DisplayName: ['Rain Covers']

Products with this attribute (15 total)

Camera BodyArmor for Panasonic broadcast cameras is a custom-fit, padded, protective cover made using a water-resistant, highly abrasive-resistant, soft-feel fabric. Camera BodyArmor protects your camcorder from bumps, hits and scratches. It also reduces the risk of camcorder damage due to precipitation, dust, and other harsh conditions. The back end is expandable to accommodate various sized batteries and wireless microphone combinations. All CBAs for broadcast cameras include a reversible, pull-out Rain Top that's white (reflective) on one side for shooting in the hot sun and black on the other side for cold shoots and rain. The padded interior of the CBA is lined with breathable Leno Mesh to maximize airflow between the cover and camera.</p><p>The Camera Body Armor Camera Case might be thought of as a Shoulder Case with a very soft feel to it and a reversible Rain/Dust Top. The soft feel against the face is appreciated by the camera operator. The reversible top is white (reflective) on one side for hot, dry, sunny situations while the black side is useful to absorb the sun`s warmth under cold conditions. The Camera Body Armor has the same attention to details the traditional Shoulder Case enjoyed by camera owners for the past 20 years.</p>

Now you can protect your DSLR camera from rain, dust and sea spray. Our new DSLR Rain Slickers use the same triple-layer nylon material with waterproof coating that our compact HD Rains Slickers do. Designed specifically for DSLR cameras,</p><p>The All-New DSLR Rain Slicker has sleeves with elastic openings on either side of the case provide full access to camera controls while keeping your camera and hands dry. There's a double-layer Velcro-sealed access panel along the top of the case for attaching flashes and lights and clear vinyl windows provide easy viewing of display screens and lens points.</p>

The camRade <b>wetSuit ARRI ALEXA Mini</b> is a rain cover that protects your ARRI ALEXA Mini camera against the elements. It is made of water-resistant fabric with a soft lining and minimalizes unwanted sound effects during operation.</p><p>It also reduces the chance of the camera overheating by allowing hot air to escape via vents and openings.</p><p>Due to many smart openings the DoP can use the cover around the desired configuration of the camera.</p><p>The wetSuit is supplied with clear protection covers for a normal and a long lens, making sure that any lens you might use will be well protected. When the lens is shorter than the cover this can be folded back to the correct size. The viewfinder monitor is completely closed off by the fabric and vinyl window, so no water will come into the suit during use. The vinyl window on the viewfinder cover can be opened to use the LCD screen.</p><p>The cover has clear vinyl windows which can be opened and closed with hook and loop fasteners, for maximum visibility when adjusting the menu, audio input select level and other controls.</p><p>This item will be delivered to you in a waterproof pouch with zipper, which you can use for storage and transportation of the cover when not in active use.</p>

The camRade <b>wetSuit DSLR</b> is a rain cover designed for a wide range of DSLR cameras. Made of a special fabric with a soft lining it protects your camera against bad weather conditions.</p><p>A large part of the cover is made of transparent vinyl and allows full view of the controls and lens settings. Two access points with soft fabric sleeves allow you to hold and operate your camera. These sleeves and the sleeve over the lens can be tightened with elastic cord to close the cover firmly around the camera.</p><p>On top of the cover a flap with hook and loop fasteners is added to place your flash light. A separate protective cover with vinyl windows for your flash light is also supplied in the package.</p><p>This item is supplied in a waterproof pouch with zipper, which you can use for storage and transportation of the cover when not in active use.</p>

The camRade <b>wetSuit EFP Large</b> is a very strong rain cover designed for a wide range of outside broadcasting cameras using a large lens adaptor, viewfinder and viewfinder sun hood. The discrete grey fabric with soft lining minimalizes unwanted sound effects caused by wind and rain during operation and helps the camera not to stand out in a crowd.</p><p>The cover is perfect for use during both indoor and outdoor events such as sports, music, etc. The monitor and controls are protected by vinyl windows for easy view and the hand controls are fully accessible. The one-piece wetsuit closes with only hook and loop fasteners which helps to get the cover over the set-up very quickly and ensures a good seal with the camera.</p><p>This item is supplied in a water-resistant pouch with zipper, which you can use for storage and transportation of the cover when not in active use.</p><p>This cover is available in <b>Black</b> and Grey.</p>

The camRade wetSuit HC-X1000 is a black soft flexible waterproof rain cover that protects your camera against the elements. It also covers the viewfinder, microphone and other accessories. The rain cover is designed specifically for the Panasonic HC-X1000 camcorder. The near silent fabric minimalizes unwanted sound effects caused by wind and rain and reduces the chance of the camera overheating by allowing hot air to escape via the breathing material which the cover is made of. The wetSuit has clear vinyl windows for visibility when adjusting the menu, audio input select level or other controls. The viewfinder monitor is completely closed off by the fabric and vinyl window, so no water will come into the suit during use. This item will be delivered to you in a waterproof pouch with zipper, which you can use for storing and transportation of the cover when not in active use.</p>

The rain cover is designed specifically for the Sony PXWFS7 camera. The near silent fabric minimalizes unwanted sound effects caused by wind and rain and reduces the chance of the camera overheating by allowing hot air to escape via the breathing material which the cover is made of. The wetSuit has clear vinyl windows for visibility when adjusting the menu, audio input select level and other controls. The viewfinder monitor is completely closed off by the fabric and vinyl window, so no water will come into the suit during use. The suit also covers the lens, Ergonomic Handgrip and offers room for the XDCA-FS7 extension on the back of the camera. This item will be delivered to you in a waterproof pouch with zipper, which you can use for storing and transportation of the cover when not in active use.</p>