CategoryL1: Drives & Soft Starters
Products with this attribute (47 total)
180TDS84C - AutomationDirect EMI input filter, 230 VAC, 3-phase, 180A, panel mount, EMI/RFI filtering, drive rated, standard performance, studs. For use...
50TDS4W4C - AutomationDirect EMI input filter, 230/460 VAC, 3-phase, 50A, panel mount, EMI/RFI filtering, drive rated, standard performance, studs and ring...
ACNND-4025 - IronHorse ACN series AC general purpose drive, NEMA 4X, 460 VAC, 25hp with 3-phase input, 10hp with 1-phase input, SVC, V/Hz or torque mode, 5...
ACNND-47P5 - IronHorse ACN series AC general purpose drive, NEMA 4X, 460 VAC, 7-1/2hp with 3-phase input, 3hp with 1-phase input, SVC, V/Hz or torque mode,...
CFW100-CRS485 - WEG Electric CFW100 series communication module, Modbus RTU, 1 port, (1) RS-485 (5-pin terminal) and (1) miniB-USB port(s). For use with...
CFW100-IOADR - WEG Electric CFW100 series temperature combo module with infrared remote control, thermistor, 1-channel input, 3-point output, 240 VAC, (3)...
CFW100-IOAR - WEG Electric CFW100 series relay/analog combo module, Analog Input: 1-channel, current/voltage, Discrete Output: 1-point, relay, (1) Form A...
CFW100-KFABC-S2 - WEG Electric EMI input filter, 1-phase, 9.2A, 35mm DIN rail mount, EMI/RFI filtering. For use with WEG CFW100Xxxxxxx2 1-phase AC drives.
CFW300-CRS485 - WEG Electric CFW300 series communication module, Modbus RTU, 2 ports, (1) RS-485 (5-pin terminal) and (1) miniB-USB port(s). For use with...
CFW300-IOAR - WEG Electric CFW300 series relay/analog combo module, Analog Input: 1-channel, current/voltage, Analog Output: 1-channel, current/voltage,...
EMF11AM21A - AutomationDirect EMI input filter, 240 VAC, 1-phase, 11A, panel mount, EMI/RFI filtering, drive rated, standard performance, screw terminals...
GS-2010-FUSE - AutomationDirect spare fuse, 125A, 300 VAC, 200kA SCCR. Package of 5. For use with GS-2010-FKIT AC drive fuse kit.
GS-20P5-FKIT-1P - AutomationDirect fuse kit, 1/2hp, 230 VAC, 1-phase, input side only, 200kA SCCR. For use with GS1/GS2-20P5 AC drive.
GS-20P5-FUSE-3P - AutomationDirect spare fuse, 10A, 300 VAC, 200kA SCCR. Package of 5. For use with GS-20P5-FKIT-3P AC drive fuse kit.
GS-23P0-FKIT-3P - AutomationDirect fuse kit, 3hp, 230 VAC, 3-phase, input side only, 200kA SCCR. For use with GS2/GS3-23P0 AC drives.
GS-4010-FUSE - AutomationDirect spare fuse, 70A, 600 VAC, 200kA SCCR. Package of 5. For use with GS-4010-FKIT AC drive fuse kit.
GS-4015-FUSE - AutomationDirect spare fuse, 90A, 600 VAC, 200kA SCCR. Package of 5. For use with GS-4015-FKIT AC drive fuse kit.
GS-4030-FKIT - AutomationDirect fuse kit, 30hp, 460 VAC, 3-phase, input side only, 200kA SCCR. For use with GS3-4030 AC drive.
GS-4100-FKIT - AutomationDirect fuse kit, 100hp, 460 VAC, 3-phase, input side only, 200kA SCCR. For use with GS3-4100 AC drive.
GS-47P5-FKIT - AutomationDirect fuse kit, 7-1/2hp and 10hp, 460/575 VAC, 3-phase, input side only, 200kA SCCR. For use with GS2/GS3-47P5, GS2-57P5,...
GS-BR-1K0W5P1 - AutomationDirect braking resistor, 1000W, 5.1 ohm, encapsulated. For use with multiple AC drives.
GS-BR-1K2W3P9 - AutomationDirect braking resistor, 1200W, 3.9 ohm, encapsulated. For use with multiple AC drives. Requires GS-2DBU external braking unit.
GS-BR-1K5W013 - AutomationDirect braking resistor, 1500W, 13 ohm, encapsulated. For use with multiple AC drives.
GS-BR-1K5W043 - AutomationDirect braking resistor, 1500W, 43 ohm, encapsulated. For use with multiple AC drives.
GS-BR-200W360 - AutomationDirect braking resistor, 200W, 360 ohm, encapsulated. For use with multiple AC drives.
GS-RS485-8 - DURApulse GS series communication board, Modbus RTU, 8 ports, (9) RS-485 (RJ12) with (1) inbound port(s). For use with all GS drives.
GS10A-N1A1 - DURApulse GS10 series conduit box, NEMA 1. For use with GS10 series A1 and A2 frame AC drives. Mounting hardware included.
GS10A-N1A3 - DURApulse GS10 series conduit box, NEMA 1. For use with GS10 series A3 - A6 frame AC drives. Mounting hardware included.
GS13N-47P5 - DURApulse GS10 series AC micro drive, enclosed, 460 VAC, 7-1/2hp with 3-phase input, SVC or V/Hz mode, D1 frame, RS-485, Modbus, 100kA SCCR.
GS20XA-DSA - DURApulse GS20X series enclosed disconnect switch, NEMA 4X. For use with GS20X series A frame AC drives.
GS20XA-EPA - DURApulse GS20X series EMC shield plate, for use with GS20X series A frame AC drives. Allows motor lead shields to be grounded at the drive.
GS23-22P0 - DURApulse GS20 series AC general purpose drive, enclosed, 230 VAC, 2hp with 3-phase input, 1hp with 1-phase input, SVC, V/Hz, FOC or torque...
GS23-5010 - DURApulse GS20 series AC general purpose drive, enclosed, 575 VAC, 10hp with 3-phase input, SVC, V/Hz, FOC or torque mode, D frame, RS-485,...
GS23-51P0 - DURApulse GS20 series AC general purpose drive, enclosed, 575 VAC, 1hp with 3-phase input, SVC, V/Hz, FOC or torque mode, A5 frame, RS-485,...
GS23-52P0 - DURApulse GS20 series AC general purpose drive, enclosed, 575 VAC, 2hp with 3-phase input, SVC, V/Hz, FOC or torque mode, B1 frame, RS-485,...
GS23X-43P0 - DURApulse GS20X series AC general purpose drive, NEMA 4X, 460 VAC, 3hp with 3-phase input, SVC, V/Hz, FOC or torque mode, A frame, RS-485,...
GS4-CBX-G - DURApulse GS4 series conduit box, NEMA 1. For use with GS4 G frame drives. Mounting hardware included.
GS4-FAN-CB2 - DURApulse GS4 series board cooling fan, replacement, 40 x 40 x 28mm, 12 VDC. For use with 460V GS4 C frame drives. Electrical connector...
GS4-FMKIT-1 - DURApulse GS4 series flange mount kit, NEMA 1. For use with multiple GS4 A frame drives. Adapter plate and mounting hardware included.
GSD1-48-10N4X - IronHorse GSD1 series DC full-featured drive, 12-48 VDC, 1-phase, 1/50 to 1/8hp at 12 VDC and 1/12 to 1/2hp at 48 VDC, 10A, NEMA 4X, wall...
GSD4-24A-5C - IronHorse GSD4 series DC general purpose drive, 24/36 VAC, 1-phase, 1/50 to 1/6hp at 24-36 VDC, 5.5A, open frame, panel mount, field-install...
GSD8-240-10N4X - IronHorse GSD8 series DC digital drive, 120/240 VAC, 1-phase, 1hp at 90 VDC and 2hp at 180 VDC, 10A, NEMA 4X, wall mount, field-install...
GSD8-240-5C - IronHorse GSD8 series DC digital drive, 120/240 VAC, 1-phase, 1/2hp at 90 VDC and 1hp at 180 VDC, 5A, NEMA 4X, 1/8 DIN mount, field-install...
GSDA-PU2R - IronHorse encoder, 5-24 VDC, NPN open collector output, 1/10/20 ppr, 61mm diameter body, NEMA 3R, IP14, 6ft cable length, pigtail. For use with...
SR55-RJ45-RJ12 - Stellar SR55 series RJ45 female to RJ12 male adapter, for use with Stellar SR55 series soft starters.
VTF-246-HKL - AutomationDirect VTF series drive output filter, 208-600 VAC, 3hp at 208/230 VAC, 7-1/2hp at 460 VAC and 10hp at 575 VAC, 3-phase, 12A,...
VTF-246-KMN - AutomationDirect VTF series drive output filter, 208-600 VAC, 7-1/2hp at 208/230 VAC, 15hp at 460 VAC and 20hp at 575 VAC, 3-phase, 25A,...