CategoryL2: Machining

Products with this attribute (272 total)

Corner Radius End Mill, 1" Milling Diameter, Number of Flutes: 5, 1.500" Length of Cut, nACo, HGW5
CTFP-M5 3.0mm Hex Drive Insert Screw
Detent Pin 3/16 x 13/16 SS300 PL
Drill Chuck, Engine Drill, Threaded, Mounting Size 1/2 In.-20, Max. Drill Capacity 1/2 in
Drill Chuck, HSK, Mounting Size HSK63A, Max. Drill Capacity 1/2 in
End Mill Holder, Taper Size CV40, Bore Dia. 1/2 in, Projection 3 in, Nose Dia. 1-1/4 in
End Mill Replacement Lock Screw,2 in.
End Mill, 0.3125" Milling Diameter, Number of Flutes: 3, 0.437" Length of Cut, ZrN, GWA3
End Mill, 0.3750" Milling Diameter, Number of Flutes: 3, 0.500" Length of Cut, Bright (Uncoated)
ER 20 COLLET CHUCK - CVKV 40
ER COLLET CHUCK HSK63C 32ER
Er-20 Bt40 Spring Collet Chuck
Finger Clamp
GB70-85 M4 X 16 Screw
Gripper Adjustable M20X25, Form:B Tool Steel, Comp:Carbide
J.W. Winco GN822.8 Mini Indexing Plungers, Zinc Die-Cast, Lock-Out, 0.16"Dia., 0.2"L, 0.81"H
J.W. Winco GN822.8 Mini Indexing Plungers, Zinc Die-Cast, Non Lock-Out, 0.24"Dia., 0.47"L, 1"H
J.W. Winco GN822.8 Mini Indexing Plungers, Zinc Die-Cast, Non Lock-Out, 0.31"Dia., 0.79"L, 1.38"H
J.W. Winco GN822.9 Mini Indexing Plungers, SS, Lock-Out, 0.2"Dia., 0.24"L, 1"H, Plastic Knob
J.W. Winco GN822.9 Mini Indexing Plungers, SS, Lock-Out, 0.2"Dia., 0.24"L, 1"H, SS Knob
J.W. Winco GN822.9 Mini Indexing Plungers, SS, Lock-Out, 0.2"Dia., 0.47"L, 1"H, SS Knob
J.W. Winco GN822.9 Mini Indexing Plungers, SS, Non Lock-Out, 0.39"Dia., 0.79"L, 1.38"H, Plastic Knob
K0348.051016
K1456.025590
Knurling Holder, Features For Knurl Cutting;Supplied with Full Faced RS25HS Knurl Wheels TiN Coated;Uses Straight R Series Knurl Wheels for Male Diamond Pattern
Knurling Holder, Shank Dia. 2 3/4 in, For Knurl Face Width 1/4 in, For Knurl Hole Dia. 1/2 in
Knurling Wheel, Left Hand Diagonal, High Speed Steel, TiN, Outside Dia. 1 in
Knurling Wheel, Left Hand Diagonal, High Speed Steel, TiN, Outside Dia. 1/2 in
Lathe Jaw, Hard, For Use With 10 in Chucks, Overall Length 4 in, Overall Height 2.7300 in, Overall Width 1-1/2 in, 1.1810 in, Package Quantity 3
Lathe Jaw, Hard, For Use With 15 in Chucks, Overall Length 5.5100 in, Overall Height 3-1/2 in, Overall Width 2-1/2 in, 3 in, Package Quantity 3
Lathe Jaw, Soft, For Use With 12 in Chucks, Overall Length 5-1/2 in, Overall Height 4 in, Overall Width 2 in, 2-1/2 in, Package Quantity 3
Lathe Jaw, Soft, For Use With 15 in Chucks, Overall Length 6-1/2 in, Overall Height 3 in, Overall Width 2-1/2 in, 1.6930 in, Package Quantity 3
Lathe Jaw, Soft, For Use With 6 in Chucks, Overall Length 3.0900 in, Overall Height 3 in, Overall Width 1-1/4 in, 0.7870 in, Package Quantity 3
Lock Pin, Overall Length 33/64 in, 3/8 in, 5/64 in, #10-32
Milling Collet Chuck,8000 rpm,96in L
Milling Cutter Arbor Bolt, For Tool Holder Dia. 2 in, For Tool Holder Type Combination Shell End Mill Adapters and Face Mill Arbors
Mt1 Drift/Center Key
No. 3 Screw Extractor
Plain Back Lathe Chuck 3-Jaw 4 In.
Pm5X8 Screw
Positive Lock,5/8 In. x 3-1/2 In.,Button He
Powr Collet Chck,ER32,HSK125A,100mm Proj
Precision Collet,3/8 in.,ER20
Quick Release Pin, Push Button, Bright (Uncoated), Stainless Steel, Shank Dia. 1/2 in
Quick Release Pin, Push Button, Bright (Uncoated), Stainless Steel, Shank Dia. 3/16 in
R8 Round Collet 11/32 In.
Safety Shield,13-25/32 in.Lx7 in.W
Screw
Slim Collet Chuck,23.5 to 23.0mm,SK25
Slm Chck Collet On Sz Coolant,1/8in,SK10
Sm815.18L Insert Screw
Snap-Loc Systems [TM] 1/2 System Male Hose to Male Pipe Thread Y 3/8 BSPT Bag of 25
Snap-Loc Systems [TM] 1/4 System Hose to Hose Double Socket Female Pac of 2
Spring Plunger, Thread Size 1/4 In.-28, Thread Length 10.00mm, Plunger Material Stainless Steel, Plunger Dia. 3.00mm, Plunger Projection 3.50mm, Mounting Type Threaded, With Locking Plunger No, Final Nose Force 10 N, Initial Nose Force 4.5 N, Overall Length 34.50mm, Plunger Width 8.00mm, Handle Type Knob, Body Material Stainless Steel, Plunger Finish Bright (Uncoated), Retractable Yes, Standards RoHS
Spring Plunger, Thread Size 1/4 In.-28, Thread Length 10.00mm, Plunger Material Stainless Steel, Plunger Dia. 3.00mm, Plunger Projection 3.50mm, Mounting Type Threaded, With Locking Plunger No, Final Nose Force 10 N, Initial Nose Force 4.5 N, Overall Length 34.50mm, Plunger Width 8.00mm, Handle Type Knob, Body Material Stainless Steel, Plunger Finish Bright (Uncoated), Retractable Yes, Standards RoHS
Spring Plunger, Thread Size 3/8 In.-16, Plunger Material Steel, Plunger Dia. 0.2330 in, Plunger Projection 0.3700 in, Mounting Type Threaded, Ring Dia. 1.6800 in, Handle Type Pull Ring, Body Finish Zinc, Body Material Steel, Plunger Finish Zinc
Spring Plunger, Thread Size M20, Thread Length 35.00mm, Plunger Material Stainless Steel, Plunger Dia. 12.00mm, Plunger Projection 12.00mm, Mounting Type Threaded, With Locking Plunger Yes, Body Length 35.00mm, Final Nose Force 60 N, Initial Nose Force 20 N, Overall Length 70.00mm, Plunger Width 30.00mm, Handle Type Lever, Body Material Stainless Steel, Plunger Finish Bright (Uncoated), Retractable Yes, Standards RoHS, Thread Fully Threaded
Spring Plunger, Thread Size M2x1.5, Thread Length 25.00mm, Plunger Material Stainless Steel, Plunger Dia. 10.00mm, Plunger Projection 15.00mm, Mounting Type Threaded, With Locking Plunger No, Final Nose Force 43 N, Initial Nose Force 15 N, Overall Length 79.00mm, Plunger Width 22.00mm, Thread Pitch 1.50mm, Handle Type Knob, Body Material Stainless Steel, Handle Color Black Gray, Handle Material Thermoplastic, Plunger Finish Bright (Uncoated), Retractable Yes, Standards RoHS
Square End Mill, 0.3750" Milling Diameter, Number of Flutes: 3, 1" Length of Cut, Bright (Uncoated)
Straight Collet,KM1.1/4,3/16in
Surface Conditioning Belt, 3/8inx18 in A
T1603B Shim
Tapping Adapter,3/4" NPT
Tapping Collet,0.220 in. Shank,ER25
Tapping Collet,0.562 in. Shank,#2
Tapping Collet,1.021 in. Shank,#3
Tool Assembly Device, For Use With Mini HG02
Tool Post and Holder Set, Number of Pieces 5, QITP25N, Includes (2) QITP25N-2 Holders;(2) QITP2N5-1 Holders;QITP25N Tool Post
Tool Post and Holder Set, Number of Pieces 5, QITP30N, Includes (2) QITP30N-1 Holders;(2) QITP30N-2 Holders;QITP30N Tool Post
Tool Post and Holder Set, Number of Pieces 6, QITP60N, Includes (2) 3FGU6 Turning/Facing Tool Holders;3FGF8 Tool Post;3FGU7 Turning/Facing/Boring Tool Holder;3FGU9 Heavy Duty Boring Bar Holder;3FGV4 Reversible Cut-Off Tool Holder (Indexable Tooling and Inserts Not Included)
Tool Post and Holder Set, Number of Pieces 7, QITP30N, Includes 11IR-A60-DVP656 Insert;3FGF3 Tool Post;3FGJ4 Turning/Facing Tool Holder;3FGJ5 Turning/Facing/Boring Tool Holder;3FGK2 Reversible Cut-Off Tool Holder;3FGK5 OD/ID Tool Holder;NL50R Indexable Tool Holder;SGIH19-2 Indexable Tool Holder;SGTN-2-DVP656 Insert;STCMB06-2 Indexable Tool Holder;STNCR08-2J Indexable Tool Holder;TCMT-21.51-UM-DHCP25 Insert;TCMT-21.52-UM-DHCP25 Insert;TNMC-32NV-DVP656 Insert
Torque Wrench Insert,ER16 Power Chucks