CategoryIdL1: 12

Products with this attribute (1366 total)

PARBARB - MALE CONNECTOR
PARBARB ADAPTOR
PARBARB CONNECTOR
PARBARB NIPPLE
Parker's hose barb fittings are an economical choice for general purpose fluid handling and pneumatics. Manufactured in both tapered and beaded hose barb styles hose barbs are reusable and offer good vibration resistance. These hose barb fittings are intended for use with Parker's 97HC hose clamps, similar type clamps or a crimped ferrule. Parker's hose barb fittings are available for both inch and metric size hoses with NPTF, BSPT, SAE straight thread and metric threads. Markets: Industrial Construction Heavy duty truck Mobile Features/Benefits: Beaded Hose barb to straight thread port connections Up to 1? hose, -14 SAE and M33 Eliminates system contamination from rust One piece forging Smaller than J1231 steel alternatives for use in confined areas Applications: Compressed air lines Water lines Cooling lines
Parker's hose barb fittings are an economical choice for general purpose fluid handling and pneumatics. Manufactured in both tapered and beaded hose barb styles hose barbs are reusable and offer good vibration resistance. These hose barb fittings are intended for use with Parker's 97HC hose clamps, similar type clamps or a crimped ferrule. Parker's hose barb fittings are available for both inch and metric size hoses with NPTF, BSPT, SAE straight thread and metric threads. Markets: Industrial Construction Heavy duty truck Mobile Features/Benefits: Beaded Hose barb to straight thread port connections Up to 1? hose, -14 SAE and M33 Eliminates system contamination from rust One piece forging Smaller than J1231 steel alternatives for use in confined areas Applications: Compressed air lines Water lines Cooling lines
Parker's MPT II Nonconductive Multipurpose Oil Resistant Hose provides excellent service across multiple applications. The hose is electrically nonconductive, protecting operators from electrical shock. The red cover is easily identified and is resistant to abrasion, oil and weathering to provide maximum performance. MPT II hose is available in long continuous lengths for efficient inventory management and maximum utility at cramped or hard to reach job sites. The hose is qualified with permanent crimp couplings for a safe and secure connection and is a versatile hose for many common industrial applications. Markets: - Agriculture - Construction - General Industrial Features/Benefits: - Tube: Black nitrile for oil compatibility and versatile service to 212 DegF. - Reinforcement: Multiple textile plies for strength and kink resistance. - Cover: Black or red chloroprene for abrasion, oil and weathering resistance. - Couplings: Qualified with steel crimp couplings for a durable, safe and secure connection. Applications: - Air - Oil - Mild chemicals - Water - Air compressors and pneumatic tools, including those subject to light oil mists for lubrication - Lubrication systems - General transfer Safety/Technical: - Design Factor 4:1 - Do not use with biodiesel, diesel fuel or gasoline. - Do not use in dry air applications typically, air systems that do not expose the tube of the hose to lubricating oil mist from the compressor. - The user must determine if the hose is suitable for applications subject to electrical hazard. Contact us for additional information. - Refer to CrimpSource for current crimp specifications. Warnings: - Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.
Parker's Par-Barb fittings are injection molded from high strength chemically inert white nylon and black polypropylene materials. Both materials are FDA and NSF-51 compliant. Par-Barb fittings are specially engineered with a four barb design that generates the maximum gripping and sealing power when combined with a hose clamp. Available in barbed, pipe and garden hose configurations ranging in sizes from 1/8? to 1 1?2?. Use with a variety of rubber tubing and hoses and the following Parker Parflex Division tubing. Polyurethane 90-95 Durometer Shore A Vinyl Markets: Water Beverage Semi-conductor Filtration Food Features/Benefits: Molded from high strength chemically inert thermoplastic materials Multiple barb design generates maximum gripping and sealing Meets FDA and NSF-51 requirements for food contact White Nylon and Black Polypropylene material 1/8'' I.D. - 1 1/2'' I.D. Applications: Water Irrigation Reverse Osmosis Deionized water systems Pollution control Custom configurations and sizes are available upon request. Contact us for additional information.
Parker's Par-Barb fittings are injection molded from high strength chemically inert white nylon and black polypropylene materials. Both materials are FDA and NSF-51 compliant. Par-Barb fittings are specially engineered with a four barb design that generates the maximum gripping and sealing power when combined with a hose clamp. Available in barbed, pipe and garden hose configurations ranging in sizes from 1/8? to 1 1?2?. Use with a variety of rubber tubing and hoses and the following Parker Parflex Division tubing. Polyurethane 90-95 Durometer Shore A Vinyl Markets: Water Beverage Semi-conductor Filtration Food Features/Benefits: Molded from high strength chemically inert thermoplastic materials Multiple barb design generates maximum gripping and sealing Meets FDA and NSF-51 requirements for food contact White Nylon and Black Polypropylene material 1/8'' I.D. - 1 1/2'' I.D. Applications: Water Irrigation Reverse Osmosis Deionized water systems Pollution control Custom configurations and sizes are available upon request. Contact us for additional information.
Parker's Par-Barb fittings are injection molded from high strength chemically inert white nylon and black polypropylene materials. Both materials are FDA and NSF-51 compliant. Par-Barb fittings are specially engineered with a four barb design that generates the maximum gripping and sealing power when combined with a hose clamp. Available in barbed, pipe and garden hose configurations ranging in sizes from 1/8? to 1 1?2?. Use with a variety of rubber tubing and hoses and the following Parker Parflex Division tubing. Polyurethane 90-95 Durometer Shore A Vinyl Markets: Water Beverage Semi-conductor Filtration Food Features/Benefits: Molded from high strength chemically inert thermoplastic materials Multiple barb design generates maximum gripping and sealing Meets FDA and NSF-51 requirements for food contact White Nylon and Black Polypropylene material 1/8'' I.D. - 1 1/2'' I.D. Applications: Water Irrigation Reverse Osmosis Deionized water systems Pollution control Custom configurations and sizes are available upon request. Contact us for additional information.
Parker's Par-Barb fittings are injection molded from high strength chemically inert white nylon and black polypropylene materials. Both materials are FDA and NSF-51 compliant. Par-Barb fittings are specially engineered with a four barb design that generates the maximum gripping and sealing power when combined with a hose clamp. Available in barbed, pipe and garden hose configurations ranging in sizes from 1/8? to 1 1?2?. Use with a variety of rubber tubing and hoses and the following Parker Parflex Division tubing. Polyurethane 90-95 Durometer Shore A Vinyl Markets: Water Beverage Semi-conductor Filtration Food Features/Benefits: Molded from high strength chemically inert thermoplastic materials Multiple barb design generates maximum gripping and sealing Meets FDA and NSF-51 requirements for food contact White Nylon and Black Polypropylene material 1/8'' I.D. - 1 1/2'' I.D. Applications: Water Irrigation Reverse Osmosis Deionized water systems Pollution control Custom configurations and sizes are available upon request. Contact us for additional information.
Parker's Par-Barb fittings are injection molded from high strength chemically inert white nylon and black polypropylene materials. Both materials are FDA and NSF-51 compliant. Par-Barb fittings are specially engineered with a four barb design that generates the maximum gripping and sealing power when combined with a hose clamp. Available in barbed, pipe and garden hose configurations ranging in sizes from 1/8? to 1 1?2?. Use with a variety of rubber tubing and hoses and the following Parker Parflex Division tubing. Polyurethane 90-95 Durometer Shore A Vinyl Markets: Water Beverage Semi-conductor Filtration Food Features/Benefits: Molded from high strength chemically inert thermoplastic materials Multiple barb design generates maximum gripping and sealing Meets FDA and NSF-51 requirements for food contact White Nylon and Black Polypropylene material 1/8'' I.D. - 1 1/2'' I.D. Applications: Water Irrigation Reverse Osmosis Deionized water systems Pollution control Custom configurations and sizes are available upon request. Contact us for additional information.
Parker's Par-Barb fittings are injection molded from high strength chemically inert white nylon and black polypropylene materials. Both materials are FDA and NSF-51 compliant. Par-Barb fittings are specially engineered with a four barb design that generates the maximum gripping and sealing power when combined with a hose clamp. Available in barbed, pipe and garden hose configurations ranging in sizes from 1/8? to 1 1?2?. Use with a variety of rubber tubing and hoses and the following Parker Parflex Division tubing. Polyurethane 90-95 Durometer Shore A Vinyl Markets: Water Beverage Semi-conductor Filtration Food Features/Benefits: Molded from high strength chemically inert thermoplastic materials Multiple barb design generates maximum gripping and sealing Meets FDA and NSF-51 requirements for food contact White Nylon and Black Polypropylene material 1/8'' I.D. - 1 1/2'' I.D. Applications: Water Irrigation Reverse Osmosis Deionized water systems Pollution control Custom configurations and sizes are available upon request. Contact us for additional information.
Parker's Par-Barb fittings are injection molded from high strength chemically inert white nylon and black polypropylene materials. Both materials are FDA and NSF-51 compliant. Par-Barb fittings are specially engineered with a four barb design that generates the maximum gripping and sealing power when combined with a hose clamp. Available in barbed, pipe and garden hose configurations ranging in sizes from 1/8? to 1 1?2?. Use with a variety of rubber tubing and hoses and the following Parker Parflex Division tubing. Polyurethane 90-95 Durometer Shore A Vinyl Markets: Water Beverage Semi-conductor Filtration Food Features/Benefits: Molded from high strength chemically inert thermoplastic materials Multiple barb design generates maximum gripping and sealing Meets FDA and NSF-51 requirements for food contact White Nylon and Black Polypropylene material 1/8'' I.D. - 1 1/2'' I.D. Applications: Water Irrigation Reverse Osmosis Deionized water systems Pollution control Custom configurations and sizes are available upon request. Contact us for additional information.
Parker's Par-Barb fittings are injection molded from high strength chemically inert white nylon and black polypropylene materials. Both materials are FDA and NSF-51 compliant. Par-Barb fittings are specially engineered with a four barb design that generates the maximum gripping and sealing power when combined with a hose clamp. Available in barbed, pipe and garden hose configurations ranging in sizes from 1/8? to 1 1?2?. Use with a variety of rubber tubing and hoses and the following Parker Parflex Division tubing. Polyurethane 90-95 Durometer Shore A Vinyl Markets: Water Beverage Semi-conductor Filtration Food Features/Benefits: Molded from high strength chemically inert thermoplastic materials Multiple barb design generates maximum gripping and sealing Meets FDA and NSF-51 requirements for food contact White Nylon and Black Polypropylene material 1/8'' I.D. - 1 1/2'' I.D. Applications: Water Irrigation Reverse Osmosis Deionized water systems Pollution control Custom configurations and sizes are available upon request. Contact us for additional information.
Parker's Series 7107 Grizzly 500 Nonconductive Oil Resistant Multipurpose Industrial Hose provides excellent service across multiple heavy duty applications. The hose is electrically nonconductive and flame retardant, protecting operators from electrical shock and fire hazards. The distinctive bright yellow cover is easily identified, and the abrasion, oil and weather resistant hose is qualified with permanent crimp couplings for a safe and secure connection. Series 7107 provides the most robust service in its class. Markets: - Agriculture - Construction - Foundries - General Industrial - Mining Features/Benefits: - Tube: Black Class A nitrile for exceptional oil resistance to 212 DegF. - Reinforcement: Multiple aramid plies for extreme strength and a trim profile. - Cover: Yellow nitrile/PVC blend for abrasion, flame oil, weathering resistance and easy identification. - Couplings: Qualified with steel crimp couplings for a durable, safe and secure connection. - Lengths: Available in optional 200-foot continuous lengths 2'' ID only for maximum efficiency of inventory. Applications: - Air - Mild chemicals - Oil - Water - Air compressors and pneumatic tools, including those subject to light oil mists for lubrication - Construction equipment - Mining equipment - General transfer Safety/Technical: - Design Factor 4:1 - Do not use with biodiesel, diesel fuel or gasoline. - Do not use in dry air applications typically, air systems that do not expose the tube of the hose to lubricating oil mist from the compressor. - The user must determine if the hose is suitable for applications subject to electrical hazard. Contact us for additional information. - Refer to CrimpSource for current crimp specifications.
PILOT REG 1/4 NON-REL,GAG
PILOT REGULATOR 1 1/4"
PILOT REGULATOR 3"NON-REL
PISTON REG 1/4 SET-75
Plastic Tubing Pan-10X1,5-Ge Standard O.D. Tubing, Can Withstand High Thermal And Mechanical Loads. Outside Diameter=10 Mm, Bending Radius Relevant For Flow Rate=58 Mm, Inside Diameter=7 Mm, Min. Bending Radius=27 Mm, Tubing Characteristics=Suitable For Energy Chains In Applications With High Cycle Rates
Plastic Tubing PAN-4X0,75-NT
Plastic Tubing PFAN-12X1,75-NT
Plastic Tubing Ptfen-5/32-Nt-300 Outside Diameter=3,97 Mm, Bending Radius Relevant For Flow Rate=32 Mm, Inside Diameter=2,9 Mm, Min. Bending Radius=32 Mm, Temperature Dependent Operating Pressure=-0,95 - 12 Bar
Plastic Tubing PUN-CM-12-SW
Plastic Tubing PUN-H-1/4-RT-150-CB
Plastic Tubing Pun-H-16X2,5-Nt Approved For Use In Food Processing (Hydrolysis Resistant) Outside Diameter=16 Mm, Bending Radius Relevant For Flow Rate=88 Mm, Inside Diameter=11 Mm, Min. Bending Radius=38 Mm, Tubing Characteristics=Suitable For Energy Chains In Applications With High Cycle Rates
Plastic Tubing PUN-V0-10X1,5-GE
Plastic Tubing Pun-V0-8X2-Sw-C Flame Retardant Outside Diameter=8 Mm, Bending Radius Relevant For Flow Rate=35 Mm, Inside Diameter=4 Mm, Min. Bending Radius=9 Mm, Tubing Characteristics=Suitable For Energy Chains In Applications With High Cycle Rates
Plug Socket NTSD-GD-9
Plug Socket With Cable KMPPE-B-2,5
Pneumatic Actuated Ball Valve, Body Material CPVC, Body Style 2-Way, Valve Structure 2-Piece, Pipe Size 1 1/2 in, Tube Size 1 1/2 in, Connection Type Socket/Thread, Full Port, Max. Pressure 250 psi CWP, Max. Steam Pressure NA, Required Pressure 80 psi, Max. Inlet Pressure 120 psi, Temp. Range 0 Degrees to 160 Degrees F, Ball Material CPVC, Seat Material PTFE, Stem Type Blowout Proof, Stem Material CPVC, Body Seal Material EPDM, Hose I.D. 1 1/2 in, Standards NSF-61
Pneumatic Actuated Ball Valve, Body Material CPVC, Body Style 2-Way, Valve Structure 2-Piece, Pipe Size 1/2 in, Tube Size 1/2 in, Connection Type Socket/Thread, Full Port, Max. Pressure 250 psi CWP, Max. Steam Pressure NA, Required Pressure 80 psi, Max. Inlet Pressure 120 psi, Temp. Range 0 Degrees to 160 Degrees F, Ball Material CPVC, Seat Material PTFE, Stem Type Blowout Proof, Stem Material CPVC, Body Seal Material FPM, Hose I.D. 1/2 in, Standards NSF-61
Pneumatic Actuated Ball Valve, Body Material Forged Brass, Body Style Inline, Valve Structure 2-Piece, Pipe Size 1 in, Connection Type FNPT, Full Port, Max. Pressure 600 psi CWP, Required Pressure 80 psi, Max. Inlet Pressure 120 psi, Temp. Range -4 Degrees to 176 Degrees F, Ball Material Chrome Plated Brass, Seat Material PTFE, Stem Material Nickel Plated Brass, Body Seal Material PTFE/Viton, Standards NEMA 4X
Pneumatic Actuated Ball Valve, Body Material Stainless Steel, Body Style Inline, Valve Structure 3-Piece, Pipe Size 3 in, Connection Type FNPT, Full Port, Max. Pressure 1000 psi CWP, Max. Steam Pressure 150 psi WSP, Required Pressure 80 psi, Max. Inlet Pressure 120 psi, Temp. Range -4 Degrees to 176 Degrees F, Ball Material 316 Stainless Steel, Seat Material RTFE, Stem Material 316 Stainless Steel, Body Seal Material RPTFE, Standards NEMA 4X
Pneumatic Oil Filter, Filter Type Coalescing, Air Inlet Size 1/2 in, Air Inlet Type NPT, Maximum Flow Rate 46 cfm, Maximum Operating Pressure 300 psi, Maximum Operating Temperature 180 Degrees F, Overall Width 2 3/8 in, Overall Height 5 9/16 in, Drain Included Yes, Filter Bowl Material Stainless Steel, Drain Type Manual, Series SM2, Air Outlet Size 1/2 in, Air Outlet Type NPT, Body Material 316 Stainless Steel, Filter Bowl Capacity 4 oz, Filter Element Material Borosilicate Fiber
Pneumatic Valve J-5-1/8-B
Pneumatic Valve J-5/2-D-1-C 5/2-Way Valve, Bistable, Pneumatically Operated Valve Function=5/2 Bistable, Type Of Actuation=Pneumatic, Width=42 Mm, Standard Nominal Flow Rate=1200 L/Min, Operating Pressure=-0,9 - 16 Bar
Pneumatic Valve VL-5/3G-3/4-D-4
Pneumatic Valve VL-5/3G-3/8-B-EX
Pneumatic Valve VUWS-L25-M52-A-N14
Pneumatic Valve VUWS-L30-M32C-M-G38
Pneumatic Valve VUWS-L30-M52-A-G38
Precision Pressure Regulator MS6N-LRPB-1/2-D4-A8
Pressure Regulator LR-1/4-D-7-O-MINI
Pressure Regulator Lrs-1/4-D-7-O-I-Midi With Increased Return Flow, With Lockable Regulator Head, Working Pressure Up To 7 Bar. Size=Midi, Series=D, Actuator Lock=Rotary Knob With Integrated Lock, Assembly Position=Any, Design Structure=Directly-Controlled Diaphragm Regulator
Pressure Regulator Lrs-3/8-D-I-Mini With Increased Return Flow, With Lockable Regulator Head, Working Pressure Up To 12 Bar. Size=Mini, Series=D, Actuator Lock=Rotary Knob With Integrated Lock, Assembly Position=Any, Design Structure=Directly-Controlled Diaphragm Regulator
Pressure Sensor Spaw-P50R-G14F-2P-M12 For Measuring Media Pressures, Pressure Measuring Range Between 0 And +50 Bar, Pneumatic Connection Female Thread G1/4. Authorisation=(* Rcm Mark, * C Ul Us - Listed (Ol)), Ce Mark (See Declaration Of Conformity)=To Eu Directive For Emc, Materials Note=(* Contains Pwis Substances, * Conforms To Rohs), Measured Variable=Relative Pressure, Measurement Method=Thin Metal Film Pressure Sensor
PRESSURE SWITCH ASSEMBLY
PRESSURE SWITCH MODULAR
PRESSURE SWITCH MODULAR
PRESSURE SWITCH MODULAR
PRESSURE SWITCH MODULAR
PRESSURE SWITCH MODULAR
PRH180M 1",BOOSTER
Pro High Flow Plug, 3/8" MNPT, 1/4" Body
Proportional Pressure Regulator VPPL-3L-3-G14-0L40H-V1-V-S1-7
Proximity Sensor Sieh-M12B-Po-S-L Inductive, For Large Switching Distances. Conforms To Standard=En 60947-5-2, Authorisation=(* C-Tick, * C Ul Us - Listed (Ol)), Ce Mark (See Declaration Of Conformity)=To Eu Directive For Emc, Materials Note=Free Of Copper And Ptfe, Nominal Switching Distance=4 Mm
PSTN REG1/8,0-125,NUT,GAG
PU10MM-1-100
Push-In Bulkhead Connector Qss-6-100 Size=Standard, Nominal Size=5 Mm, Assembly Position=Any, Container Size=100, Design Structure=Push/Pull Principle
Push-In Connector CRQS-10-8
Push-In Connector QB-5/16T-1/4-U
Push-In Fitting CRQS-1/4-3/8-U
Push-In L-Connector Qsl-3/8H-5/16-U With Push-In Sleeve. Size=Standard, Nominal Size=4,9 Mm, Assembly Position=Any, Container Size=1, Design Structure=Push/Pull Principle
Push-In L-Connector QSL-5/16H-U
Push-In L-Fitting NPQM-L-G38-Q8-P10
Push-In L-Fitting Qbl-1/2-3/8-U 360? Orientable, Male Thread With External Hexagon. Size=Standard, Nominal Size=0,315 ", Type Of Seal On Screw-In Stud=Coating, Assembly Position=Any, Design Structure=Push/Pull Principle
Push-In L-Fitting QBL-3/8-1/2-U-M
Push-In L-Fitting QSL-G1/8-6-100
Push-In L-Fitting, Rotatable Qsrl-G3/8-12 360? Rotatable, With Ball Bearing, Male Thread With External Hexagon. Size=Standard, Nominal Size=7,4 Mm, Type Of Seal On Screw-In Stud=Sealing Ring, Assembly Position=Any, Container Size=1
Push-In T-Connector Qbt-1/2T-U Size=Standard, Nominal Size=0,354 ", Assembly Position=Any, Design Structure=Push/Pull Principle, Operating Pressure Complete Temperature Range=-13,8 - 145 Psi
Push-In T-Fitting Qsmtl-M5-6 360? Orientable, Male Thread With External Hexagon. Size=Mini, Nominal Size=1,7 Mm, Type Of Seal On Screw-In Stud=Sealing Ring, Assembly Position=Any, Container Size=10
Push-In T-Fitting QST-G1/2-16
Push-In T-Fitting QSTF-G1/4-6
Push-In T-Fitting Qstl-1/4-6 360? Orientable, Male Thread With External Hexagon. Size=Standard, Nominal Size=4,3 Mm, Type Of Seal On Screw-In Stud=Coating, Assembly Position=Any, Container Size=10
Push-In Y-Connector NPQM-Y-Q12-E-P10
Quick Connector ACK-3/8-PK-6
R380-3HGPW
R380-6M30
R56MB-2L8W
REG 1" MAX-90
REG 1",0-50,GAGE
REG 1-1/2 BSPP,GAUGE
REG 1-1/2,PANEL NUT,BSPP
REG 1-1/4 BSPP,0-150,NUT
REG 1-1/4,NON-REL,0-50
REG 1/2 NON-REL,MAX 7 PSI
REG 1/2, GAUGE,MTL NUT,RED
REG 1/2,0-20,MTL DOME,GAG
REG 1/2,KEY,15-100,G,NUT
REG 1/2,P-NUT
REG 1/2,R.FLOW,P-NUT,GAGE
REG 1/4 MAX-55
REG 1/4 MAX-90
REG 1/4,NON-REL,VITON,NUT
REG 3/4 INT.CHECK,TEE
REG 3/4 MAX-80,GAGE
REG 3/4,MAX-50
REG 3/4,NO KEY,0-50