CategoryIdL3: 16016

Products with this attribute (41 total)

Ball End Mill, 5 mm Milling Dia., Carbide, Non-Coolant Through

Chamfer End Mill

Cobalt Angle Mill,82/90 deg.,1/2 In.

Corner Chamfer End Mill, 1 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0197 in, 2 1/4 in

Corner Chamfer End Mill, 10.00 mm Milling Dia., Carbide, Straight, Metric, 0.20 mm, 14.00 mm

Corner Chamfer End Mill, 12.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 26.00 mm

Corner Chamfer End Mill, 12.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Chamfer End Mill, 12.00 mm Milling Dia., Carbide, Weldon Flat, Metric, 0.30 mm, 75.00 mm

Corner Chamfer End Mill, 14.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 14.00 mm

Corner Chamfer End Mill, 14.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 90 Degrees , 0.30 mm, 32.00 mm

Corner Chamfer End Mill, 20.00 mm Milling Dia., Carbide, Straight, Metric, 0.50 mm, 38.00 mm

Corner Chamfer End Mill, 25.00 mm Milling Dia., Cobalt, Non-Coolant Through, Weldon Flat, Metric, 0.0200 in, 45.00 mm

Corner Chamfer End Mill, 3/4 in Milling Dia., Cobalt, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0140 in, 1 5/8 in

Corner Chamfer End Mill, 3/4 in Milling Dia., Cobalt, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0140 in, 3 in

Corner Chamfer End Mill, 4.00 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 11.00 mm

Corner Chamfer End Mill, 4.00 mm Milling Dia., Carbide, Straight, Metric, 90 Degrees , 0.10 mm, 11.00 mm

Corner Chamfer End Mill, 4.50 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 14.00 mm

Corner Chamfer End Mill, 5/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0200 in, 3/4 in

Corner Chamfer End Mill, 7.00 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 20.00 mm

Corner Chamfer End Mill, 7.00 mm Milling Dia., Carbide, Weldon Flat, Metric, 0.40 mm, 16.00 mm

Corner Chamfer End Mill, 7/16 in Milling Dia., Cobalt, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0100 in, 1 1/4 in

Corner Chamfer End Mill, 8.00 mm Milling Dia., Carbide, Straight, Metric, 0.40 mm, 16.00 mm

Corner Chamfer End Mill, 9.00 mm Milling Dia., Carbide, Straight, Metric, 0.20 mm, 16.00 mm

Corner Radius End Mill, 12.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 2.00mm, 18.00 mm, 125.00 mm

Corner Radius End Mill, 5.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 0.25mm, 7.50 mm, 76.00 mm

Corner Radius End Mill, 8.00 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat, Metric, 0.45mm, 16.00 mm, 63.00 mm

Drill Mill, Carbide, AlTiN, 12.000 mm Milling Dia., 120 Degrees

Drill Mill, Carbide, Bright (Uncoated), 10.000 mm Milling Dia., 90 Degrees

Drill Mill, Carbide, Bright (Uncoated), 5/16 in Milling Dia., 90 Degrees

Drill Mill, Carbide, Bright (Uncoated), 6.000 mm Milling Dia., 90 Degrees

End Mill,0.1563 in. Milling Dia.,I4C

End Mill,18.00mm Milling Dia.,4777

End Mill,TiCN,0.5000 in Milling Dia,6208

Single End, Chamfer Mill, 45 Degrees Included Angle, 3/16 in Milling Dia., AlTiN, Fractional Inch

Square End Mill, 2.00 mm Milling Dia., TiAlN, Straight, Length of Cut 5.00 mm, Overall Length 50.00 mm, Shank Dia. 4.00 mm

Square End Mill, 20.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 38.00 mm, Overall Length 104.00 mm, Shank Dia. 20.00 mm

Square End Mill, 8.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 16.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm

Square Milling Head,DL20,Carbide