CategoryIdL2: 6094

Products with this attribute (107 total)

Adjustable Handle, Handle Type Ball Knob, Handle Material Zinc, Components Material Stainless Steel, Color Black, Thread Size 5/16 In.-18, Thread Standard UNC, Screw Length 40.00mm, Overall Height 37.00mm, Overall Length 3-37/64 in, Thread Type External, Standards -, Mounting Type External Threads

Adjustable Handle, Handle Type Ball Knob, Handle Material Zinc, Components Material Steel, Color Black, Thread Size 1/2 In.-13, Thread Standard UNC, Screw Length 25.00mm, Overall Height 49.00mm, Overall Length 4.9600 in, Thread Type External, Standards RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Hard and Soft Touch, Handle Material Fiberglass, Components Material Stainless Steel, Color Black Gray, Thread Size #10-32, Thread Standard UNF, Screw Length 0.3500 in, Overall Height 1.1800 in, Overall Length 1-37/64 in, Thread Type Internal, Features Die Cast Zinc Toothed Ring, Standards REACH, RoHS, Mounting Type Internal Threads

Adjustable Handle, Handle Type Hard and Soft Touch, Handle Material Fiberglass, Components Material Steel, Color Black Gray, Thread Size M8, Thread Standard Coarse, Screw Length 50.00mm, Overall Height 2-1/32 in, Overall Length 3-5/32 in, Thread Type External, Standards REACH, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Straight, Handle Material Zinc, Components Material Steel, Color Black, Thread Size 3/8 In.-16, Thread Standard UNC, Screw Length 30.00mm, Overall Height 1.1500 in, Overall Length 2-9/16 in, Thread Type External, Standards REACH, RoHS, Mounting Type External Threads, Finish - Machining Powder Coated

Adjustable Handle, Handle Type Teardrop, Handle Material Plastic, Components Material Stainless Steel, Color Black Gray, Thread Size M6, Screw Length 60.00mm, Overall Height 28.50mm, Overall Length 2.9300 in, Thread Type External, Features Comfortable Grip, Standards -, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Stainless Steel, Components Material Stainless Steel, Color Natural, Thread Size 5/16 In.-18, Thread Standard UNC, Screw Length 35/64 in, Overall Height 2.1500 in, Overall Length 3.1500 in, Thread Type Internal, Standards REACH, RoHS, Mounting Type Internal Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Stainless Steel, Components Material Stainless Steel, Color Natural, Thread Size M8, Thread Standard Coarse, Screw Length 30.00mm, Overall Height 1-43/64 in, Overall Length 2-9/16 in, Thread Type External, Standards REACH, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Thermoplastic, Components Material Steel, Color Green, Thread Size 3/8 In.-16, Thread Standard UNC, Screw Length 30.00mm, Overall Height 37.00mm, Overall Length 3-37/64 in, Thread Type External, Features Comfortable Grip, Standards Green RAL6032, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Thermoplastic, Components Material Steel, Color Green, Thread Size M10, Screw Length 45.00mm, Overall Height 28.50mm, Overall Length 2.9300 in, Thread Type External, Features Comfortable Grip, Standards Green RAL6032, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Thermoplastic, Components Material Steel, Color Green, Thread Size M6, Screw Length 40.00mm, Overall Height 24.50mm, Overall Length 1.8500 in, Thread Type External, Features Comfortable Grip, Standards Green RAL6032, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Thermoplastic, Components Material Steel, Color Orange, Thread Size M5, Screw Length 35.00mm, Overall Height 24.50mm, Overall Length 1.8500 in, Thread Type External, Features Comfortable Grip, Standards Orange RAL2004, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Thermoplastic, Components Material Steel, Color Red, Thread Size 1/4 In.-20, Thread Standard UNC, Screw Length 50.00mm, Overall Height 28.50mm, Overall Length 2.9300 in, Thread Type External, Features Comfortable Grip, Standards Red RAL3020, RoHS, Mounting Type External Threads

Adjustable Handle, Handle Type Teardrop, Handle Material Zinc, Components Material Stainless Steel, Color Orange, Thread Size 1/4 In.-20, Thread Standard UNC, Screw Length 50.00mm, Overall Height 1-43/64 in, Overall Length 2-9/16 in, Thread Type External, Standards Orange RAL2004, REACH, RoHS, Mounting Type External Threads, Finish - Machining Powder Coated

Adjustable Handle, Handle Type Teardrop, Handle Material Zinc, Components Material Stainless Steel, Color Orange, Thread Size 3/8 In.-16, Thread Standard UNC, Screw Length 20.00mm, Overall Height 2.1500 in, Overall Length 3.1500 in, Thread Type External, Standards Orange RAL2004, REACH, RoHS, Mounting Type External Threads, Finish - Machining Powder Coated

Adjustable Handle, Handle Type Teardrop, Handle Material Zinc, Components Material Stainless Steel, Color Red, Thread Size 5/16 In.-18, Thread Standard UNC, Screw Length 25.00mm, Overall Height 1-43/64 in, Overall Length 2-9/16 in, Thread Type External, Standards REACH, Red RAL3003, RoHS, Mounting Type External Threads, Finish - Machining Powder Coated

Adjustable Handle, Handle Type Teardrop, Handle Material Zinc, Components Material Stainless Steel, Color Silver Metallic, Thread Size 1/4 In.-20, Thread Standard UNC, Screw Length 15.00mm, Overall Height 1-7/32 in, Overall Length 1-37/64 in, Thread Type External, Standards REACH, RoHS, Mounting Type External Threads, Finish - Machining Powder Coated

Adjustable Handle, Handle Type Teardrop, Handle Material Zinc, Components Material Stainless Steel, Color Silver, Thread Size M12, Thread Standard Coarse, Screw Length 43/64 in, Overall Height 2-31/64 in, Overall Length 3.7400 in, Thread Type Internal, Standards REACH, RoHS, Mounting Type Internal Threads

Adjustable Handle, Modern Design, Sz. 2, M06X30, Die Cast Zinc Orange RAL 2004, Comp: Steel

Adjustable Handle, Soft Touch, Size: 1 M06, Plastic Black RAL 7021, Comp: Stainless Steel

Adjustable Handle, T-Handle Design, Safety Orange Plastic Handle, #10-32 x 1.25" Steel External Thread, 1.98" Handle Diameter

Ball Grips, external thread, inch

Ball Grips, internal thread, inch

Ball Knob, 1/4-20 Thread Size, 1.25"L, Steel

Big Hand tubular handle

Cam Handle, External Threads, Adjustable Cam Lever, Plastic, Stainless Steel, Thread Size 1/4 In.-20, Overall Length 79.60mm

Cam Handle, External Threads, Cam Lever, Cast Aluminum, Thread Size #6-32, Overall Length 41.70mm

DIN 6335 aluminum hand knobs are perfect for medium to heavy duty clamping applications. Highly resistant to weathering and, also have good corrosion resistance properties.

DIN 6335 phenolic plastic hand knobs feature a tapped brass insert.

DIN6335-KU-25-M5-K-MS Star Knob

Fluted Knob with Screw, 3/8-16 Thread Size, 1.50"L, Steel

GN 5336 star knobs are forged; therefore, a close grain structure is maintained providing a high tensile strength and a smooth surface.

GN 5337.3 safety five-lobed knobs are best suited for applications where any unintended loosening of the knob may lead to accidents. The five lobe design is visually appealing and also gives the operator the means to achieve higher torque. Resistant to solvents, oils, grease and other chemical agents.

GN 6335.5 technopolymer plastic hand knob features a stainless steel threaded stud for a use in a range of clamping applications.

GN 6336.5 technopolymer knobs with stainless steel threaded stud extend the range of clamping applications.

GN5336-70-M16-E-PL Hand Knob

GN6335.5-ST-40-M8-30 Star Knob-Plastic

GN6336.5-ST-25-M5-10 Star Knob

Grip Rod D1=1/2-13, L=80, D=14, Form: C Taper Grip, Steel Black Oxidized, Components: Thermoset Components: Black High-Gloss. Note: all KIPP measurements are expressed in millimeters (mm) except for threads and bores on inch products, which are expressed in inches.

Grub Screw, Hexagon Socket W. Point DIN En Iso4027 D1=M06X40, Steel Black

Hand Knob, Handle Type 3 Point, Handle Material Polypropylene, Mounting Type Hex Hole for Bolts/Cap Screws/Nuts, Thread Size M6, Handle Dia. 1-3/4 in, Base Dia. 3/4 in, Overall Height 1-1/16 in, Inside Dia. 6.00mm, Tap Type Through Hole, Includes -, Standards -, Color Black, Features Fixtures and Unusual Length Fasteners, Jigs, MRO, Prototypes, Finish -

Hand Knob, Handle Type 3 Point, Handle Material Polypropylene, Steel, Mounting Type Threaded Insert, Thread Size 3/8 In.-16, Handle Dia. 1-3/4 in, Base Dia. 3/4 in, Overall Height 1-3/64 in, Tap Type Through Hole, Includes -, Standards -, Color Black, Features Able to Grasp and Turn, Finish Zinc Plated Component

Hand Knob, Handle Type 3 Point, Handle Material Polypropylene, Steel, Mounting Type Threaded Insert, Thread Size 5/16 In.-18, Handle Dia. 1-3/4 in, Base Dia. 3/4 in, Overall Height 1-3/64 in, Tap Type Through Hole, Includes -, Standards -, Color Black, Features Able to Grasp and Turn, Finish Zinc Plated Component

Hand Knob, Handle Type Ball, Handle Material Polypropylene, Steel, Mounting Type Locknut, Thread Size 5/8 In.-11, Handle Dia. 1-5/8 in, Base Dia. 3/4 in, Overall Height 1-1/2 in, Tap Type Blind Hole, Includes -, Standards -, Color Black, Features No-Slip Grip, Finish Satin, Zinc Plated Component

Hand Knob, Handle Type Fluted, Handle Material Polypropylene, Steel, Mounting Type Threaded Insert, Thread Size 5/16 In.-18, Handle Dia. 2-1/2 in, Base Dia. 1-1/4 in, Overall Height 1-1/4 in, Tap Type Blind Hole, Includes -, Standards -, Color Black, Features Soft Touch Material, Finish Zinc Plated Component

Hand Knob, Handle Type Knurled Round, Handle Material Plastic, Mounting Type Internal Threads, Thread Size #8-32, Handle Dia. 3/4 in, Base Dia. 1/2 in, Overall Height 31/64 in, Screw Length 0.50 in, Tap Type Blind Hole

Hand Knob, Handle Type Star, Handle Material Polypropylene, Steel, Mounting Type External Thread, Thread Size 1/4 In.-20, Handle Dia. 1-3/4 in, Base Dia. 7/8 in, Overall Height 1-1/4 in, Screw Length 1 in, Includes -, Standards -, Color Black, Features Comfortable and Secure Grip, For High-Torque Applications, Finish Zinc Plated Component

Handwheel, DIN 950, Aluminum 3-spoke, Diameter D= 315 mm, Bore D2= 1", Without Grip

Handwheel, DIN 950, D1= 500 mm, Bore D2= 34 mm, Gray Cast Iron, Machine Handle Revolving, Steel

Handwheel,Alum 3Spke,OD 80mm,Bre 10mm,Re

Handwheel,disc duroplast,OD 160mm,Bre 0.

Handwheel,gray cast iron 3Spke,OD 400mm

JW Winco GN125 6T32A32/E Adjustable Lever

JW Winco GN125.5 8T40BAM/E Adjustable Lever

JW Winco GN323.4 14KE65/AZI Safety Clutch Handwheel

Knurled Knob Size: 1 D=M05X25 D1=21 H=22 Thermoplastic Black RAL 7021, Components: Steel, Cap: Yellow RAL 1021. Note: all KIPP measurements are expressed in millimeters (mm) except for threads and bores on inch products, which are expressed in inches.

Knurled Knob Size: 3 D=3/8-16X40 D1=34 H=36 Thermoplastic Black RAL 7021, Components: Steel, Cap: Red RAL 3020. Note: all KIPP measurements are expressed in millimeters (mm) except for threads and bores on inch products, which are expressed in inches.

Knurled Knob, Thread Size M10

Knurled Wheels components in steel, external thread, Style L, metric

Lobe Knob, Load Rated (Y/N) N, Mounting Type Threaded Holes, Material Glass-Fibre, Finish Matte, Projection 1 7/32 in, Grip Dia. 1 31/32 in, Grip Thickness 35/64 in, Screw Size 10, Overall Width 1 31/32 in, Thread Depth 43/64 in, Color White, Degree Offset 0 Degrees , Grip Height 1 7/32 in, Hardware Not Included, Product Type Lobe Knob

Long Tapered Knob, 5/16-18 Thread Size, 3.875"L, Steel

Revolving Handle, Oval, Size: 2, D= M08X10, D1= 41, Thermoset, Gloss Black, Comp. Stainless Steel

Shift Knob, 5/16-18 Thread Size, 2"L, Steel

Snap Lock Four Knob, M6 Thread Size, 1-3/4" Dia.

Spherical Knob Size: 1, D1=25 D=M06X20, Thermoplastic Black RAL 7021, Components: Stainless Steel, Cap: Gray RAL 7035. Note: all KIPP measurements are expressed in millimeters (mm) except for threads and bores on inch products, which are expressed in inches.

Spherical Knob Size: 1, D1=25 D=M06X25, Thermoplastic Black RAL 7021, Components: Steel, Cap: Black RAL 7021. Note: all KIPP measurements are expressed in millimeters (mm) except for threads and bores on inch products, which are expressed in inches.

Star Grip To DIN 6336 D1=80 H=50, Form: B, Drilled Through, Aluminum, D=16. Note: all KIPP measurements are expressed in millimeters (mm) except for threads and bores on inch products, which are expressed in inches.

Star Grip w Lanyrd M12x25mm 50mm OD,Red

Star Grip w Lanyrd M12x45mm 50mm OD,Gray

Star Grip w Lanyrd M16x60mm 63mm OD,Gray

Star Grip w/Lanyard M12x35mm 50mm OD,Bk

Star Grip, DIN 6336 Similar, D=0,375, D1= 63, Drilled Bushing, Steel, Black Plastic, Cap Black

Star Grip,10 mm bore,63 mm OD,Yellow

Star Grip,3/8-16 x 20 mm,40 mm OD,Gray

Star Grip,5/16-18 thru hole,40 mm OD

STAR KNOB STAINLESS

Star Knob, 1/4-20 Thread Size, 1.125"L, Blind Tap, Steel

Tension Lever Size: 4 3/4-10X90, A=128,5, Form: 20? Stainless Steel, Components: Plastic. Note: all KIPP measurements are expressed in millimeters (mm) except for threads and bores on inch products, which are expressed in inches.

This new handle series was designed to work in tight space applications. It?s flat T-Handle design has a reduced angle which decreases the overall height of the handle. A shorter handle radius also helps to limit the horizontal space required to clamp in tight spaces. The contoured handle offers an extremely comfortable grip and allows uniform clamping pressure to be applied fully around the thread.

Tubular Handle Bighand, A=180, L=213,4 Aluminum Black Anodized, Comp: Plastic Comp:Black Ral7021,

Tubular Handle Bighand, A=300, L=350, D=M10X45 Aluminum Blue RAL 5020, Components: Thermoplastic Components: Black RAL 7021. Note: all KIPP measurements are expressed in millimeters (mm) except for threads and bores on inch products, which are expressed in inches.

Tubular Handle Bighand, A=500, L=550, D=M05X50 Aluminum Black RAL 7021, Components: Thermoplastic Components: Black RAL 7021. Note: all KIPP measurements are expressed in millimeters (mm) except for threads and bores on inch products, which are expressed in inches.