CategoryL3: End Mills

Products with this attribute (792 total)

Square End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 1 in

Square End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 1/8 in, Overall Length 7 in, Shank Dia. 1 in

Square End Mill, 1.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 1.50 mm, Overall Length 60.00 mm, Shank Dia. 6.00 mm

Square End Mill, 1.40 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 2.10 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm

Square End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 6 in, Shank Dia. 1/2 in

Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 6 in, Shank Dia. 1/2 in

Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia. 1/2 in, Neck Dia. Not Applicable

Square End Mill, 1/2 in Milling Dia., Carbide, nACRo, Weldon Flat, Length of Cut 1 3/4 in, Overall Length 4 1/2 in, Shank Dia. 1/2 in

Square End Mill, 1/2 in Milling Dia., Carbide, nACRo, Weldon Flat, Length of Cut 1 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 1/2 in Milling Dia., ZrN, Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 1/4 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 3/4 in, Overall Length 2 1/2 in, Shank Dia. 1/4 in

Square End Mill, 1/4 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3/8 in, Overall Length 4 in, Shank Dia. 1/4 in, Neck Dia. 15/64 in

Square End Mill, 1/64 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/32 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 1/64 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/16 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 1/8 in Milling Dia., Bright (Uncoated), Straight, Length of Cut 1/4 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/2 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 1/8 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1/4 in, Overall Length 3 in, Shank Dia. 1/8 in

Square End Mill, 1/8 in Milling Dia., Carbide, TiAlN, Straight, Length of Cut 3/16 in, Overall Length 3 in, Shank Dia. 1/4 in, Neck Dia. 7/64 in

Square End Mill, 10.00 mm Milling Dia., Carbide, AlTiN, Straight, Length of Cut 22.00 mm, Overall Length 72.00 mm, Shank Dia. 10.00 mm

Square End Mill, 12.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 22.00 mm, Overall Length 130.00 mm, Shank Dia. 12.00 mm, Neck Dia. 11.500 mm

Square End Mill, 12.70 mm Milling Dia., TiAlN, Length of Cut 12.70 mm, Overall Length 88.9 mm, Shank Dia. 12.70 mm, Neck Dia. 0.48 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 100.00 mm, Shank Dia. 16.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 64.00 mm, Overall Length 141.00 mm, Shank Dia. 16.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 89.00 mm, Shank Dia. 16.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 35.00 mm, Overall Length 92.00 mm, Shank Dia. 16.00 mm

Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 4 in, Overall Length 7 3/4 in, Shank Dia. 2 in

Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 6 in, Overall Length 9 3/4 in, Shank Dia. 2 in

Square End Mill, 2.00 mm Milling Dia., TiAlN, Straight, Length of Cut 5.00 mm, Overall Length 50.00 mm, Shank Dia. 4.00 mm

Square End Mill, 20.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 38.00 mm, Overall Length 104.00 mm, Shank Dia. 20.00 mm

Square End Mill, 3.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 12.00 mm, Overall Length 39.00 mm, Shank Dia. 3.00 mm, Neck Dia. 0 in

Square End Mill, 3.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 4.50 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm

Square End Mill, 3/16 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3/8 in, Overall Length 3 in, Shank Dia. 3/16 in, Neck Dia. 5/32 in

Square End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 in, Overall Length 6 in, Shank Dia. 3/4 in

Square End Mill, 3/4 in Milling Dia., Carbide, TAZ, Straight, Length of Cut 1 37/64 in, Overall Length 4 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable

Square End Mill, 3/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 2 1/4 in, Overall Length 5 in, Shank Dia. 3/4 in

Square End Mill, 3/4 in Milling Dia., Carbide, ZrN, Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 3/4 in

Square End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 3/8 in, Neck Dia. Not Applicable

Square End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/2 in, Overall Length 4 in, Shank Dia. 3/8 in, Neck Dia. 11/32 in

Square End Mill, 5.00 mm Milling Dia., Altima, Straight, Length of Cut 13.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 4.500 mm

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5/16 in Milling Dia., ZrN, Straight, Length of Cut 27/64 in, Overall Length 2 1/2 in, Shank Dia. 19/64 in

Square End Mill, 5/32 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 9/16 in, Overall Length 2 in, Shank Dia. 3/16 in

Square End Mill, 5/64 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 5/32 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 5/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3/4 in, Overall Length 6 in, Shank Dia. 5/8 in, Neck Dia. 19/32 in

Square End Mill, 6.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 12.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 5.500 mm

Square End Mill, 7/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 7/8 in

Square End Mill, 8.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 19.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm

Square End Mill, 8.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 16.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm

Square End Mill, 9/16 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1 1/4 in, Overall Length 3 1/2 in, Shank Dia. 9/16 in

Square End Mill, 9/16 in Milling Dia., Carbide, AlTiN, Weldon Flat, Length of Cut 1 1/4 in, Overall Length 3 1/2 in, Shank Dia. 9/16 in

Square End Mill, 9/32 in Milling Dia., Carbide, ZrN, Straight, Length of Cut 3/4 in, Overall Length 2 1/2 in, Shank Dia. 5/16 in

Square End Mill, Center Cutting Single End, 18 Diameter Cutter, 2516 Overall Length, 38 Maxim

Square End Mill,0.2500" Milling dia.

Square End Mill,5/8" Cut Length,nACRo

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,WS15PE Grade,Carbide

Square Milling Head,DL20,Carbide

Square Milling Head,DL25,Carbide

Stellar Industrial | M.A. Ford? TuffCut? X-AL 138B50001 Ball Nose Center Cutting End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 3 Flutes, 1/2 in Dia Shank, 3 in OAL, Uncoated

Stellar Industrial | M.A. Ford? TuffCut? XT 27875039B Center Cutting Square End End Mill, 3/4 in Dia Cutter, 2-3/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 5 in OAL, ALtima? Blaze Coated

Stellar Industrial | YG-1 UGMF89040 General Purpose Imperial Regular Length End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, Y-Coated

Tuffcut Al 2 Flute End Mill Necked, 4.0Mm

Tuffcut Dm 2 Flute Ball Nose End Mill Necked, 3.0Mm

Tuffcut Dm 4 Flute End Mill Necked, 12.0Mm

Tuffcut Dm 4 Flute End Mill Necked, 6.0Mm

Tuffcut Gp 3 Flute End Mill Stub, 1/4

Tuffcut Gp 3 Flute End Mill, 5.0Mm

Tuffcut Gp 4 Flute End Mill Chipbreaker, 1/2

Tuffcut Gp 4 Flute End Mill, 7/16

Tuffcut Xr 4 Flute Ball Nose End Mill Variable Helix, 1.5Mm

Tuffcut Xr 4 Flute End Mill Variable Helix, 12.0Mm

Tuffcut Xr7 7 Flute End Mill, 5/8

VHSM-100-5K

WEZ Series Indexable Endmill 0.625in 2 Teeth

Xt Endmill Endmill 1/4X3/4X.015R