Recessed Electric Wall-Mount Heater, Commercial/Industrial, 1125/3000 Watts, 3840/10.240 BtuH, Heater Voltage 208/240 V AC, Electric Heater Phase 1, Wall Opening Width 14-3/16 In., Color White, 5.4/12.5 Amps AC, Wall Opening Depth 4 In., Wall Opening Height 19-15/16 In., Mounting Type Surface and Recessed, 60 Hz, Air Temp. Rise 40 Degrees F, Grille Material 18 ga Steel, Grille Width 15 3/8 in, Grille Depth 1 in, Grille Height 20 1/8 in, Housing Width 13 7/8 in, Housing Depth 3 3/4 in
Roof Repair Tape, Material MicroSealing Technology, Product Type Roofing Tape, Overall Width 12 in, Color Gray, Dry Time 1 hr, UV Protected Material Yes, Compatible Surface Material All Materials Except Silicone, Includes Not Applicable, Thickness 25 mil, Series ETERNABOND RoofSeal, Overall Length 50 ft, Maximum Coverage Area 50 sq ft/gal
Sensors,5 Level Sensor Pcl/Pch 179528, Electrical Connection Type Hardwired, Display Type Not Applicable, Display Units Not Applicable, Display Resolution Not Applicable, Overall Length 4 in, Overall Height 4 in, Maximum Operating Temperature 406 Degrees F, Features Remote Sensors, which Thread into the Top of the Boiler or Tank, are Available with 1, 2, 3, 4 or 5 Probes of Varying Lengths that can Easily be cut to Desired Set Points, For Use With Boilers, Hydronic Systems, Tanks
Steam Trap, (F)NPT Connections 1/2 in, Max. Operating PSI 125 psi, End to End Length 3 7/8 in, Condensate Capacity Lbs/Hr 2,000 lb/hr, Max. Temp. 450 Degrees F, Type Inverted Bucket, Body Material Cast Iron, Pipe Configuration Horizontal, Trap Position Horizontal, Application Steam
Steam Trap, (F)NPT Connections 3/4 in, Max. Operating PSI 250 psi, End to End Length 7 7/8 in, Condensate Capacity Lbs/Hr 3,500 lb/hr, Max. Temp. 450 Degrees F, Type Inverted Bucket, Body Material Cast Iron, Pipe Configuration Horizontal, Trap Position Horizontal, Application Steam
Topog-E(R) Series 180 Black Rubber Handhole Gasket, 3-3/4 in x 5-1/2 in x 9/16 in, 1/4 in thick, Elliptical, Package of (2) gaskets. Maximum Pressure/Temperature Rating 180 PSI (12 bar) for Steam up to 380?F (193?C); 200 PSI (14 bar) for water, condensate, air, etc. up to 300?F (150?C). Excellent resistance to Steam, Hot & Cold Water. Good resistance to Alcohols, Ketones, Phosphate esters, Silicone oils and greases, Dilute acids, Bases, Salts, Glycols, Ammonia, Selected refrigerants, Animal and vegetable fats, Water treatment chemicals when used in accordance with supplier?s guidelines. NOT RECOMMENDED FOR USE WITH high concentrations of aromatic hydrocarbons, chlorinated solvents or petroleum-based oils, fuels and lubricants. Applications include Steam & Hot water boilers, Water softeners, Hot water heaters, Steam humidifiers and cookers, Water purifiers and demineralizers, Refrigeration units, Liquid treatment vessels, Carbon absorption and filtering vessels, Dryer cans in paper mills, Water hydrants, Mixing tanks, Compressed air tanks, Various types of dryers, Air starters and receivers, Deaerators, Hatch covers, Water towers and columns, PVC reactor vessels.
Topog-E(R) Series 180 Black Rubber Manway Gasket, 12-1/2 in x 16-1/4 in x 1-1/4 in, 1/4 in thick, Elliptical, Package of (2) gaskets. Maximum Pressure/Temperature Rating 180 PSI (12 bar) for Steam up to 380?F (193?C); 200 PSI (14 bar) for water, condensate, air, etc. up to 300?F (150?C). Excellent resistance to Steam, Hot & Cold Water. Good resistance to Alcohols, Ketones, Phosphate esters, Silicone oils and greases, Dilute acids, Bases, Salts, Glycols, Ammonia, Selected refrigerants, Animal and vegetable fats, Water treatment chemicals when used in accordance with supplier?s guidelines. NOT RECOMMENDED FOR USE WITH high concentrations of aromatic hydrocarbons, chlorinated solvents or petroleum-based oils, fuels and lubricants. Applications include Steam & Hot water boilers, Water softeners, Hot water heaters, Steam humidifiers and cookers, Water purifiers and demineralizers, Refrigeration units, Liquid treatment vessels, Carbon absorption and filtering vessels, Dryer cans in paper mills, Water hydrants, Mixing tanks, Compressed air tanks, Various types of dryers, Air starters and receivers, Deaerators, Hatch covers, Water towers and columns, PVC reactor vessels.