CategoryL2: Cutting Tools

Products with this attribute (2543 total)

Straight Flute Drill Bit, Drill Bit Size 7.50 mm, 120 Degrees Drill Bit Point Angle, Material - Machining Carbide, Finish - Machining Bright (Uncoated), Decimal Equivalent 0.2953, Metric, Web Thinned Drill Bit Point Type, Flute Length 127.00 mm

Straight Flute Drill,Size 3/16 in,Bright

Straight Flute Hand Tap , M40-2.00 , Plug , 4 Flutes, UNC

Straight Flute Hand Tap , M42-3.00 , Plug , 4 Flutes, UNC

Straight Flute Hand Tap, Series DWT, Imperial, 1386 Thread, Bottoming Chamfer, 6 Flutes, Carbon

Straight Flute Tap, Thread Size 1/4 In.-20, UNC, Bottoming, Overall Length 3 1/8 in, Powdered Metal, TiCN, Right Hand, Thread Length 9/16 in, 75 Percent Thread Drill Size #7, Thread Limit H5

Straight Flute Tap, Thread Size 1/4 In.-28, UNF, Bottoming, Overall Length 2 1/2 in, Powdered Metal, TiCN, Right Hand, Thread Length 9/16 in, 75 Percent Thread Drill Size 5.45 mm, Thread Limit H3

Straight Flute Tap, Thread Size 3/8 In.-24, UNF, Bottoming, Overall Length 2 29/32 in, Powdered Metal, TiCN, Right Hand, Thread Length 3/4 in, 75 Percent Thread Drill Size 8.50 mm, Thread Limit H3

Straight Flute Tap, Thread Size M10x1.25, Metric Fine, Bottoming, Overall Length 74.00 mm, Powdered Metal, TiCN, Right Hand, Thread Length 18.00 mm, 75 Percent Thread Drill Size 11/32 in, Thread Limit D6

Straight Flute Tap, Thread Size M8x1.25, Metric Coarse, Bottoming, Overall Length 69.00 mm, Powdered Metal, TiCN, Right Hand, Thread Length 15.00 mm, 75 Percent Thread Drill Size H, Thread Limit D5

Straight Flute Tap, Thread Size M8x1.25, Metric Coarse, Bottoming, Overall Length 90.00 mm, Powdered Metal, TiCN, Right Hand, Thread Length 15.00 mm, 75 Percent Thread Drill Size H, Thread Limit D5

Straight, Thread Mill, Metric, Carbide, Bright (Uncoated), 0.7400 in

Straight, Thread Mill, NPTF, Carbide, Bright (Uncoated), 0.2800 in

Straight, Thread Mill, NPTF, Carbide, TiAlN, 0.4350 in

Straight, Thread Mill, UN, Carbide, TiAlN, 0.0980 in

Straight, Thread Mill, UN, Carbide, TiAlN, 0.1870 in

Straight, Thread Mill, UN, Carbide, TiAlN, 0.2900 in

Straight, Thread Mill, UN, Carbide, TiAlN, 0.3450 in

Straight, Thread Mill, UN, Carbide, TiAlN, 0.9900 in

Straight, Thread Mill, UN, Carbide, TiAlN, 1/2 in

Straight, Thread Mill, UN, Carbide, TiAlN, 7/64 in

Stub Bit,SC,HP,V,1-3/4 In.-FL,TiAlN

Style MWLNR 12-3B Turning Tool Holder

Style Slthr 19-4 Cut-Off Tool Holder-Gtn

T27 HALF CUT TOTX 38SQ DR

Tap Extension, Overall Length 5 1/8 in, High Speed Steel, For Tap Square Size 0.2380 in, Fits Tap Size 5/16 in, For Tap Shank Dia. 0.3180 in, Shank Dia. 5/16 in, Includes Nut, Body Dia. 1/2 in, Coolant Fed Coolant Through, Extension Square Size 0.2380 in

Tap, Thread Size 1/4 In.-20, UNC, Plug, Overall Length 3 5/32 in, High Speed Steel, TiN, Right Hand, Thread Length 1 3/16 in

Taper Length Drill Bit, Drill Bit Size 11.70 mm, Drill Bit Point Angle 140 Degrees

Taper Length Drill Bit, Drill Bit Size 3.60 mm, Drill Bit Point Angle 140 Degrees , Split Point, Carbide, TiAlN+AlCrN

Taper Length Drill Bit, Drill Bit Size 9.00 mm, Drill Bit Point Angle 140 Degrees , Split Point, Carbide, TiAlN

Tapping Adapter, Tap Shank Dia. 5.00mm, Tap Size M4 (DIN 371), M6 (DIN 374/376 ISO), Adapter Connection Size 01, Tap Square Size 4.00mm, Flange Dia. 32.00mm, For Use With Tapping Machines

Tapping Adapter, Tap Shank Dia. 9.00mm, Tap Size M12 (DIN 374/376 ISO), Adapter Connection Size 01, Tap Square Size 7.10mm, Flange Dia. 32.00mm, For Use With Tapping Machines

TCT Annular Cutter with Universal Shank,1-1/16" x 2"

The combination of rotation and percussion helps the drill achieve a cutting and grinding rotary action at the same time as a chipping percussive action, chipping away at rock to produce a hole. Usually these motions are hydraulically or pneumatically driven.

This spade bit is designed to work with either quick-change or standard chuck drills and drivers. Extended spurs cut crisp, clean holes quickly, even in thick stock. Each of these spade bits is forged, heat-treated and clearly stamped for easy size identification.

Thread Forming Tap, Thread Size #10-32, UNF, Overall Length 2 23/64 in, Cobalt, TiCN, Right Hand, Thread Length 9/16 in, 75 Percent Thread Drill Size 4.40 mm, Thread Limit H2

Thread Forming Tap, Thread Size #2-56, UNC, Overall Length 1 3/4 in, Cobalt, TiN, Right Hand, Thread Length 3/8 in, 75 Percent Thread Drill Size 1.73 mm, Thread Limit H6

Thread Forming Tap, Thread Size #2-64, UNF, Overall Length 1 3/4 in, Cobalt, Black Oxide, Right Hand, Thread Length 3/8 in, 75 Percent Thread Drill Size 5/64 in, Thread Limit H7

Thread Forming Tap, Thread Size 1/2 In.-20, UNC, Overall Length 3 3/8 in, Cobalt, TiCN, Right Hand, Thread Length 7/8 in, 75 Percent Thread Drill Size 12.05 mm, Thread Limit H10

Thread Forming Tap, Thread Size 1/4 In.-20, UNC, Overall Length 2 1/2 in, Cobalt, TiCN, Right Hand, Thread Length 5/8 in, 75 Percent Thread Drill Size 5.70 mm, Thread Limit H2

Thread Forming Tap, Thread Size 1/4 In.-28, UNF, Overall Length 2 1/2 in, Cobalt, Black Oxide, Right Hand, Thread Length 9/16 in, 75 Percent Thread Drill Size 5.90 mm, Thread Limit H6, Class of Fit 2B

Thread Forming Tap, Thread Size 1/4 In.-28, UNF, Overall Length 2 1/2 in, VC-10, TiCN, Right Hand, Thread Length 9/16 in, 75 Percent Thread Drill Size 5.90 mm, Thread Limit H6, Class of Fit 2B

Thread Forming Tap, Thread Size 1/4 In.-28, UNF, Overall Length 3 9/64 in, Cobalt, TiCN, Right Hand, Thread Length 1/2 in, 75 Percent Thread Drill Size 5.90 mm, Thread Limit H6, Class of Fit 2B, Tap Length Standard DIN

Thread Forming Tap, Thread Size 3/8 In.-16, UNC, Overall Length 2 15/16 in, Cobalt, TiCN, Right Hand, Thread Length 3/4 in, 75 Percent Thread Drill Size 11/32 in, Thread Limit H6

Thread Forming Tap, Thread Size 3/8 In.-16, UNC, Overall Length 2 15/16 in, Cobalt, TiCN, Right Hand, Thread Length 3/4 in, 75 Percent Thread Drill Size 11/32 in, Thread Limit H9

Thread Forming Tap, Thread Size 3/8 In.-16, UNC, Overall Length 2 15/16 in, VC-10, TiCN, Right Hand, Thread Length 3/4 in, 75 Percent Thread Drill Size 11/32 in, Thread Limit H9

Thread Forming Tap, Thread Size 5/16 In.-18, UNC, Overall Length 2 23/32 in, Cobalt, Black Oxide, Right Hand, Thread Length 5/8 in, 75 Percent Thread Drill Size 7.20 mm, Thread Limit H8

Thread Forming Tap, Thread Size 5/16 In.-18, UNC, Overall Length 2 23/32 in, Cobalt, TiCN, Right Hand, Thread Length 5/8 in, 75 Percent Thread Drill Size 7.20 mm, Thread Limit H6

Thread Forming Tap, Thread Size 5/16 In.-24, UNF, Overall Length 2 23/32 in, Cobalt, Black Oxide, Right Hand, Thread Length 5/8 in, 75 Percent Thread Drill Size 7.40 mm, Thread Limit H6

Thread Forming Tap, Thread Size 5/16 In.-24, UNF, Overall Length 2 23/32 in, Cobalt, TiCN, Right Hand, Thread Length 5/8 in, 75 Percent Thread Drill Size 7.40 mm, Thread Limit H4

Thread Forming Tap, Thread Size 5/16 In.-24, UNF, Overall Length 2 23/32 in, Cobalt, TiCN, Right Hand, Thread Length 5/8 in, 75 Percent Thread Drill Size 7.40 mm, Thread Limit H8

Thread Forming Tap, Thread Size 5/8 In.-18, UNF, Overall Length 3 13/16 in, Cobalt, TiN, Right Hand, Thread Length 1 1/16 in, 75 Percent Thread Drill Size 15.15 mm, Thread Limit H12

Thread Forming Tap, Thread Size 7/16 In.-20, UNF, Overall Length 3 9/64 in, Cobalt, Bright (Uncoated), Right Hand, Thread Length 13/16 in, 75 Percent Thread Drill Size Z, Thread Limit H8, Class of Fit 2B

Thread Forming Tap, Thread Size 9/16 In.-12, UNC, Overall Length 3 37/64 in, Cobalt, Bright (Uncoated), Right Hand, Thread Length 1 in, 75 Percent Thread Drill Size 13.20 mm, Thread Limit H12

Thread Forming Tap, Thread Size M1.4x0.3, Metric Coarse, Overall Length 40.00 mm, Cobalt, TiCN, Right Hand, Thread Length 7.00 mm, Thread Limit D5, Class of Fit 6H, Tap Length Standard DIN

Thread Forming Tap, Thread Size M10x1.5, Metric Coarse, Overall Length 74.00 mm, Cobalt, TiCN, Right Hand, Thread Length 18.00 mm, 75 Percent Thread Drill Size 9.20 mm, Thread Limit D6

Thread Forming Tap, Thread Size M10x1.5, Metric Coarse, Overall Length 74.00 mm, Cobalt, TiCN, Right Hand, Thread Length 18.00 mm, 75 Percent Thread Drill Size 9.20 mm, Thread Limit D9

Thread Forming Tap, Thread Size M4x0.7, Metric Coarse, Overall Length 54.00 mm, Cobalt, TiCN, Right Hand, Thread Length 8.00 mm, 75 Percent Thread Drill Size 3.65 mm, Thread Limit D7

Thread forming taps ''form'' the thread rather than cut it, which allows the thread to be created without producing any chips. Thread forming taps can run at faster operating rates than standard cut taps, and generally have a longer tool life, sometimes up to 5x longer in some applications. Ideal in materials such as aluminum, brass, copper, low carbon steels, zinc, and 302-303 stainless steel.

Thread Forming Taps, HSS-E Machine Thread Formers, TC410-M-C0, Thread

Thread Forming Taps, HSS-E Machine Thread Formers, TC410-M-C6, Thread Size - M 10

Thread Mill

Thread Mill - Multi Point Single Profile Solid Carbide Coated