CategoryIdL1: 8 (Page 1)

2-1/2" X 3/4 Bore 90 Degree APKT-160408 Indexable Face Mill

<ul><li>?HHIP 8 X 6 X 5 open end slotted angle plate has convenient clamping slots for mounting.</li><li>?The plate is widely used for machining, layout and inspection</li><li>?It is made of high tensile cast iron properly seasoned against distortion and accurately machined to .002 per 6"</li><li>?The plate is square and parallel on all faces and Slot A is 90? to slot C</li><li>?1-2-3 precision matched pair block set is heat treated and case hardened to HRC 55 to 60</li><li>?They are also hardened and precision ground on all 6 sides of each block.</li><li>?The 1-2-3 blocks accuracy with squareness on all sides within .0002" per inch.</li><li>?There are 23 holes consisting of 5 tapped holes that are 3/8"-16 for clamping and 18 untapped holes.</li><li>?These blocks have a cross drilling design gives minimum weight and maximum strength.</li></ul>

Adapter

Adjustable handle ECO M5x15mm

Adjustable Handle, Handle Type Ball Knob, Handle Material Zinc, Components Material Stainless Steel, Color Black, Thread Size 5/16 In.-18, Thread Standard UNC, Screw Length 40.00mm, Overall Height 37.00mm, Overall Length 3-37/64 in, Thread Type External, Standards -, Mounting Type External Threads

Adjustable Handle, Handle Type Ball Knob, Handle Material Zinc, Components Material Steel, Color Black, Thread Size 1/2 In.-13, Thread Standard UNC, Screw Length 25.00mm, Overall Height 49.00mm, Overall Length 4.9600 in, Thread Type External, Standards RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Hard and Soft Touch, Handle Material Fiberglass, Components Material Stainless Steel, Color Black Gray, Thread Size #10-32, Thread Standard UNF, Screw Length 0.3500 in, Overall Height 1.1800 in, Overall Length 1-37/64 in, Thread Type Internal, Features Die Cast Zinc Toothed Ring, Standards REACH, RoHS, Mounting Type Internal Threads

Adjustable Handle, Handle Type Hard and Soft Touch, Handle Material Fiberglass, Components Material Steel, Color Black Gray, Thread Size M8, Thread Standard Coarse, Screw Length 50.00mm, Overall Height 2-1/32 in, Overall Length 3-5/32 in, Thread Type External, Standards REACH, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Straight, Handle Material Zinc, Components Material Steel, Color Black, Thread Size 3/8 In.-16, Thread Standard UNC, Screw Length 30.00mm, Overall Height 1.1500 in, Overall Length 2-9/16 in, Thread Type External, Standards REACH, RoHS, Mounting Type External Threads, Finish - Machining Powder Coated

Adjustable Handle, Handle Type Teardrop, Handle Material Plastic, Components Material Stainless Steel, Color Black Gray, Thread Size M6, Screw Length 60.00mm, Overall Height 28.50mm, Overall Length 2.9300 in, Thread Type External, Features Comfortable Grip, Standards -, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Stainless Steel, Components Material Stainless Steel, Color Natural, Thread Size 5/16 In.-18, Thread Standard UNC, Screw Length 35/64 in, Overall Height 2.1500 in, Overall Length 3.1500 in, Thread Type Internal, Standards REACH, RoHS, Mounting Type Internal Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Stainless Steel, Components Material Stainless Steel, Color Natural, Thread Size M8, Thread Standard Coarse, Screw Length 30.00mm, Overall Height 1-43/64 in, Overall Length 2-9/16 in, Thread Type External, Standards REACH, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Thermoplastic, Components Material Steel, Color Green, Thread Size 3/8 In.-16, Thread Standard UNC, Screw Length 30.00mm, Overall Height 37.00mm, Overall Length 3-37/64 in, Thread Type External, Features Comfortable Grip, Standards Green RAL6032, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Thermoplastic, Components Material Steel, Color Green, Thread Size M10, Screw Length 45.00mm, Overall Height 28.50mm, Overall Length 2.9300 in, Thread Type External, Features Comfortable Grip, Standards Green RAL6032, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Thermoplastic, Components Material Steel, Color Green, Thread Size M6, Screw Length 40.00mm, Overall Height 24.50mm, Overall Length 1.8500 in, Thread Type External, Features Comfortable Grip, Standards Green RAL6032, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Thermoplastic, Components Material Steel, Color Orange, Thread Size M5, Screw Length 35.00mm, Overall Height 24.50mm, Overall Length 1.8500 in, Thread Type External, Features Comfortable Grip, Standards Orange RAL2004, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Thermoplastic, Components Material Steel, Color Red, Thread Size 1/4 In.-20, Thread Standard UNC, Screw Length 50.00mm, Overall Height 28.50mm, Overall Length 2.9300 in, Thread Type External, Features Comfortable Grip, Standards Red RAL3020, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Zinc, Components Material Stainless Steel, Color Orange, Thread Size 1/4 In.-20, Thread Standard UNC, Screw Length 50.00mm, Overall Height 1-43/64 in, Overall Length 2-9/16 in, Thread Type External, Standards Orange RAL2004, REACH, RoHS, Mounting Type External Threads, Finish - Machining Powder Coated

Adjustable Handle, Handle Type Teardrop, Handle Material Zinc, Components Material Stainless Steel, Color Orange, Thread Size 3/8 In.-16, Thread Standard UNC, Screw Length 20.00mm, Overall Height 2.1500 in, Overall Length 3.1500 in, Thread Type External, Standards Orange RAL2004, REACH, RoHS, Mounting Type External Threads, Finish - Machining Powder Coated

Adjustable Handle, Handle Type Teardrop, Handle Material Zinc, Components Material Stainless Steel, Color Red, Thread Size 5/16 In.-18, Thread Standard UNC, Screw Length 25.00mm, Overall Height 1-43/64 in, Overall Length 2-9/16 in, Thread Type External, Standards REACH, Red RAL3003, RoHS, Mounting Type External Threads, Finish - Machining Powder Coated

Adjustable Handle, Handle Type Teardrop, Handle Material Zinc, Components Material Stainless Steel, Color Silver Metallic, Thread Size 1/4 In.-20, Thread Standard UNC, Screw Length 15.00mm, Overall Height 1-7/32 in, Overall Length 1-37/64 in, Thread Type External, Standards REACH, RoHS, Mounting Type External Threads, Finish - Machining Powder Coated

Adjustable Handle, Handle Type Teardrop, Handle Material Zinc, Components Material Stainless Steel, Color Silver, Thread Size M12, Thread Standard Coarse, Screw Length 43/64 in, Overall Height 2-31/64 in, Overall Length 3.7400 in, Thread Type Internal, Standards REACH, RoHS, Mounting Type Internal Threads

Adjustable Handle, Modern Design, Sz. 2, M06X30, Die Cast Zinc Orange RAL 2004, Comp: Steel

Adjustable Handle, Size: 1 M04 Zinc, Black Satin, Comp: Stainless Steel

Adjustable Handle, Size: 2 M08X55 Zinc, Silver Metallic, Comp: Steel

Adjustable Handle, Soft Touch, Size: 1 M05X30 Plastic, Black RAL 7021, Comp: Steel

Adjustable Handle, Soft Touch, Size: 1 M06, Plastic Black RAL 7021, Comp: Stainless Steel

Adjustable Handle, T-Handle Design, Cast Zinc, 1/2"-13 x 1.25" Stainless Steel External Thread, 3.62" Handle Diameter, Safety Orange

Adjustable Handle, T-Handle Design, Cast Zinc, 3/8"-16 x 1.57" Steel External Thread, 3.07" Handle Diameter, Safety Orange

Adjustable Handle, T-Handle Design, Plastic Handle, 3/8"-16 x 1.97" Stainless Steel External Thread, 3.07" Handle Diameter

Adjustable Handle, T-Handle Design, Safety Orange Plastic Handle, #10-32 x 1.25" Steel External Thread, 1.98" Handle Diameter

Adjustable Tension Levers low profile, external thread, 15, metric

Assembly Parts and Accessories AP351-SN2509

Balance Index Rings, Compatible Taper All Taper, Compatible with Product Type For Fine Balancing of All Tool Holders, For Use With 32mm Shank Diameter, Includes (2) Balancing Rings, Clamping Screw, Overall Length 42.00mm, Shank Dia. 32.00mm, Features Balances Quickly and Precisely, No Damage to the Tool Holder, Simply Fixed by Clamping Screw, The Balancing Machine Determines the Position of the Rings

Balance Index Rings, Compatible Taper All Taper, Compatible with Product Type For Fine Balancing of All Tool Holders, For Use With 56mm Shank Diameter, Includes (2) Balancing Rings, Clamping Screw, Overall Length 66.00mm, Shank Dia. 56.00mm, Features Balances Quickly and Precisely, No Damage to the Tool Holder, Simply Fixed by Clamping Screw, The Balancing Machine Determines the Position of the Rings

Balance Index Rings, Compatible Taper All Taper, Compatible with Product Type For Fine Balancing of All Tool Holders, For Use With 66mm Shank Diameter, Includes (2) Balancing Rings, Clamping Screw, Overall Length 76.00mm, Shank Dia. 66.00mm, Features Balances Quickly and Precisely, No Damage to the Tool Holder, Simply Fixed by Clamping Screw, The Balancing Machine Determines the Position of the Rings

Balance Index Rings,For 25mm Dia. Shank

Balance Index Rings,For 28mm Dia. Shank

Balance Index Rings,For 94mm Dia. Shank

Ball Grips, external thread, inch

Ball Grips, internal thread, inch

Ball Knob, 1/4-20 Thread Size, 1.25"L, Steel

Ball Knobs, stainless steel or aluminum, DIN 319, Style K, metric

Big Hand tubular handle

Cam Handle, External Threads, Adjustable Cam Lever, Plastic, Stainless Steel, Thread Size 1/4 In.-20, Overall Length 79.60mm

Cam Handle, External Threads, Cam Lever, Cast Aluminum, Thread Size #6-32, Overall Length 41.70mm

Clamp

Clamp,LATHE KM40 RND Shank D40X250.0mm

Collet Chuck, Min. Collet Capacity 0.0200 in, Projection 1.6500 in, ER11

Collet Chuck, Min. Collet Capacity 0.0200 in, Projection 2 in, ER16

Collet Chuck, Projection 80.00 mm

Collet Chuck, Projection 90.00 mm

Collet, Round, Overall Length 2 in

DIN 6335 aluminum hand knobs are perfect for medium to heavy duty clamping applications. Highly resistant to weathering and, also have good corrosion resistance properties.

DIN 6335 phenolic plastic hand knobs feature a tapped brass insert.

DIN6335-KU-25-M5-K-MS Star Knob

End Mill Holder and Adapter

End Mill Holder Blank, Features 25CrMoV4 Chromium-Molybdenum Steel;Hardened Taper and Flange;Shank with Center Unhardened for Further Machining;Taper and Contact Face Ground, For Use With For Own Manufacturing of Special Tools, Material - Machining High Speed Steel

End Mill Holder Blank,KM50TS

End Mill Holder, Projection 0.9100 in, Measurement System Metric

End Mill Holder, Taper Size BT40, Bore Dia. 7/16 in, Projection 2-1/2 in, Nose Dia. 1.1000 in, Measurement System Fractional Inch, End Type Single End

End Mill Holder, Taper Size CAT50, Bore Dia. 3/8 in, Projection 6 in, Nose Dia. 1 in, Measurement System Fractional Inch, End Type Single End

End Mill Holder, Taper Size CV50, Bore Dia. 3/8 in, Projection 2-1/2 in, Nose Dia. 1 in, Measurement System Fractional Inch, End Type Single End

End Mill Holder,Taper,KM63TS

Fluted Knob with Screw, 3/8-16 Thread Size, 1.50"L, Steel

GN 5336 star knobs are forged; therefore, a close grain structure is maintained providing a high tensile strength and a smooth surface.

GN 5337.3 safety five-lobed knobs are best suited for applications where any unintended loosening of the knob may lead to accidents. The five lobe design is visually appealing and also gives the operator the means to achieve higher torque. Resistant to solvents, oils, grease and other chemical agents.

GN 6335.5 technopolymer plastic hand knob features a stainless steel threaded stud for a use in a range of clamping applications.

GN 6336.5 technopolymer knobs with stainless steel threaded stud extend the range of clamping applications.

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

GN5336-40-M8-E-MT Hand Knob

GN5336-70-M16-E-PL Hand Knob

GN6335.5-ST-40-M8-30 Star Knob-Plastic

GN6336.5-ST-25-M5-10 Star Knob

Grip Rod D1=1/2-13, L=80, D=14, Form: C Taper Grip, Steel Black Oxidized, Components: Thermoset Components: Black High-Gloss. Note: all KIPP measurements are expressed in millimeters (mm) except for threads and bores on inch products, which are expressed in inches.

Grub Screw, Hexagon Socket W. Point DIN En Iso4027 D1=M06X40, Steel Black

Hand Knob, Handle Type 3 Point, Handle Material Polypropylene, Mounting Type Hex Hole for Bolts/Cap Screws/Nuts, Thread Size M6, Handle Dia. 1-3/4 in, Base Dia. 3/4 in, Overall Height 1-1/16 in, Inside Dia. 6.00mm, Tap Type Through Hole, Includes -, Standards -, Color Black, Features Fixtures and Unusual Length Fasteners, Jigs, MRO, Prototypes, Finish -

Hand Knob, Handle Type 3 Point, Handle Material Polypropylene, Steel, Mounting Type Threaded Insert, Thread Size 3/8 In.-16, Handle Dia. 1-3/4 in, Base Dia. 3/4 in, Overall Height 1-3/64 in, Tap Type Through Hole, Includes -, Standards -, Color Black, Features Able to Grasp and Turn, Finish Zinc Plated Component

Hand Knob, Handle Type 3 Point, Handle Material Polypropylene, Steel, Mounting Type Threaded Insert, Thread Size 5/16 In.-18, Handle Dia. 1-3/4 in, Base Dia. 3/4 in, Overall Height 1-3/64 in, Tap Type Through Hole, Includes -, Standards -, Color Black, Features Able to Grasp and Turn, Finish Zinc Plated Component

Hand Knob, Handle Type Ball, Handle Material Polypropylene, Steel, Mounting Type Locknut, Thread Size 5/8 In.-11, Handle Dia. 1-5/8 in, Base Dia. 3/4 in, Overall Height 1-1/2 in, Tap Type Blind Hole, Includes -, Standards -, Color Black, Features No-Slip Grip, Finish Satin, Zinc Plated Component

Hand Knob, Handle Type Fluted, Handle Material Polypropylene, Steel, Mounting Type Threaded Insert, Thread Size 5/16 In.-18, Handle Dia. 2-1/2 in, Base Dia. 1-1/4 in, Overall Height 1-1/4 in, Tap Type Blind Hole, Includes -, Standards -, Color Black, Features Soft Touch Material, Finish Zinc Plated Component

Hand Knob, Handle Type Knurled Round, Handle Material Plastic, Mounting Type Internal Threads, Thread Size #8-32, Handle Dia. 3/4 in, Base Dia. 1/2 in, Overall Height 31/64 in, Screw Length 0.50 in, Tap Type Blind Hole

Hand Knob, Handle Type Star, Handle Material Polypropylene, Steel, Mounting Type External Thread, Thread Size 1/4 In.-20, Handle Dia. 1-3/4 in, Base Dia. 7/8 in, Overall Height 1-1/4 in, Screw Length 1 in, Includes -, Standards -, Color Black, Features Comfortable and Secure Grip, For High-Torque Applications, Finish Zinc Plated Component

Handwheel, DIN 950, Aluminum 3-spoke, Diameter D= 315 mm, Bore D2= 1", Without Grip