CategoryL1: Linear Motion

Products with this attribute (1426 total)

Thomson Linear MAM12ADJWWSS Linear Bearing, Ball Bushing only, MultiTrac, 12 mm, Closed, Not Self-aligning, Adjustable, Stainless Steel, Integral Wiper both ends; Use with 12 mm Diameter Shaft in end supported applications - MROSupply.com

Thomson Linear MAM16OPNWW Linear Bearing, Ball Bushing only, MultiTrac, 16 mm, Open, Not Self-aligning, Adjustable, Integral Wiper both ends; Use with 16 mm Diameter Shaft in continuously supported applications - MROSupply.com

Thomson Linear MAM20ADJWWSS Linear Bearing, Ball Bushing only, MultiTrac, 20 mm, Closed, Not Self-aligning, Adjustable, Stainless Steel, Integral Wiper both ends; Use with 20 mm Diameter Shaft in end supported applications - MROSupply.com

Thomson Linear MAM20OPNSS Linear Bearing, Ball Bushing only, MultiTrac, 20 mm, Open, Not Self-aligning, Adjustable, Stainless Steel; Use with 20 mm Diameter Shaft in continuously supported applications - MROSupply.com

Thomson Linear MAM20OPNW Linear Bearing, Ball Bushing only, MultiTrac, 20 mm, Open, Not Self-aligning, Adjustable, Integral Wiper one end; Use with 20 mm Diameter Shaft in continuously supported applications - MROSupply.com

Thomson Linear MAM25OPNWW Linear Bearing, Ball Bushing only, MultiTrac, 25 mm, Open, Not Self-aligning, Adjustable, Integral Wiper both ends; Use with 25 mm Diameter Shaft in continuously supported applications - MROSupply.com

Thomson Linear MAM30OPNSS Linear Bearing, Ball Bushing only, MultiTrac, 30 mm, Open, Not Self-aligning, Adjustable, Stainless Steel; Use with 30 mm Diameter Shaft in continuously supported applications - MROSupply.com

Thomson Linear MAM30OPNWWSS Linear Bearing, Ball Bushing only, MultiTrac, 30 mm, Open, Not Self-aligning, Adjustable, Stainless Steel, Integral Wiper both ends; Use with 30 mm Diameter Shaft in continuously supported applications - MROSupply.com

Thomson Linear MODKIT16-L4L Linear Bearing, Lube 4 Life Kit, Accessory, 1 in, Closed; Use with 1 in Nominal Diameter Closed Bushing Bearings - MROSupply.com

Thomson Linear MTS12-5008 Lead Nut Only, MTS Style, Flange Mount, 0.50 in X 1.500 in, Non-Preloaded, RH, Acetal, 125 lbf Design Load - MROSupply.com

Thomson Linear MTS2-16X2.5M Lead Nut Only, MTS Style, Flange Mount, 16 mm X 5 mm, Non-Preloaded, RH, Acetal, 175 lbf Design Load - MROSupply.com

Thomson Linear MTS2-20X4M Lead Nut Only, MTS Style, Flange Mount, 20 mm X 8 mm, Non-Preloaded, RH, Acetal, 275 lbf Design Load - MROSupply.com

Thomson Linear MTS2-5008 Lead Nut Only, MTS Style, Flange Mount, 0.500 in X 0.250 in, Non-Preloaded, RH, Acetal, 125 lbf Design Load - MROSupply.com

Thomson Linear MTS3-20X4M Lead Nut Only, MTS Style, Flange Mount, 20 mm X 12 mm, Non-Preloaded, RH, Acetal, 275 lbf Design Load - MROSupply.com

Thomson Linear MTS4-4308 Lead Nut Only, MTS Style, Flange Mount, 0.4375 in X 0.500 in, Non-Preloaded, RH, Acetal, 75 lbf Design Load - MROSupply.com

Thomson Linear OPN101824 Linear Bearing, Ball Bushing only, Precision Steel, 0.625 in, Open, Not Self-aligning, Adjustable, A Grade; Use with 0.625 in Diameter Class L Shaft in continuously supported applications - MROSupply.com

Thomson Linear OPN122026SS Linear Bearing, Ball Bushing only, Precision Steel, 0.75 in, Open, Not Self-aligning, Adjustable, Stainless Steel, A Grade; Use with 0.75 in Diameter Class L Shaft in continuously supported applications - MROSupply.com

Thomson Linear OPN487296-SP LINEAR BEARING BALL BUSHING ONLY PRECISION STEEL 3 IN OPEN NOT SELF-ALIGNING ADJUSTABLE STAINLESS STEEL BALLS BLACK OXIDE RETAINER AND SLEEVE A GRADE USE WITH 3 IN DIAMETER CLASS L SHAFT IN CONTINUOUSLY SUPPORTED APPLICATIONS - MROSupply.com

Thomson Linear P24-20B5-18RD Actuator, Electrak 100, 24 Vdc | MROSupply.com

Thomson Linear PB16ADJSS Linear Bearing, Ball Bushing, Pillow Block, Precision Steel, 1 in, Closed, Self-aligning, Adjustable, Stainless Steel, Integral Seals both ends; Use with 1 in Diameter Class L Shaft in end supported applications - MROSupply.com

Thomson Linear PBO8OPNSS Linear Bearing, Ball Bushing, Pillow Block, Precision Steel, 0.5 in, Open, Self-aligning, Adjustable, Stainless Steel, Integral Seals both ends; Use with 0.5 in Diameter Class L Shaft in continuously supported applications - MROSupply.com

Thomson Linear PG12-58B65-XXNXXX Actuator, KIT: MOTOR GEARBOX 12VDC, 58:1, STD - MROSupply.com

Thomson Linear PPA12-18B65-12NLSX Actuator, PPA, 12 Vdc, 750 lbf, 12 in, Limit Switches, Cable length 16.5 in, Flying Leads, 1.1 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA12-18B65-36NPOX Actuator, PPA, 12 Vdc, 750 lbf, 36 in, Potentiometer, Cable length 16.5 in, Flying Leads, 1.1 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA12-58B65-12NXXX Actuator, PPA, 12 Vdc, 1500 lbf, 12 in, No Feedback, Cable length 16.5 in, Flying Leads, 0.37 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA24-18B65-24NLSX Actuator, PPA, 24 Vdc, 750 lbf, 24 in, Limit Switches, Cable length 16.5 in, Flying Leads, 1.1 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA24-18B65-36NLSX Actuator, PPA, 24 Vdc, 750 lbf, 36 in, Limit Switches, Cable length 16.5 in, Flying Leads, 1.1 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA24-18B65-36NPOX Actuator, PPA, 24 Vdc, 750 lbf, 36 in, Potentiometer, Cable length 16.5 in, Flying Leads, 1.1 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA36-18B65-04NLSX Actuator, PPA, 36 Vdc, 750 lbf, 4 in, Limit Switches, Cable length 16.5 in, Flying Leads, 1.1 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA36-18B65-24NHSX Actuator, PPA, 36 Vdc, 750 lbf, 24 in, Encoder, Cable length 16.5 in, Flying Leads, 1.1 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA36-18B65-24NXXX Actuator, PPA, 36 Vdc, 750 lbf, 24 in, No Feedback, Cable length 16.5 in, Flying Leads, 1.1 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA36-18B65-36NLSX Actuator, PPA, 36 Vdc, 750 lbf, 36 in, Limit Switches, Cable length 16.5 in, Flying Leads, 1.1 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA36-58B65-24NXXX Actuator, PPA, 36 Vdc, 1500 lbf, 24 in, No Feedback, Cable length 16.5 in, Flying Leads, 0.37 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA90-18B65-12NLSX Actuator, PPA, 90 Vdc, 750 lbf, 12 in, Limit Switches, Cable length 16.5 in, Flying Leads, 0.63 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA90-18B65-18NLSX Actuator, PPA, 90 Vdc, 750 lbf, 18 in, Limit Switches, Cable length 16.5 in, Flying Leads, 0.63 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA90-18B65-18NXXX Actuator, PPA, 90 Vdc, 750 lbf, 18 in, No Feedback, Cable length 16.5 in, Flying Leads, 0.63 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA90-18B65-36NPOX Actuator, PPA, 90 Vdc, 750 lbf, 36 in, Potentiometer, Cable length 16.5 in, Flying Leads, 0.63 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA90-58B65-04NHSX Actuator, PPA, 90 Vdc, 1500 lbf, 4 in, Encoder, Cable length 16.5 in, Flying Leads, 0.17 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA90-58B65-12NLSX Actuator, PPA, 90 Vdc, 1500 lbf, 12 in, Limit Switches, Cable length 16.5 in, Flying Leads, 0.17 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA90-58B65-36NLSX Actuator, PPA, 90 Vdc, 1500 lbf, 36 in, Limit Switches, Cable length 16.5 in, Flying Leads, 0.17 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear PPA90-58B65-36NPOX Actuator, PPA, 90 Vdc, 1500 lbf, 36 in, Potentiometer, Cable length 16.5 in, Flying Leads, 0.17 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear S1000OPN-DD Linear Bearing, Seal, Rubber, Accessory, 1 in, Open, Replacement Internal - MROSupply.com

Thomson Linear S500OPN-DD Linear Bearing, Seal, Rubber, Accessory, 0.5 in, Open, Replacement Internal - MROSupply.com

Thomson Linear SB10-12X2.5M Lead Nut Only, SB Style, Thread Mount, 12 mm X 25 mm, Non-Preloaded, RH, Acetal, 100 lbf Design Load - MROSupply.com

Thomson Linear SB15-12X3M Lead Nut Only, SB Style, Thread Mount, 12 mm X 45 mm, Non-Preloaded, RH, Acetal, 100 lbf Design Load - MROSupply.com

Thomson Linear SB7-16X2.3M Lead Nut Only, SB Style, Thread Mount, 16 mm X 16 mm, Non-Preloaded, RH, Acetal, 160 lbf Design Load - MROSupply.com

Thomson Linear SCB4TWN-DD Linear Bearing, Cartridge, Super, 0.25 in, Closed, Twin, Self-aligning, Integral Seals both ends; Use with 0.25 in Diameter Class L Shaft in end supported applications - MROSupply.com

Thomson Linear SN10-20X5M Lead Nut Only, SN Style, Thread Mount, 20 mm X 50 mm, Non-Preloaded, RH, Acetal, 300 lbf Design Load - MROSupply.com

Thomson Linear SN2-2516X Lead Nut Only, SN Style, Thread Mount, 0.250 in X 0.125 in, Non-Preloaded, RH, Acetal, 45 lbf Design Load - MROSupply.com

Thomson Linear SN2-3708X Lead Nut Only, SN Style, Thread Mount, 0.375 in X 0.250 in, Non-Preloaded, RH, Acetal, 70 lbf Design Load - MROSupply.com

Thomson Linear SN2-3710X Lead Nut Only, SN Style, Thread Mount, 0.375 in X 0.200 in, Non-Preloaded, RH, Acetal, 70 lbf Design Load - MROSupply.com

Thomson Linear SN4-3108X Lead Nut Only, SN Style, Thread Mount, 0.3125 in X 0.500 in, Non-Preloaded, RH, Acetal, 70 lbf Design Load - MROSupply.com

Thomson Linear SNAB1820X Lead Nut Only, SNAB Style, 0.1875 in X 0.050 in, Anti-Backlash, RH, Acetal, 10 lbf Design Load - MROSupply.com

Thomson Linear SNAB24X5M Lead Nut Only, SNAB Style, 24 mm X 5 mm, Anti-Backlash, RH, Acetal, 300 lbf Design Load - MROSupply.com

Thomson Linear SNAB4-3108X Lead Nut Only, SNAB Style, 0.3125 in X 0.500 in, Anti-Backlash, RH, Acetal, 50 lbf Design Load - MROSupply.com

Thomson Linear SNAB4-6208X Lead Nut Only, SNAB Style, 0.625 in X 0.500 in, Anti-Backlash, RH, Acetal, 160 lbf Design Load - MROSupply.com

Thomson Linear SNAB7510X Lead Nut Only, SNAB Style, 0.75 in X 0.100 in, Anti-Backlash, RH, Acetal, 300 lbf Design Load - MROSupply.com

Thomson Linear SNAB8-5010X Lead Nut Only, SNAB Style, 0.500 in X 0.800 in, Anti-Backlash, RH, Acetal, 150 lbf Design Load - MROSupply.com

Thomson Linear SP12-09A4-04 Actuator, Electrak 1, 12 Vdc, 25 lbf, 4.5 in, Potentiometer, Cable length 2 in, Connector (Motor), Flying Leads (Feedback), 2.10 in/s Travel Rate Full Load - MROSupply.com

Thomson Linear SPB12OPN-L4L Linear Bearing, Ball Bushing, Pillow Block, Super, 0.75 in, Open, Self-aligning, Adjustable, Lube for Life; Use with 0.75 in Diameter Class L Shaft in continuously supported applications - MROSupply.com

Thomson Linear SPB24-L4L Linear Bearing, Ball Bushing, Pillow Block, Super, 1.5 in, Closed, Self-aligning, Lube for Life; Use with 1.5 in Diameter Class L Shaft in end supported applications - MROSupply.com

Thomson Linear SPB8ADJ-CR Linear Bearing, Ball Bushing, Pillow Block, Super, 0.5 in, Closed, Self-aligning, Adjustable, Corrosion Resistant; Use with 0.5 in Diameter Class L Shaft in end supported applications - MROSupply.com

Thomson Linear SPM40OPNWW Linear Bearing, Ball Bushing only, Super, 40 mm, Open, Self-aligning, Adjustable, Integral Wiper both ends; Use with 40 mm Diameter Class L Shaft in continuously supported applications - MROSupply.com

Thomson Linear SPPBOAM50 Linear Bearing, Ball Bushing, Pillow Block, Super, 50 mm, Open, Self-aligning, Adjustable; Use with 50 mm Diameter Shaft in continuously supported applications - MROSupply.com

Thomson Linear SPR2-1008 Lead Screw Only, SPR Style, Precision, 1 in X 0.250 in, RH, 0.003 in/ft Lead Accuracy, Stainless Steel 303, Number of Starts 2 - MROSupply.com

Thomson Linear SPR2-3112 Lead Screw Only, SPR Style, Precision, 0.3125 in X 0.167 in, RH, 0.003 in/ft Lead Accuracy, Stainless Steel 303, Number of Starts 2, 72 in Long - MROSupply.com

Thomson Linear SPR2-4316 Lead Screw Only, SPR Style, Precision, 0.4375 in X 0.125 in, RH, 0.003 in/ft Lead Accuracy, Stainless Steel 303, Number of Starts 2, 144 in Long - MROSupply.com

Thomson Linear SPR4-6208 Lead Screw Only, SPR Style, Precision, 0.625 in X 0.500 in, RH, 0.003 in/ft Lead Accuracy, Stainless Steel 303, Number of Starts 4, 144 in Long - MROSupply.com

Thomson Linear SPR7-16X2.3M Lead Screw Only, SPR Style, Precision, 16 mm X 16 mm, RH, 75 ?m/300mm Lead Accuracy, Stainless Steel 303, Number of Starts 7, 3606.8 mm Long - MROSupply.com

Thomson Linear SR16-PDL48 Shaft Support, Rail Only, Standard Profile, Predrilled, Aluminum, 48 in Long, Use with 1 in Diameter Shaft - MROSupply.com

Thomson Linear SRA2-1008 Lead Screw Only, SRA Style, 1 in X 0.250 in, RH, 0.010 in/ft Lead Accuracy, Stainless Steel 303, Number of Starts 2, 144 in Long - MROSupply.com

Thomson Linear SRA5-16X5M Lead Screw Only, SRA Style, 16 mm X 25 mm, RH, 250 ?m/300mm Lead Accuracy, Stainless Steel 303, Number of Starts 5, 142 in Long - MROSupply.com

Thomson Linear SS6UTWNA8 Linear Bearing, Ball Bushing, Pillow Block, Super Smart, 0.5 in, Closed, Twin, Self-aligning, Adjustable; Use with 0.5 in Diameter Class L Shaft in end supported applications - MROSupply.com

Thomson Linear SSEM16OPNWW Linear Bearing, Ball Bushing only, Super Smart, 16 mm, Open, Self-aligning, Adjustable, Integral Wiper both ends; Use with 16 mm Diameter Class MM (h6) Shaft in continuously supported applications - MROSupply.com

Thomson Linear SSEM20OPNWW Linear Bearing, Ball Bushing only, Super Smart, 20 mm, Open, Self-aligning, Adjustable, Integral Wiper both ends; Use with 20 mm Diameter Class MM (h6) Shaft in continuously supported applications

Thomson Linear SSEM25OPNWW Linear Bearing, Ball Bushing only, Super Smart, 25 mm, Open, Self-aligning, Adjustable, Integral Wiper both ends; Use with 25 mm Diameter Class MM (h6) Shaft in continuously supported applications

Thomson Linear SSEM30OPN Linear Bearing, Ball Bushing only, Super Smart, 30 mm, Open, Self-aligning, Adjustable; Use with 30 mm Diameter Class MM (h6) Shaft in continuously supported applications

Thomson Linear SSEPBM30DD Linear Bearing, Ball Bushing, Pillow Block, Super Smart, 30 mm, Closed, Self-aligning, Integral Seals both ends; Use with 30 mm Diameter Shaft in end supported applications

Thomson Linear SSEPBOM20-XS Linear Bearing, Ball Bushing, Pillow Block, Super Smart, 20 mm, Open, Self-aligning, Black Anodize; Use with 20 mm Diameter Shaft in continuously supported applications - MROSupply.com

Thomson Linear SSETWNM30DD Linear Bearing, Ball Bushing, Pillow Block, Super Smart, 30 mm, Closed, Twin, Self-aligning, Adjustable, Integral Seals both ends; Use with 30 mm Diameter Shaft in end supported applications

Thomson Linear SSETWNOM25-XS Linear Bearing, Ball Bushing, Pillow Block, Super Smart, 25 mm, Open, Twin, Self-aligning, Black Anodize; Use with 25 mm Diameter Shaft in continuously supported applications - MROSupply.com

Thomson Linear SSU16OPNW Linear Bearing, Ball Bushing only, Super Smart, 1 in, Open, Self-aligning, Adjustable, Integral Wiper one end; Use with 1 in Diameter Class L Shaft in continuously supported applications - MROSupply.com

Thomson Linear SSU20OPNWW Linear Bearing, Ball Bushing only, Super Smart, 1.25 in, Open, Self-aligning, Adjustable, Integral Wiper both ends; Use with 1.25 in Diameter Class L Shaft in continuously supported applications

Thomson Linear SSU20WW-CR Linear Bearing, Ball Bushing only, Super Smart, 1.25 in, Closed, Self-aligning, Adjustable, Corrosion Resistant, Integral Wiper both ends; Use with 1.25 in Diameter Class L Shaft in end supported applications - MROSupply.com

Thomson Linear SSUPB20-L4L Linear Bearing, Ball Bushing, Pillow Block, Super Smart, 1.25 in, Closed, Self-aligning, Lube for Life; Use with 1.25 in Diameter Class L Shaft in end supported applications - MROSupply.com

Thomson Linear SSUPB20-XS Linear Bearing, Ball Bushing, Pillow Block, Super Smart, 1.25 in, Closed, Self-aligning, Black Anodize; Use with 1.25 in Diameter Class L Shaft in end supported applications - MROSupply.com

Thomson Linear SSUPBA16-CR Linear Bearing, Ball Bushing, Pillow Block, Super Smart, 1 in, Closed, Self-aligning, Adjustable, Corrosion Resistant; Use with 1 in Diameter Class L Shaft in end supported applications - MROSupply.com

Thomson Linear SSUPBO12-L4L Linear Bearing, Ball Bushing, Pillow Block, Super Smart, 0.75 in, Open, Self-aligning, Adjustable, Lube for Life; Use with 0.75 in Diameter Class L Shaft in continuously supported applications - MROSupply.com

Thomson Linear SSUPBO24-L4L Linear Bearing, Ball Bushing, Pillow Block, Super Smart, 1.5 in, Open, Self-aligning, Adjustable, Lube for Life; Use with 1.5 in Diameter Class L Shaft in continuously supported applications - MROSupply.com

Thomson Linear SSUTWNA16 Linear Bearing, Ball Bushing, Pillow Block, Super Smart, 1 in, Closed, Twin, Self-aligning, Adjustable; Use with 1 in Diameter Class L Shaft in end supported applications - MROSupply.com

Thomson Linear SSUTWNO24-XS Linear Bearing, Ball Bushing, Pillow Block, Super Smart, 1.5 in, Open, Twin, Self-aligning, Adjustable, Black Anodize; Use with 1.5 in Diameter Class L Shaft in continuously supported applications - MROSupply.com

Thomson Linear SUPER12-DD Linear Bearing, Ball Bushing only, Super, 0.75 in, Closed, Self-aligning, Adjustable, Integral Seals both ends; Use with 0.75 in Diameter Class L Shaft in end supported applications - MROSupply.com

Thomson Linear SUPER12OPN-CR Linear Bearing, Ball Bushing only, Super, 0.75 in, Open, Self-aligning, Adjustable, Corrosion Resistant; Use with 0.75 in Diameter Class L Shaft in continuously supported applications - MROSupply.com

Thomson Linear SUPER20OPN-NB Linear Bearing, Ball Bushing only, Super, 1.25 in, Open, Self-aligning, Adjustable, Nylon Balls; Use with 1.25 in Diameter Class L Shaft in continuously supported applications - MROSupply.com

Thomson Linear SUPER32OPN Linear Bearing, Ball Bushing only, Super, 2 in, Open, Self-aligning, Adjustable; Use with 2 in Diameter Class L Shaft in continuously supported applications - MROSupply.com