4FL Variable Helix, Weldon Shank Necked Carbide End Mill, nano-A Coated, 19mm LOC, 26mm Reach 19MM LOC,8MM SHANK,63MM OAL RF 100 VA 4-Flute Right Hand 36?/38? Variable Helix, Right Hand Cut, Weldon Flat Shank, .25mm x 45? Corner Chamfer, Nano-A Coated, Extended Neck Relief, Center Cutting High Performance Standard Length Carbide End Mill For Stainless Steels, Steels, Cast Iron, Titanium / Nickel Alloys & Other Special Super Alloys Up to 54 HRc Series 3803 Guhring Part #9038030080000

8mm RF100VA Ball Nose 4FL Variable Helix, Plain Shank, Necked Carbide End Mill, nano-A Coated, 19mm LOC, 26mm Reach 19MM LOC,8MM SHANK,63MM OAL RF 100 VA Ball Nose 4-Flute Right Hand 36?/38? Variable Helix, Right Hand Cut, Plain Cylindrical Shank, Nano-A Coated, Extended Neck Reflief, Center Cutting High Performance Standard Length Carbide End Mill For Stainless Steels, Steels, Cast Iron, Titanium / Nickel Alloys & Other Special Super Alloys Up to 54 HRc Series No. 6707, Order Code 008.0000, Guhring Part #9067070080000

8mm Rough-Tech 56 Necked 4FL Fine Tooth Carbide Rougher, Weldon Flat Shank, nano-Si Coated, 19mm LOC, 27mm Reach 19MM LOC,8MM SHANK,63MM OAL ROUGH-TECH 56 / GS 100 H Right Hand 20? Helix, Right Hand Cut, 4 Flute Standard Length, Extended Neck Relief, Center Cutting High Performance Fine Tooth Carbide Rougher, Weldon Flat Shank, .30mm x 45? Corner Chamfer, nano-Si Coated for Ramping and Helical Interpolation Roughing Alloyed Steels, Tool Steels, Cast Iron, Nickel & Titanium Alloys and Hardened Steels to 56 HRc Series 3682 Guhring Part #9036820080000

8mm Trace-Tech 4FL Torus Grind Hard Profile Cutter, Plain Shank, Carbide nano-Si Coated, 63mm Reach, 1mm Radius 12MM LOC,8MM SHANK,100MM OAL TRACE-TECH / GF 300 T 4 Flute Right Hand 30? Helix, Right Hand Cut, Extended Neck Relief, Extra Long Length, Torus Grind, Plain Cylindrical Shank, Center Cutting Carbide Hard Profile Cutter, nano-Si Coated. For precision contouring and die & mold work. Performs roughing, finishing, ramping, helical interpolation and copy milling in cast iron, steels and hardened steels to 62 HRc, with 1.00mm Radius Series 3362 Guhring Part #9033620080000

8mm Uni-Pro 2FL Necked 30? Helix X-Long Carbide End Mill, Plain Shank, Firex Coated, 40mm LOC, 100mm OAL, 64mm Reach 40MM LOC,8MM SHANK,100MM OAL UNI-PRO Right Hand 30? Helix, Right Hand Cut, 2 Flute Extra Long Length Universal General Purpose Center Cutting Carbide End Mill with .10mm x 45? Corner Chamfer, 64mm Extended Neck Relief, Plain Cylindrical Shank, Firex Coated Series 3021 Guhring Part #9030210080000

8mm Uni-Pro 3FL Necked 30? Stub Length Carbide End Mill, Plain Shank, Firex Coated, 9mm LOC, 58mm OAL, 22mm Reach 9MM LOC,8MM SHANK,58MM OAL UNI-PRO Right Hand 30? Helix, Right Hand Cut, 3 Flute Stub Length Universal General Purpose Center Cutting Carbide End Mill with .10mm x 45? Corner Chamfer, 22mm Extended Neck Relief, Plain Cylindrical Shank, Firex Coated Series 3558 Guhring Part #9035580080000

8x1/2x1 1/2 HSS Sm Alu, 20 Stg KEO Part #4620

8x1/2x1 1/2 HSS Sm, 28 Stg TiN Coated KEO Part #2671

8x1/4x1 1/2 HSS Sm, 28 Stg, TiALN Coated KEO Part #84347

8x1/4x1 1/4 HSS Sm, 34 Str KEO Part #6250

8x1/8x1 1/2 HSS Slitting Saw, 48 Stg TiN Coated KEO Part #7971

8x11/32x1 1/2 HSS Sm, 28 Stg KEO Part #2570

8x11/32x1 1/4 HSS Sm, 28 Stg TiN Coated KEO Part #2561

8x13/16x1 1/4 HSS Sm, 34 Str TiN Coated KEO Part #6341

8x13/32x1 1/4 HSS Sm, 28 Stg, TiALN Coated KEO Part #84356

8x15/32x1 1/2 HSS Sm, 28 Stg, TiALN Coated KEO Part #84361

8x15/32x1 1/2 HSS Sm, 28 Stg, TiCN Coated KEO Part #83988

8x17/32x1 1/2 HSS Sm, 28 Stg, TiALN Coated KEO Part #84365

8x3/16x1 1/2 HSS Sm, 28 Stg, TiCN Coated KEO Part #83970

8x3/8x1 1/2 HSS Sm, 28 Stg KEO Part #2590

8x3/8x1 1/4 HSS Sm, 34 Str KEO Part #6270

8x5/32x1 1/2 HSS Slitting Saw, 48str,TiCN Coated KEO Part #80508

8x5/32x1 1/2 HSS Slitting Saw,48stg,TiALN Coated KEO Part #80775

8x5/32x1 1/4 HSS Slitting Saw, 48 Str KEO Part #8910

8x5/8x1 1/4 HSS Sm, 34 Str ,TiALN Coated KEO Part #84858

8x7/32x1 1/2 HSS Slitting Saw, 48stg,TiCN Coated KEO Part #80710

8x7/32x1 1/2 HSS Sm, 28 Stg, TiCN Coated KEO Part #83972

8x9/16x1 1/2 HSS Sm, 28 Stg KEO Part #2710

8x9/32x1 1/2 HSS Sm, 28 Stg, TiCN Coated KEO Part #83976

9.0mm I.D. ER25 GUHRING Tap Collet For Metric Taps to DIN Standards. 9.0mm Shank Diameter x 7.0mm Square Width Elastic Spring Steel Collets With Bore to Match Tap Shank Diameter Exactly And Square Drive For Accuracy And Rigidity. Series No. 4308, Order Code 009.0250. Made in Germany, Guhring Part #9043080090250

9.1mm Carbide 140? Point RT100VA 3xD nano-A? Coated Coolant Fed Drill, Reinforced Straight Shank, 47mm LOC 47mm LOC,89mm OAL,10mm Shank Series No. 8510, Order Code 09.100, Guhring Part #9085100091000

9.1mm Diameter Carbide 118? 4-Facet Point General Purpose Stub Length Drill, Bright Finish, 40mm LOC, 84mm OAL 40mm LOC,84mm OAL,9.1mm Shank Series No. 730, Order Code 09.100, Guhring Part #9007300091000

9.1mm Diameter Carbide 140? Point RT100US 3xD nano-A? Coated Drill, Reinforced Straight Shank, 47mm LOC 47mm LOC,89mm OAL,10mm Shank Series No. 5741, Order Code 09.100, Guhring Part #9057410091000

9.1mm Diameter Cobalt 118? 4-Facet Point Universal Stub Length Drill, TiN Coated, 40mm LOC, 84mm OAL 40mm LOC,84mm OAL,9.1mm Shank Series No. 5520, Order Code 09.100, Guhring Part #9055200091000

9.1mm Diameter Cobalt 130? Point Angle GT100 Parabolic Flute Jobber Length Drill, Nitrided Lands, 81mm LOC 81mm LOC,125mm OAL,9.1mm Shank Series No. 622, Order Code 09.100, Guhring Part #9006220091000

9.1mm Diameter Cobalt General Purpose Left Hand Cut 118? Point Jobber Length Drill, Steam Oxide Finish, 81mm LOC 81mm LOC,125mm OAL,9.1mm Shank Series No. 308, Order Code 09.100, Guhring Part #9003080091000

9.1mm Diameter HSS Low Helix 118? Point Angle Jobber Length Drill, Bright Finish, 81mm LOC 81mm LOC,125mm OAL,9.1mm Shank Series No. 206, Order Code 09.100, Guhring Part #9002060091000

9.25mm Carbide 140? Point RT100U 3xD nano-Firex? Coated Coolant Fed Drill, Reinforced Straight Shank, 47mm LOC 47mm LOC,89mm OAL,10mm Shank Series No. 5510, Order Code 09.250, Guhring Part #9055100092500

9.25mm Carbide 140? Point RT100US 5xD nano-A? Coated Coolant Fed Drill, Reinforced Straight Shank, 61mm LOC 61mm LOC,103mm OAL,10mm Shank Series No. 5744, Order Code 09.250, Guhring Part #9057440092500

9.25mm Carbide 140? Point RT100VA 3xD nano-A? Coated Coolant Fed Drill, Reinforced Straight Shank, 47mm LOC 47mm LOC,89mm OAL,10mm Shank Series No. 8510, Order Code 09.250, Guhring Part #9085100092500

9.25mm Diameter General Purpose Cobalt 118? Point Angle Jobber Length Drill, Steam Oxide Finish, 81mm LOC 81mm LOC,125mm OAL,9.25mm Shank Series No. 305, Order Code 09.250, Guhring Part #9003050092500

9.2mm Carbide 140? Point RT100US 7xD nano-A? Coated Coolant Fed Drill, Reinforced Straight Shank, 95mm LOC 95mm LOC,139mm OAL,10mm Shank Series No. 5746, Order Code 09.200, Guhring Part #9057460092000