DisplayName: ['Pneumatic Accessories']

Products with this attribute (6453 total)

The cost effective and clean looking AC series allows you to pick a combination of modular style air preparation equipment that best suits your needs. The series, available in 8 size options to ensure optimum performance, offers energy savings, with higher flow rates. Simple assembly and maintenance reduces downtime.
The CRA1 rack and amp; pinion rotary actuator offers very high torque-to-size and accurate positioning. Bore sizes are 30, 50, 63, 80 and 100mm. Units may be ordered auto-switch capable and with cushions. Dimensions range from 3" X 4" X 2" to a maximum of 8" X 9.65" X 4.41". Single shaft end or double shaft end models are available.
The EX510 series makes it possible to connect more valves and sensors than with conventional units. With the introduction of the EX510 series, only a power supply cable to the GW unit is required, resulting in wire-savings. Setting the address for the SI unit, output unit and input unit is no longer required, only the address for the GW unit needs to be set. The volume ratio of the EX510 SI unit is 60% more compact than the EX120.
The EX510 series makes it possible to connect more valves and sensors than with conventional units. With the introduction of the EX510 series, only a power supply cable to the GW unit is required, resulting in wire-savings. Setting the address for the SI unit, output unit and input unit is no longer required, only the address for the GW unit needs to be set. The volume ratio of the EX510 SI unit is 60% more compact than the EX120.
The MY2 high precision guide cylinder is available in bore sizes 16mm, 25mm and 40mm. This series has been designed with a high precision single or double axis guide to create a compact, low profile cylinder. Maintenance has been simplified by allowing the cylinder to be detached without disturbing the guide unit and work piece.
The NCG provides precision mounting, short overall length, and high speed. Rubber bumpers are standard and an optional adjustable air cushion is available. Nine mounting styles include basic body, foot, single clevis, front or rear flange, front or rear trunnion, nose mount, and double clevis. Bore sizes range from 3/4in. to 2 1/2in. and standard stroke lengths from 1in. to 12in.. The NCG series is auto-switch capable. Non-rotating and double rod are standard options.
The NCRB single vane, double shaft style rotary actuator is available in 7 sizes (10-30mm). Rotation angles of up to 270 is possible for the entire series. The NCRB series offers smooth, step-free operation and long life expectancies in rugged service applications. Optional auto switches are available.
The NRB shock absorber has a specially designed orifice that compensates for varying speeds and loads to consistently decelerate loads without requiring additional adjustment. The double seal enclosure consisting of a scraper and a rod seal, provides extra insurance against leakage. The NRB series shock absorbers are available in six sizes and all withstand an impact speed of 16 ft/sec.
The NZX is a single-stage vacuum generator. The modular design allows the user to choose only the components needed for the application. The ZX is available with a combination of generator unit, supply/release valve unit, pressure switch unit, and suction filter unit. Order without the generator unit for use as a filter and valve assembly for house vacuum systems. Special function plates allow the use of shop air to create the vacuum, and nitrogen for the blow-off. NZX is available in standalone or manifold configurations.
The RSQ series is a fixed-height stopper cylinder with proven endurance and low breakaway characteristics. The RSG series is an adjustable mounting height stopper cylinder. It can be raised or lowered according to the distance required to stop the work piece. The RSH heavy-duty stopper cylinder is specially designed for use on conveyor lines or other applications requiring an external stopping device.
The SV series employs a multi-connector instead of the conventional lead wires for internal manifold wiring. By connecting each block with a connector, changes to manifold stations are greatly simplified. Cassette base type manifolds offer the ultimate in flexibility. Manifold sections can be added using a simple release mechanism. Conventional tie-rod base type manifolds are also available. The use of 34 pin connectors allows up to 16 stations with double solenoids.
The SV series employs a multi-connector instead of the conventional lead wires for internal manifold wiring. By connecting each block with a connector, changes to manifold stations are greatly simplified. Cassette base type manifolds offer the ultimate in flexibility. Manifold sections can be added using a simple release mechanism. Conventional tie-rod base type manifolds are also available. The use of 34 pin connectors allows up to 16 stations with double solenoids.
The SV series employs a multi-connector instead of the conventional lead wires for internal manifold wiring. By connecting each block with a connector, changes to manifold stations are greatly simplified. Cassette base type manifolds offer the ultimate in flexibility. Manifold sections can be added using a simple release mechanism. Conventional tie-rod base type manifolds are also available. The use of 34 pin connectors allows up to 16 stations with double solenoids.
The SX series unique design combines both solenoid assemblies (when using double solenoid 2/3 position) on the same side of the valve, opposite the ports, allowing for greater space savings and simplified wiring access. The SX series valves are available with numerous manifold options which allow for easier installation and improved operation.
The SX series unique design combines both solenoid assemblies (when using double solenoid 2/3 position) on the same side of the valve, opposite the ports, allowing for greater space savings and simplified wiring access. The SX series valves are available with numerous manifold options which allow for easier installation and improved operation.
The SX series unique design combines both solenoid assemblies (when using double solenoid 2/3 position) on the same side of the valve, opposite the ports, allowing for greater space savings and simplified wiring access. The SX series valves are available with numerous manifold options which allow for easier installation and improved operation.
The SYJ Valve is an innovative combination of space efficiency and performance superiority which provides real value to the design solution. Whether designed in a manifold or used as a single valve, this small profile increases design flexibility and minimizes space requirements. The SYJ valve utilizes a low power (0.5 watts standard) pilot solenoid design, which dramatically reduces thermal heat generation. This improves performance, decreases operating costs, and allows for direct control by PLC output relays. All electrical connections for SYJ Valves are available with lights and surge suppression. SYJ series valves can be configured on base mounted manifolds, or individually on sub-plates, creating a variety of solutions to meet your broadest engineering needs.
The VM series is a mechanical, poppet valve. Their compact size requires little mounting space. The VM series offers a wide variety of actuator styles and flow capacity up to 1.0 Cv.
The VM series is a mechanical, poppet valve. Their compact size requires little mounting space. The VM series offers a wide variety of actuator styles and flow capacity up to 1.0 Cv.
The VM series is a mechanical, poppet valve. Their compact size requires little mounting space. The VM series offers a wide variety of actuator styles and flow capacity up to 1.0 Cv.
The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.
The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.
The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.
The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.
The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.
The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.
The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.
The VQC series has five standard wiring packages bringing a world of ease to wiring and maintenance work, while the protective enclosures of three of them conform to IP67 standards for protection from dust and moisture. The use of multi-pin connectors to replace wiring inside manifold blocks provides flexibility when adding stations or changing manifold configuration. The VQC series has outstanding response times and long life.
The VZ series consists of 4 and 5 port solenoid valves with rubber seal. Base mounted and body ported valves are available with standard, flat cable, DIN rail mounted plug-in and non plug-in manifolds. Various options are available. The VZ series is still available although direct replacements for each series have been implemented. See individual series information for replacements.
The VZ series consists of 4 and 5 port solenoid valves with rubber seal. Base mounted and body ported valves are available with standard, flat cable, DIN rail mounted plug-in and non plug-in manifolds. Various options are available. The VZ series is still available although direct replacements for each series have been implemented. See individual series information for replacements.
The VZ series consists of 4 and 5 port solenoid valves with rubber seal. Base mounted and body ported valves are available with standard, flat cable, DIN rail mounted plug-in and non plug-in manifolds. Various options are available. The VZ series is still available although direct replacements for each series have been implemented. See individual series information for replacements.
The VZ series consists of 4 and 5 port solenoid valves with rubber seal. Base mounted and body ported valves are available with standard, flat cable, DIN rail mounted plug-in and non plug-in manifolds. Various options are available. The VZ series is still available although direct replacements for each series have been implemented. See individual series information for replacements.
The ZCUK series is a non-rotating free mount cylinder for vacuum applications. The ZCUK was created by providing a vacuum passage in the rod of the CUK cylinder to enable a vacuum pad to be installed on the end of the rod. A guide is provided as standard equipment. Vacuum pads are available with pad diameters of 2 to 50. Cap or rod piping is available to the rod side. Series ZCUK is available in 5 bore diameters.
The ZPR series static conductive suction cups are used in applications where the workpiece is sensitive to damage from static electricity discharge, such as electronics.
The ZPR series static conductive suction cups are used in applications where the workpiece is sensitive to damage from static electricity discharge, such as electronics.
The ZPY series static conductive suction cups are used in applications where the workpiece is sensitive to damage from static electricity discharge, such as electronics.
TI2V07BU-1000F-305
TI2V07R-1000F-305
TI2V11BU-500F-153
TI2V11G-500F-153
TIA01G-20
TIA01W-305 SMC | SMC TIA01W-305- CBT Company Industrial Parts & Solutions. CBT Company
TIA01Y-33 SMC | SMC TIA01Y-33- CBT Company Industrial Parts & Solutions. CBT Company
TIA05BU-33 SMC | SMC TIA05BU-33- CBT Company Industrial Parts & Solutions. CBT Company
TIA05W-33 SMC | SMC TIA05W-33- CBT Company Industrial Parts & Solutions. CBT Company
TIA07R-153 SMC | SMC TIA07R-153- CBT Company Industrial Parts & Solutions. CBT Company
TIA07Y-100-X3 | Tubing - Nylon, T/TIA Series | SMC | MISUMI
TIA11BU-153 SMC | SMC TIA11BU-153- CBT Company Industrial Parts & Solutions. CBT Company
TIA13W-305 SMC | SMC TIA13W-305- CBT Company Industrial Parts & Solutions. CBT Company
TIL01-16-X48
TIUB, Inch Size Polyurethane Tubing
TIUB, Inch Size Polyurethane Tubing
TIUB, Inch Size Polyurethane Tubing
TIUB, Inch Size Polyurethane Tubing
TIUB, Inch Size Polyurethane Tubing
TIUB, Inch Size Polyurethane Tubing
TIUB, Inch Size Polyurethane Tubing
TIUB01BU-100U0251
TIUB01G-153 SMC | SMC TIUB01G-153- CBT Company Industrial Parts & Solutions. CBT Company
TIUB01S1-33
TIUB05G-153 SMC | SMC TIUB05G-153- CBT Company Industrial Parts & Solutions. CBT Company
TIUB05R-20 SMC | SMC TIUB05R-20- CBT Company Industrial Parts & Solutions. CBT Company
TIUB07C-305 SMC | SMC TIUB07C-305- CBT Company Industrial Parts & Solutions. CBT Company
TIUB11BU1-153-X108
TIUB11BU1-20 SMC | SMC TIUB11BU1-20- CBT Company Industrial Parts & Solutions. CBT Company
TIUB11G-153 SMC | SMC TIUB11G-153- CBT Company Industrial Parts & Solutions. CBT Company
TIUB11G2-153-X108
TIUB11Y-305 SMC | SMC TIUB11Y-305- CBT Company Industrial Parts & Solutions. CBT Company
TIUB13GR1-153-X108
TIUB13Y-153
TIV, D.O.T Tubing
TIV, D.O.T Tubing
TPH0425W-100 SMC | SMC TPH0425W-100- CBT Company Industrial Parts & Solutions. CBT Company
TRB, Double Layer Tubing
TRB1209BU-100 SMC | SMC TRB1209BU-100- CBT Company Industrial Parts & Solutions. CBT Company
TRB1209G-100 SMC | SMC TRB1209G-100- CBT Company Industrial Parts & Solutions. CBT Company
TRB1209W-20 SMC | SMC TRB1209W-20- CBT Company Industrial Parts & Solutions. CBT Company
TRBU, Flame Resistant Double Layer Polyurethane Tubing
TRBU, Flame Resistant Double Layer Polyurethane Tubing
TRBU0805BU-20 SMC | SMC TRBU0805BU-20- CBT Company Industrial Parts & Solutions. CBT Company
TRBU1065G-100 | Tubing - Polyurethane, Double Layer, Flame-Retardant, UL-94 Standard V-0, TRBU Series | SMC | MISUMI
TRS, Soft Nylon Tubing
TRS0603B-100 SMC | SMC TRS0603B-100- CBT Company Industrial Parts & Solutions. CBT Company
TRS0603W-20 SMC | SMC TRS0603W-20- CBT Company Industrial Parts & Solutions. CBT Company
TRS0805R-100 SMC | SMC TRS0805R-100- CBT Company Industrial Parts & Solutions. CBT Company
TRS1208B-20 SMC | SMC TRS1208B-20- CBT Company Industrial Parts & Solutions. CBT Company
TRS1208G-100 SMC | SMC TRS1208G-100- CBT Company Industrial Parts & Solutions. CBT Company
TRTU0805R-20 | Tubing - Polyurethane, Triple Layer, Flame-Resistant, UL-94 Standard V-0, TRTU Series | SMC | MISUMI
TS0425Y-20 SMC | SMC TS0425Y-20- CBT Company Industrial Parts & Solutions. CBT Company
TS1612BU-20-X4
TS1612W-100 | Tubing - Nylon, Soft, TS/TISA Series | SMC | MISUMI
TU, Polyurethane Tubing, Metric Size
TU, Polyurethane Tubing, Metric Size
TU, Polyurethane Tubing, Metric Size
TU, Polyurethane Tubing, Metric Size
TU, Polyurethane Tubing, Metric Size
TU0425BU2-153-X108
TU0425W-153 SMC | SMC TU0425W-153- CBT Company Industrial Parts & Solutions. CBT Company
TU0604BU3-153-X101US
TU0604W-100-X108