General Purpose Friction-Ring Stem Caster, Swivel Caster, 125 lb Load Rating, 0 to 299 lb, 3 in Wheel Dia., 1 in Wheel Width, Polyurethane Wheel/Tread Material, 3 5/8 in Mounting Height, Plain, 7/16 in x 1-3/8 in Caster Stem Size, Friction Ring, Steel Caster Frame Material, Zinc Plated Frame Finish, Yes Non-Marking, 1 Number of Wheels
General Purpose Motor, Single Phase, Motor Design Capacitor-Start/Run, 3/4 HP, Nameplate RPM 3,450, No. of Speeds 1, Voltage 115/208-230V AC, Full Load Amps 7.2/4.0-3.6, 48 Frame, Hz 60, Motor Service Factor 1.25, Max. Ambient Temp. 104 Degrees F, Motor Thermal Protection Auto, Duty Cycle Continuous, Ins. Class B, Motor Enclosure Design Open Dripproof, Motor Shaft Rotation CW/CCW, Motor Mounting Type Rigid Base, Motor Mounting Position Horizontal or Vertical Shaft Down, Inverter Rated No
General Purpose Threaded Stem Caster, Swivel Caster, 150 lb Load Rating, 0 to 299 lb, 3 in Wheel Dia., 1 1/4 in Wheel Width, Rubber Wheel/Tread Material, 3 13/16 in Mounting Height, Plain, 1/2 In.-13 x 1 in Caster Stem Size, Threaded, Steel Caster Frame Material, Zinc Plated Frame Finish, No Non-Marking, 1 Number of Wheels
General Purpose Threaded Stem Caster, Swivel Caster, 210 lb Load Rating, 0 to 299 lb, 3 in Wheel Dia., 1 1/4 in Wheel Width, Polyolefin Wheel/Tread Material, 3 13/16 in Mounting Height, Delrin, 7/16 In.-14 x 1-1/2 in Caster Stem Size, Threaded, Steel Caster Frame Material, Zinc Plated Frame Finish, Yes Non-Marking, 1 Number of Wheels
Granular Sorbent, Fluids Absorbed Universal, Specific Liquid Compatibility Acids, Grease, Ink, Oil, Other Liquid Spills, Paints, Water, Container Type Pail, Composition Detail Attapulgite Clay, Container Type and Capacity 20 lb Pail, Weight 20 lb, Volume 166.9 gal, Volume Absorbed per Pkg. 2 gal, Granular Grade 24/48 Mesh, Deodorizing Yes
Gun Safe, Color Black, Net Weight 506 lb, Capacity 17.7 cu ft, Fire Rating 1/2 hr, Material Steel, Finish Textured, Finger Print Memory No, Lock Style Electronic, 4 Number of Shelves, Number of Bolts 6, Outside Height 59 in, Outside Width 30 in, Outside Depth 24 in, Inside Height 56 in, Inside Width 28 1/2 in, Inside Depth 19 1/4 in, Door Opening Height 49 in, Door Opening Width 20 in, Door Plate Thickness 2 39/50 mm, Wall Thickness 2 39/50 mm, Holds (24) Guns
Hand Stamp, Character Height 5/16 in, Character Type Set Individual Character, Characters Included F, Duty Heavy, For Maximum Surface Hardness 50 on A Rockwell C Scale, For Shank Diameter 5/16 in, Holder Length Not Applicable, Holder Shank Size Not Applicable, Impression Character Style Gothic, Includes G, Letter Casing Uppercase, Product Type Hand Stamp Kit, Shank Length 2 1/2 in, Shank Thickness 5/16 in, Shank Width 5/16 in, Stamp Material Steel, Standards Not Applicable
Hardened Steel Washer, Flat Washer Type Standard, Dimensional Standards ASTM F436, Material Steel, Material Grade/Class Grade 8, Finish Hot Dipped Galvanized, For Screw Size 5/8 in, Inside Diameter 0.688 in, Outside Diameter 1 5/16 in, Maximum Thickness 0.177 in, System of Measurement Inch, Minimum Thickness 0.122 in, Color White, Inside Diameter Tolerance -0 to +0.03125 in, Made in North America No, Manufacturer Location Globally Sourced, Material Quality Standards ASTM F436
Hardened Steel Washer, Flat Washer Type Standard, Material Steel, Material Grade/Class Grade 8, Finish Black Oxide, For Screw Size 1 1/8 in, Inside Diameter 1.125 in, Outside Diameter 2 1/4 in, Maximum Thickness 0.051 in, System of Measurement Inch, Minimum Thickness 0.08 in, Material Quality Standards ASTM F436, Pack Size Small Pack, Package Quantity 5
Hardened Steel Washer, Flat Washer Type Standard, Material Steel, Material Grade/Class Grade 8, Finish Black Oxide, For Screw Size 1/2 in, Inside Diameter 0.5 in, Outside Diameter 1 1/16 in, Maximum Thickness 0.136 in, System of Measurement Inch, Minimum Thickness 0.177 in, Material Quality Standards ASTM F436, Pack Size Small Pack, Package Quantity 25
Heat-Resistant Nylon Tread Wheel, 600 lb Load Rating, 300 to 999 lb Load Rating Range, 3 in Wheel Dia., 1 3/8 in Wheel Width, Nylon Wheel/Tread Material, Hard, 75 Shore D, Plain, Standard Tread Shape, 1/2 in For Axle Size, Not Included Includes Spanner Bushing, Plastic Wheel Core Material, Yes Non-Marking, 1 1/2 in Hub Length