Anchor grip 30 rug pads provide the ultimate support system for your oriental, Persian, or area rug. Anchor- grip 30 is 100% felt and rubber rug pad designed for keeping rugs anchored to the floor while providing comfort and cushioning under your rugs. We offer a signature patterned natural rubber backing, which combines a full 10oz/sq. Yd. Of rubber with a reinforced 5oz/sq. Yard rubber face to prevent fraying, flaking, and premature wear. Our signature patterned backing is combined with a 3/8'' (30 ounce) layer of felt to help support and cushion your area rugs. This dense fiber core helps prolong the life of your area rugs by reducing wear and tear from daily use. This added layer of felt protection also provides insulation, noise reduction, and acoustical benefits. Anchor- grip 30 works well with all types of rugs, but especially with thinner flat woven rugs such as kilimns, dhurrie, and soumac rugs. Anchor- grip 30 is manufactured with 100% felt & rubber and contains no glues or adhesives that can outgas, offering a more natural & rug pad alternative to traditional plastic, vinyl, and PVC rug pads. Our felt is heat pressed to the rubber, not glued, for added durability. As the cost of rubber increases, Manufacturers have been using more "classy fillers" in their rug pads to reduce costs. The more classy fillers are used, the faster the rubber backing will fall apart and crumble. The alternative to most felt and rubber rug pads is traditional open weave PVC padding. While more cost effective, these overseas pads can often outgas and may contain potentially toxic chemicals and plasticizers such as phthalates and formaldehyde. Both bad for the environment and bad for your floors, out-gassing from inferior padding can react with certain floor finishes to leave them permanently stained and discolored. Anchor grip 30 is manufactured in the USA using only 100% felt and rubber materials.
Anchor grip 30 rug pads provide the ultimate support system for your oriental, Persian, or area rug. Anchor- grip 30 is 100% felt and rubber rug pad designed for keeping rugs anchored to the floor while providing comfort and cushioning under your rugs. We offer a signature patterned natural rubber backing, which combines a full 10oz/sq. Yd. Of rubber with a reinforced 5oz/sq. Yard rubber face to prevent fraying, flaking, and premature wear. Our signature patterned backing is combined with a 3/8'' (30 ounce) layer of felt to help support and cushion your area rugs. This dense fiber core helps prolong the life of your area rugs by reducing wear and tear from daily use. This added layer of felt protection also provides insulation, noise reduction, and acoustical benefits. Anchor- grip 30 works well with all types of rugs, but especially with thinner flat woven rugs such as kilimns, dhurrie, and soumac rugs. Anchor- grip 30 is manufactured with 100% felt & rubber and contains no glues or adhesives that can outgas, offering a more natural & rug pad alternative to traditional plastic, vinyl, and PVC rug pads. Our felt is heat pressed to the rubber, not glued, for added durability. As the cost of rubber increases, Manufacturers have been using more "classy fillers" in their rug pads to reduce costs. The more classy fillers are used, the faster the rubber backing will fall apart and crumble. The alternative to most felt and rubber rug pads is traditional open weave PVC padding. While more cost effective, these overseas pads can often outgas and may contain potentially toxic chemicals and plasticizers such as phthalates and formaldehyde. Both bad for the environment and bad for your floors, out-gassing from inferior padding can react with certain floor finishes to leave them permanently stained and discolored. Anchor grip 30 is manufactured in the USA using only 100% felt and rubber materials.
Flexible Metal Hose Assembly, Hose Inside Dia. 3/8 in, Hose Length 18 in, Hose Tube Material 321 Stainless Steel, Hose Cover Material 304 Stainless Steel, Max. Working Pressure @ 70 F 1,558 psi, Temp. Range 32 Degrees to 850 Degrees F, Dynamic Min. Bend Radius (In.) 5 in, Hose Fitting A Material Carbon Steel, Hose Fitting B Material Carbon Steel, Hose Fitting A Type MNPT, Hose Fitting B Type MNPT, Hose Fitting A Size 3/8 in, Hose Fitting B Size 3/8 in
Rope Item General Utility Rope, Rope Sub-Category All Purpose, Rope Diameter 3/8 in, Rope Material Cotton, Rope Strand Count 3, Rope Length 600 ft, Working Load Limit 30 lb, Rope Core Strand Count 0, Rope Construction Twisted, Tensile Strength 300 lb, Rope Core No, White, Rope Type Static, Package Type Spool
Rope Item General Utility Rope, Rope Sub-Category All Purpose, Rope Diameter 3/8 in, Rope Material Nylon, Rope Strand Count 16, Rope Length 600 ft, Working Load Limit 450 lb, Rope Core Strand Count 8, Rope Construction Double Braid, Tensile Strength 4,520 lb, Rope Core Yes, White, Rope Type Static, Package Type Spool
Rope Item General Utility Rope, Rope Sub-Category All Purpose, Rope Diameter 3/8 in, Rope Material Nylon, Rope Strand Count 3, Rope Length 600 ft, Working Load Limit 379 lb, Rope Core Strand Count 0, Rope Construction Twisted, Tensile Strength 3,795 lb, Rope Core No, White, Package Type Reel
Rope Item General Utility Rope, Rope Sub-Category All Purpose, Rope Diameter 3/8 in, Rope Material Polypropylene, Rope Strand Count 8, Rope Length 500 ft, Working Load Limit 257 lb, Rope Core Strand Count 0, Rope Construction Hollow Braid, Tensile Strength 2,575 lb, Rope Core No, Black, Rope Type Static, Package Type Spool
Socket Head Cap Screw, Head Type Standard, System of Measurement Inch, Drive Type Socket, Drive Size 7/64 in, Material Nylon, Material Grade/Class Not Graded, Finish Plain, Thread Size #6-32, Minimum Thread Length 3/8 in, Fastener Length 3/8 in, Head Height 0.136 in, Head Diameter 0.226 in, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.3, Flange Diameter Not Applicable
Thumb Screw, Grip Style Knurled, Type Thumb Screw, Finish Plain, Material Nylon, Thread Size #8-32, Fastener Length 3/8 in, Thread Style Fully Threaded, Thread Length 3/8 in, Head Width 0.425 in, Head Height 0.305 in, Tensile Strength 99 psi, Head Type Knurled, Maximum Head Height 0.305 in, Minimum Head Height 0.305 in, System of Measurement Inch, Head Material Nylon, Head Shape Round, Package Quantity 10
Tygon LP 1100 Fuel Line, 1/4" (50 ft), Size: 1/4" ID x 3/8" OD, Notes 2: This fuel line shows superior resistance to fuels and industrial lubricants while resisting, Notes 2: hardening and swelling normally caused by hydrocarbon based fuels., Notes 3: This reduces the risk of cracking/leaking caused by "sour gas" which forms when unused gas is, Notes 3: returned to the fuel tank. Additionally, this line is specifically designed to withstand the, Notes 3: damaging effects of Ethanol., Notes 4: Temperature resistant up to 180?. Excellent kink resistance and bend radiance. Ozone and UV light, Notes 4: resistant. Yellow.