CategoryL2: Cutting Tools

Products with this attribute (2543 total)

Corner Radius End Mill, 20.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Metric, 0.50mm, 38.00 mm, 115.00 mm

Corner Radius End Mill, 20.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Metric, 0.75mm, 38.00 mm, 104.00 mm

Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1200 in, 25/32 in, 140.00mm

Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1600 in, 25/32 in, 130.00mm

Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Metric, 0.50mm, 38.00mm, 104.00mm

Corner Radius End Mill, 20.00mm Milling Dia., Metric, 4.00mm, 38.00mm, 104.00mm

Corner Radius End Mill, 20.00mm Milling Dia., TAZ, Metric, 0.10mm, 32.00mm, 104.00mm

Corner Radius End Mill, 25.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.0800 in, 63/64 in, 110.00mm

Corner Radius End Mill, 25.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1600 in, 63/64 in, 110.00mm

Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Altima, Straight, Metric, 0.50mm, 8.00 mm, 57.00 mm

Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Metric, 0.25mm, 3.00 mm, 57.00 mm

Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat, Metric, 0.25mm, 4.00 mm, 50.00 mm

Corner Radius End Mill, 3.80mm Milling Dia., Carbide, TiAlN, Metric, 0.08mm, 4.00mm, 54.00mm

Corner Radius End Mill, 3/16 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.015 in, 5/16 in, 2 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1 1/2 in, 4 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.05 in, 3/4 in, 6 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 1 1/2 in, 6 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 1 1/2 in, 4 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 1 1/2 in, 5 1/2 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.06 in, 1 3/4 in, 4 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 4 in, 6 1/4 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.06 in, 1 3/4 in, 4 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.156 in, 1 in, 7 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.19 in, 1 3/4 in, 4 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 7/8 in, 2 1/2 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 7/8 in, 2 1/2 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 7/8 in, 2 1/2 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.015 in, 1/2 in, 5 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.06 in, 1 1/8 in, 2 1/2 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1/2 in, 2 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 3/4 in, 2 1/2 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 2 1/2 in, 4 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, TiN, Straight, Fractional Inch, 0.09 in, 1/2 in, 4 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, TiN, Straight, Fractional Inch, 0.12 in, 1/2 in, 4 in

Corner Radius End Mill, 4.00 mm Milling Dia., Carbide, TiAlN, Straight, Metric, 0.20mm, 11.00 mm, 70.00 mm

Corner Radius End Mill, 4.00mm Milling Dia., Carbide, TiAlN, Metric, 0.50mm, 11.00mm, 57.00mm

Corner Radius End Mill, 5.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 0.25mm, 7.50 mm, 76.00 mm

Corner Radius End Mill, 5.75 mm Milling Dia., Carbide, TiAlN, Metric, 0.16mm, 6.00 mm, 54.00 mm

Corner Radius End Mill, 5.75mm Milling Dia., Carbide, TiAlN, Metric, 0.16mm, 6.00mm, 54.00mm

Corner Radius End Mill, 5/16 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.01 in, 13/16 in, 2 1/2 in

Corner Radius End Mill, 5/16 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.02 in, 1/2 in, 2 1/2 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.015 in, 15/16 in, 5 31/32 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 1 1/4 in, 4 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 1 1/4 in, 3 1/2 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 3 1/8 in, 5 1/2 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.09 in, 1 1/4 in, 3 1/2 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.03 in, 3/4 in, 4 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, TiN, Straight, Fractional Inch, 0.02 in, 1 1/4 in, 3 1/2 in

Corner Radius End Mill, 6.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0200 in, 15/64 in, 2 53/64 in

Corner Radius End Mill, 6.00mm Milling Dia., TiAlN, Metric, 0.1200 in, 15/64 in, 2 1/2 in

Corner Radius End Mill, 7.94mm Milling Dia., Carbide, TiAlN, Metric, 0.0800 in, 13/16 in, 3 in

Corner Radius End Mill, 7/16 in Milling Dia., Carbide, TiN, Straight, Fractional Inch, 0.06 in, 1 in, 2 3/4 in

Corner Radius End Mill, 8.00 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat, Metric, 0.45mm, 16.00 mm, 63.00 mm

Corner Radius End Mill, 8.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0200 in, 5/16 in, 2 31/64 in

Corner Radius End Mill, 8.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0400 in, 5/16 in, 2 31/64 in

Corner Radius End Mill, 9.53mm Milling Dia., Carbide, TiAlN, Metric, 0.0800 in, 7/8 in, 3 in

Corner Radius End Mill,0.187" Shank dia.

Corner Radius End Mill,0.250" Shank dia.

Corner Radius End Mill,0.375" Shank dia.

Corner Radius End Mill,0.500" Shank dia.

Corner Radius End Mill,0.625" Shank dia.

Corner Radius End Mill,1.000" Shank dia.

Corner Radius End Mill,nACo,2.000" L

Corner Radius End Mill,nACo,2.500" L

Corner Radius End Mill,nACo,4.000" L

Corner Radius End Mill,nACo,5.000" L

Corner Radius End Mill,WS15PE Grade

Counterbore with Built-In Pilot, High Speed Steel, #10, Wire, Oversized

Countersink, 100 Degrees , 1 in, Cobalt, TiN

Countersink, 100 Degrees , 1/8 in, Carbide, TiAlN

Countersink, 100 Degrees , 3/8 in, Cobalt, TiN

Countersink, 110 Degrees , 2 in, High Speed Steel, TiN

Countersink, 120 Degrees , 5/16 in, Carbide, TiAlN

Countersink, 82 Degrees , 1 1/2 in, High Speed Steel, TiN

Countersink, 90 Degrees , 3/4 in, Cobalt, TiN

Countersink, Hss, 82 deg., 1/2", Number of Flutes: 6

Countersink,Carbide,1F,120 deg.,1/2 In.

Countersink,Carbide,DE,60 deg.,1/8 In.

Countersink,Hss,1F,100 deg.,2-1/2 In.

Countersink,Hss,60 deg.,3/4 In.

Countersink,Hss,DE,1F,100 deg.,5/8 In. x

Countersink,Hss,DE,1F,120 deg.,1/2 In. x

Countersink,Hss,DE,1F,90 deg.,3/8 In. x

Cut-Off and Grooving Blade, Left Hand, High Speed Steel, ANSI Code WGCM65L0816MC, Coolant Fed Coolant Through, Cutting Application Chamfering, Cut-Off, Facing, Grooving, Outside Diameter Deep Grooving, Profiling, Cutting Height 28.76 mm

Cutting Unit,KM Mini KM25 PIN/Clamp

Cutting Unit,Screw On,RH,93Deg,DC11T3

D Plain Keyway Bushing 1-3/4 In.

Depth M35 Cobalt Annular Cutter 1-3/4X2 In.

Depth M35 Cobalt Annular Cutter 1-9/16X1

Diamond Groove Drill Bushing (DG), Standard Wall, Headless, Fractional Inch, 1/4 in

Diamond Groove Drill Bushing (DG), Standard Wall, Headless, Fractional Inch, 1/8 in