extraData: {'atoms': 1}

Products with this attribute (6438 total)

Technical Specification Item Acme Screw Screw Dia. 0.625 Lead 0.2 Number of Starts 1 Length 36 Material Steel For Use With Flange 5JDK5 This listing is for each.

Technical Specification Item Air Filter Element Air Filter Type - Automotive Engine Air Filter Air Filter Design Element Only, Round Element Only - Automotive Filters Yes Height 26-1/2' Width 13-13/16' Length 26-1/2' Outside Dia. 13-13/16' Description/Special Features Air Element Includes Attached Gasket This listing is for each.

Technical Specification Item Air Filter Element Air Filter Type - Automotive Engine Outer Air Filter Air Filter Design Element Only, Round Element Only - Automotive Filters Yes Height 16-1/2' Width 10-1/32' Length 16-1/2' Outside Dia. 10-1/32' Description/Special Features Outer Air Filter Element Includes 10-7/8' Lid, Attached Gasket, Wing Nut This listing is for each.

Technical Specification Item Air Filter Element Air Filter Type - Automotive Engine Outer Air Filter Air Filter Design Element Only, Round Element Only - Automotive Filters Yes Height 16-1/2' Width 9-7/32' Length 16-1/2' Outside Dia. 9-7/32' Description/Special Features Outer Air Filter Element Includes Attached, G103-N Included This listing is for each.

Technical Specification Item Attachment Link Roller Chain Link Item Attachment Link Roller Chain Link Type SK-1 Industry Chain Size 60 Chain Link Material 600 Stainless Steel Number of Strands Single Industry Chain Pitch 3/4 Chain Link Overall Width 1.087 Chain Roller Dia. 0.469 Width Between Roller Link Plates 0.5 Roller Link Plate Height 0.713 Connecting End to Center Line 0.581 Rivet End to Center Line 0.506 Pin Length 1.087 Inside Pin Dia. 0.234 Outside Pin Dia. 0.234 Pin Link Plate Thickness 0.094 Pin Type Riveted Max. Allowable Load 346 lb. Lubrication SAE 10 to SAE 50 Temp. Range -40 to 750F Agency Compliance American National Standards Institute (ANSI) This listing is for pkg. of 5.

Technical Specification Item Ball End Mill Length of Cut 10mm Overall Length 83mm Shank Dia. 12mm Neck Length 83mm Helix Angle 30 Degrees Number of Flutes 2 Cutting Direction Right Hand End Mill Application Finishing End Mill Style Ball Nose Single End/Double End Single End Material Grade - Machining High Performance This listing is for each.

Technical Specification Item Belt Barrier Post Height 16-1/2 Post Dia. 2 Number of Belts 2 Belt Length 13 ft. Belt Color Yellow with Black Text Belt Message Danger - Keep Out Belt Width 2 Includes Mfr. No. 898CLIP Indoor / Outdoor Indoor ADA Compliance No This listing is for each.

Technical Specification Item Cabinet Shelf Width 18-9/16 Length 38 Material Steel Color Dove Gray For Use With Tilt-Bin Cabinets Includes (1) Extra Shelf Green Environmental Attribute Product Contains a Minimum of 30% Post-Consumer Recycled Content Green Certification or Other Recognition GREENGUARD(R) GOLD Certified Compliance and Restrictions This item is restricted for international sale. - This item has been designated by the manufacturer as an environmentally preferable product (EPP) because this item is GREENGUARD(R) GOLD Certified. This listing is for each.

Technical Specification Item Collet Chuck Dimension Type V-Flange Taper Size CAT50 Collet Series ER32 Min. Collet Capacity 0.043 Max. Collet Capacity 0.827 Projection 4 Nut Dia. 1.97 Runout Yes Spindle Yes Balanceable Yes Pre-Balanced Yes Coolant Fed Coolant Through Material Steel For Use With 04616 This listing is for each.

Technical Specification Item Cradle Grab Hook Material Alloy Steel Grade 100 Hook Attachment Type Clevis Trade Size 1/2 Working Load Limit 15, 000 lb. Hook Opening 23/32 Hook Reach Length 4-1/4 Clevis Pin Diameter 5/8 Clevis Inside Width 5/8 Color Green Finish Powder Coated For Use With Grade 80 or 100 Chain Standards ASME B30.9, , ASTM A952 Compliance and Restrictions This item is restricted for international sale. This listing is for each.

Technical Specification Item Definite Purpose Magnetic Motor Starter Number of Poles 3 Amps AC 50 Coil Volts 480VAC Enclosure NEMA Rating 1 HP @ 1 Phase - 120V 3 HP @ 1 Phase - 240V 10 HP @ 3 Phase - 240V 15 HP @ 3 Phase - 480V 30 Action Nonreversing Hz 50/60 HP @ 3 Phase - 575V 30 Height 10 Width 6 Depth 5.56 Standards UL File E3190 CCN NLDX2/ CSA Includes Melting Alloy Overload Block and Trip-Free Reset Mechanism This listing is for each. Product Specification Amperage Rating 50A Brand DPS Catalog Description Square D, STARTER MOTOR CONTROL 1000VAC, 3, 3-Phase, 3HP@115VAC - 10HP@230VAC 15HP@230VAC - 30HP@460/575VAC, 3P, 480VAC@60Hz - 440VAC@50Hz, 50A, 600VAC, DPS, Definite Purpose Starter, General Purpose (Indoor), NEMA 1, Thermal - Melting Alloy Enclosure NEMA 1 Environmental Conditions GENERAL PURPOSE (INDOOR) 00785901025092 Height 7.4000 Height Unit IN Item Status A Length 13.5000 Length UOM IN Mfr. # 8911DPSG53V06 Motor Power 3HP@115VAC - 10HP@230VAC 15HP@230VAC - 30HP@460/575VAC Number Of Poles 3 Phase 3-PHASE Power Supply 480VAC@60HZ - 440VAC@50HZ Reset Type THERMAL - MELTING ALLOY Size 3 Sub-Brand DPS Type DEFINITE PURPOSE STARTER Voltage Rating 600 Width 8.7000 Width UOM IN

Technical Specification Item End Mill Holder Dimension Type V-Flange Taper Size CAT50 Bore Dia. 1 Projection 4 Nose Dia. 2 Coolant Fed Coolant Through Pre-Balanced Yes This listing is for each.

Technical Specification Item Flanged Bearing Inside Dia. 1/2 Outside Dia. 3/4 Length 1/2 Flange Dia. (In.) 1 Flange Dia. (mm) 25 Flange Thickness (In.) 1/8 Flange Thickness (mm) 3.2 Max. Pv 20, 000 Temp. Range (F) 500 Degrees Lubrication None Material C96900 Cast Bronze, ToughMet 3 Color Silver Number of Pieces 1 This listing is for each.

Technical Specification Item Flanged Sleeve Bearing Inside Dia. 20mm Outside Dia. 24mm Length 12mm Flange Dia. (mm) 28 Flange Thickness (mm) 2 Max. Pv 75000 Temp. Range (F) -40 to 500 Material C93200 Cast Bronze (SAE660) Color Bronze Compliance and Restrictions This listing is for pkg. of 5.

Technical Specification Item Fuel Filter Filter Design Spin-On Description/Special Features Diesel Fuel/Water Separator with Water Sensor Warning Light Kit Height 47' Width 28-1/2' Includes Water Sensor Warning Light Kit and 220V Electrical Connector (For Overseas Operation) This listing is for each. This item requires special shipping, additional charges may apply.

Technical Specification Item Grooving Tool Style Retaining Ring Material Solid Carbide Overall Length 2-1/2 Shank Dia. 1/4 Bore Dia. 0.250 Groove Width 0.0175 Max. Cutting Depth 0.250 Offset 0.060 Cutting Angle 2 Degrees Finish TiAlN Cutting Direction Right Hand Grade C2 Application For Machining Undercuts Or Recesses On The OD, ID And Faces Of Parts In High-Temp Alloys, Steels, Stainless Steels And Cast Irons This listing is for each.

Technical Specification Item Grooving Tool Style Retaining Ring Material Solid Carbide Overall Length 2-1/2 Shank Dia. 3/8 Bore Dia. 0.375 Groove Width 0.088 Max. Cutting Depth 0.500 Offset 0.110 Cutting Angle 2 Degrees Finish Uncoated Cutting Direction Right Hand Grade C2 Application For Machining Undercuts Or Recesses On The OD, ID And Faces Of Parts In Aluminum, Copper, Brass And Plastic This listing is for each.

Technical Specification Item Guard Rail Kit Load Capacity 1000 lb. Overall Length 6 ft. Overall Width 1 Overall Height 42 This listing is for each.

Technical Specification Item Hydraulic Filter Fluid Type Hydraulic Filter Design Spin-On Thread Size - Automotive Filters 1-1/2' Length 7-15/32' Outside Dia. 4-13/16' Micron Rating 8 Description/Special Features Maximum Performance Glass Hydraulic Spin-on Height 7-15/32' Width 4-13/16' Includes I. Gasket This listing is for each.

Technical Specification Item IEC Magnetic Contactor Full Load Amps-Inductive 115 Full Load Amps-Resistive 200 Number of Poles 4 Coil Volts 480VAC Reversing No HP @ 1 Phase - 240V 40 HP @ 3 Phase - 208V 40 HP @ 3 Phase - 240V 50 HP @ 3 Phase - 480V 100 HP @ 3 Phase - 575V 125 Enclosure NEMA Rating No Enclosure Hz 50/60 Height 4.83 Width 4.83 Depth 6.3 Standards UL/CE/CSA/CCC/ATEX/IEC EN 60947 Frame / Series / Class / Code Frame G Compliance and Restrictions This item is restricted for international sale. This listing is for each.

Technical Specification Item Indexable Milling Cutter Number of Inserts Required 1 Insert Screw FS390 Torx15 This listing is for each.

Technical Specification Item Indexable Milling Cutter Number of Inserts Required 2 Insert Screw FS1005 Torx 8 This listing is for each.

Technical Specification Item Indexable Milling Cutter Number of Inserts Required 3 Insert Screw FS359 Torx 15 This listing is for each.

Technical Specification Item Jobber Drill Bit Drill Bit Size 10.1mm Decimal Equivalent 0.3976 Measurement System Metric Drill Bit Point Angle 140 Degrees Coolant Fed Coolant Through Flute Length 71mm Maximum Drilling Depth 71mm Cutting Direction Right Hand Shank Dia. 12mm Overall Length 118mm Depth:Dia. Ratio 5xD Drill Bit Grouping Set Standards DIN 6537 L / DIN6535 HA This listing is for each.

Technical Specification Item Linear Pillow Block Bearing Type Open, Twin Bore Dia. (In.) 0.5 Overall Width (In.) 2 Overall Length (In.) 3.5 Overall Height (In.) 1.13 Body Width (In.) 1.38 Mounting Surface to Shaft Center (In.) 0.687 Mounting Hole Center (In.) 2.5 Mounting Hole Dia. (In.) #6 Dynamic Load Capacity (Lb.) 460 Material Aluminum Alloy Color Silver For Use With Thomson Shaftng Compliance and Restrictions This item is restricted for international sale. This listing is for each.

Technical Specification Item Machine Screw Actuator Rated Load (Lb.) 60.6% Lifting Screw Dia. (In.) 25 Travel (In.) 3 Turns of Worm for 1 In. Raise 25 Full Load Torque (In.-Lbs.) 1/2 Max. HP 1/2 Efficiency Rating 0.75 Gear Ratio 5:1 Housing Material Aluminum Finish Painted Mounting Type Top Plate This listing is for each.

Technical Specification Item Motor Management System with Keypad Interface Optional Operating Voltage 600VAC Current Range 5 to 90A Control Voltage 600VAC Depth 6 Height 5 Width 5 For Use With IEC and NEMA Contactors and Starters Standards UL, CSA, CE, NEMA, IEC Compliance and Restrictions This item is restricted for international sale. This listing is for each.

Technical Specification Item NEMA Magnetic Motor Starter Overload Relay Amp Setting 50 to 200A Coil Volts 208VAC Enclosure NEMA Rating 1 Auxiliary Contact Form 1NO HP @ 3 Phase - 240V 50 HP @ 3 Phase - 480V 100 Starter Type NEMA Style Action Nonreversing Hz 60 Number of Poles 3 Amps AC 135 NEMA Size 4 Width 13.38 HP @ 3 Phase - 575V 100 HP @ 3 Phase - 208V 40 Height 24.88 Depth 8.13 Standards UL, CSA Compliance and Restrictions This item is restricted for international sale. WARNING Reproductive Harm - This listing is for each.

Technical Specification Item Pan Carrier Number of Compartments 1 External Dimensions W x D x H 26-1/4 x 18 x 25 Internal Cabinet Dimensions W x D x H 21 x 13-1/8 x 19-1/8 Compartment Dimensions W x D x H 21 x 13-1/8 x 19-1/8 Holding Capacity (6) 2-1/2 Deep, (4) 4 Deep, (2) 8 Deep Pan Size (In./cm) 2-1/2, 4, 6, 8 Color Speckled Gray Material Polyethylene/Foam Insulation For Use With Food Pans Includes (1) Each UPCS400 Package Quantity 1 This listing is for each.

Technical Specification Item Pipe Stanchion Rp 1-1/4 For Use With Mfr. Model Number SE-420, SE-491, SE-491-CV, SE-545, SE-583, SE-584 Fits Brand Speakman Compliance and Restrictions This item is restricted for international sale. This listing is for each.

Technical Specification Item Plunger Type Hand Retractable With Out lock Material Steel Spring Stainless Steel Finish Zinc Plated Clear Chromate Body Width (In.) 0.25 Body Length (In.) 1.13 Thread Size 3/8-16 End Force Initial (Lb.) 0.025 End Force Final (Lb.) 1.25 Force 0.25 Initial, 10.25 Final Function Fully Retractable Plunger, And Designed For Applications With Limited Space Plunger Dia. (In.) 0.25 Plunger Travel (In.) 0.3 This listing is for pkg. of 2.

Technical Specification Item Replacement Coil Contactor Type NEMA Starter Size 00 Coil Volts 24VAC For Use With SA Series B Hz 60 VA Rating 165 This listing is for each. Product Specification Application REPLACEMENT COIL Brand Square D Catalog Description Square D, CONTACTOR+STARTER+RELAY COIL 24VAC NEMA, 24VAC, Contactor+Starter Coil, Direct, NEMA, Replacement Coil, Screw Clamp Coil Voltage 24@50/60Hz Connection SCREW CLAMP 00785901771241 Height 2.1000 Height Unit IN Item Status A Length 3.3000 Length UOM IN Mfr. # 9998SAC23 Mounting DIRECT Size 00, 54.7 MM, 56.2 MM, 81.5 MM Special Features B Standard NEMA Type COIL Width 2.8000 Width UOM IN

Technical Specification Item Replacement Handle For Use With Mfr. Model Number CL0400, CL1000, CL1500 Fits Brand Mag-Mate Includes Installation instructions Compliance and Restrictions This item is restricted for international sale. This listing is for each.

Technical Specification Item Sample Vial Vial Style Chromatography Labware Capacity - English 0.54 dram Labware Capacity - Metric 2mL Labware Height - English 1.26' Labware Height - Metric 32mm Labware Inside Dia. - English 0.47' Labware Inside Dia. - Metric 12mm Includes Closure No Labware Basic Material Glass Labware Body Material Type I Borosilicate Glass Labware Clarity Colored Autoclavable Yes Sterile/Non-Sterile Non-Sterile This listing is for pkg. of 1, 000.

Technical Specification Item Screw Machine Drill Bit Drill Bit Size 11.25mm Decimal Equivalent 0.4429 Drill Bit Point Angle 140 Degrees Flute Length 55mm Cutting Direction Right Hand Shank Dia. 12mm Overall Length 102mm Depth:Dia. Ratio 3xD Coolant Fed Coolant Through Drill Bit Grouping Set Standards DIN 6537 K / DIN 6535 HA This listing is for each.

Technical Specification Item Solenoid Air Control Valve Valve Ways and Positions 5-Way/2-Position Voltage 24VDC Valve Actuator / Return Solenoid / Solenoid Max. CFM - Valves 3.00 Operational Pressure Range 15 to 100 psi Body Style Body Ported Pilot Pressure 15 Coefficient of Volume 1 Electrical Connections Non Plug-In Shifting Technology Solenoid Power Consumption 0.4W Ambient Temp. Range 14 Degrees to 122 Degrees F Overall Height 3/4 Overall Length 4 Overall Width 1-1/2 Standards CE Pneumatic Valves Product Group Solenoid Air Control Valve This listing is for each. _DELETE_

Technical Specification Item Temperature Transducer Temp. Range 0 to 300 Degrees F Process Connection 1/4 NPT Power Required 18 to 32VDC Response Time 0.33 sec. Mounting 1/4 NPT Output 4 to 20mA Temp. Accuracy +/- 0.54 Degrees F + (0.1% of measuring scale) Probe Length 3-15/16 Probe Dia. 15/64 Electrical Connections M12 Connector Standards cULus Manufacturers Warranty Length 5 yr. This listing is for each.

Technical Specification Item Thread Mill End Mill Material Carbide End Mill Cutting Type Center This listing is for each.

Technical Specification Item Thread Mill Type Extra Long Reach, Helical Flute, Internal Threads Thread Size 5/16-24 Pitch 24 TPI Cutting Dia. 0.238 End Mill Material Carbide Flutes 3 Length of Cut 0.8500 Overall Length 2-1/2 Finish TiAlN Shank Dia. 1/4 Thread Type UN Application For Use On Titanium, Nickel-Based Alloys, Cast Iron, Stainless Steel And Steel Cutter Dia. - Machining 0.2380 Drilling Tool Configuration Individual List Number TMLR Material - Machining Carbide Material Applications Cast Iron, Nickel, Stainless Steel, Steel, Titanium Measurement System Decimal Inch Number of Flutes 3 Material Solid Carbide This listing is for each.

Technical Specification Item Urn Top Rope Post Height 37 Base Dia. 12 Post Finish Polished Chrome Base Material Polished Chrome Base Type Flat Post Dia. 2 For Use With Portable Posts Mfr. No. 840BK72HE-PS1, 840BL72HE-PS1, 840RD72HE-PS1, 842BK72SE-PC, 843BK72SE-PC, 843RD72SE-PC, WP-PC ADA Compliance No This listing is for each.

Technical Specification Item Valve, 1, 2.4-12 gpm Compliance and Restrictions This item is restricted for international sale. This listing is for each.

Technical Specification Item Y Strainer Pipe Size 10 Connection Type Flanged Housing Material Cast Iron Max. Pressure 200 psi @ 150 Degrees F WOG, 125 psi @ 450 Degrees F WSP Length 25-3/4 Screen Material 304 Stainless Steel Mesh 1/8 Gasket Material Fiber Blow-off Port 2 Class 125 Standards ASME B16.1, ASTM A 126 Class B Compliance and Restrictions This listing is for each. This item requires special shipping, additional charges may apply.

Technical Specification Pallet Rack Accessory Item Aisle Guard Overall Depth 1 Overall Width 96 Overall Height 60 Material Steel Color Yellow Finish Polyurethane For Use With Mounting Clips Mfr. No. RC0000, RC0400 and RC0600 Standards AWS Includes attaches to the back of the upright Pallet Rack Construction Teardrop This listing is for each. This item requires special shipping, additional charges may apply.

Technical Specification Transmitter Type Intrinsically Safe Differential Transmitter Wetted Materials - Transmitters Alumina Ceramic, Aluminum, Epoxy, Glass, Gold, Nickel, PVC, RTV, Silicon, Stainless Steel Range Values - Transmitter -2.5 to 0 to 2.5 Range Units - Transmitter In. H2O/In. H2O Accuracy - Transmitter +/-0.50% Electrical Connections - Transmitter 4 Pin M12 Connector Power Required - Transmitters 10 to 35VDC Process Connection Size - Transmitter 1/8 Process Connection Type - Transmitter FNPT Shape - Transmitter Rectangular Overall Height - Transmitter 5.43 Overall Width - Transmitter 4.72 Overall Depth - Transmitter 3.44 Connection Location - Transmitter Bottom Output - Transmitter 4 to 20mA DC Display - Transmitter 4 Digit LCD Operating Temp. - Transmitter 32 Degrees to 104 Degrees F Safety Rating - Transmitter Class I Div. 1 Groups A, B, C, D; Class II Div. 1 Groups E, F, G; Class III Div.1 Wiring Entry - Transmitter None Loop Resistance 0 to 1250 Ohm Includes Instructions This listing is for each.

Technical Specification Transmitter Type Pressure Transmitter Wetted Materials - Transmitters Stainless Steel Range Values - Transmitter 0 to 200 Range Units - Transmitter psi Accuracy - Transmitter +/-0.50% Full Scale Electrical Connections - Transmitter 4 Pin Hirschmann Style A DIN 43650-A Connector Power Required - Transmitters 9 to 36VDC Process Connection Size - Transmitter 1/8' Process Connection Type - Transmitter MNPT Output - Transmitter 4 to 20mA DC Operating Temp. - Transmitter -40 Degrees to 257 Degrees F Wiring Entry - Transmitter 1/2' FNPT Housing 304 Stainless Steel Loop Resistance Dependent on Loop Supply Voltage Max. Pressure (PSI) 400 Thermal Error +/-3% (-4 to 185F) Compatible With Any Process Compatible with 316Stainless Steel Includes Instructions Manufacturers Warranty Length 1 yr. This listing is for each.

Technical Specification Transmitter Type Pressure Transmitter Wetted Materials - Transmitters Stainless Steel Range Values - Transmitter 0 to 3000 Range Units - Transmitter psi Accuracy - Transmitter +/-1.00% Full Scale Electrical Connections - Transmitter 4 Pin M12 Connector Power Required - Transmitters 16 to 36VDC Process Connection Size - Transmitter 1/4 Process Connection Type - Transmitter MNPT Shape - Transmitter Irregular Overall Height - Transmitter 3.77 Overall Width - Transmitter 1.34 Overall Depth - Transmitter 3.05 Connection Location - Transmitter Bottom Output - Transmitter 4 to 20mA DC Display - Transmitter 4 Digit LED Operating Temp. - Transmitter -4 Degrees to 158 Degrees F Wiring Entry - Transmitter None Features Push Button Configuration, IP67 Rating, Combined Pressure Gauge, 4 to 20mA Transducer and Switch Loop Resistance Dependent on Loop Supply Voltage Housing Nickel Plated Aluminum Max. Pressure (PSI) 7500 Thermal Error +/-0.1% Full Scale Includes Instructions Manufacturers Warranty Length 1 yr. Display Units PSI This listing is for each. Process Connection Size - Transmitter : 1/4 Output : 4 to 20mA at 16 to 36VDC NEMA Rating : - Display - Transmitter : 4 Digit LED Display Units : psi Overall Height - Transmitter : 3.77 Display : 4 Digit LED Range Values - Transmitter : 0 to 3000 Shape - Transmitter : Irregular Power Required - Transmitters : 16 to 36VDC Power Required : 16 to 36VDC Process Connection : 1/4 NPT Male Lower Wetted Materials : Stainless Steel Item : Pressure Transmitter Manufacturers Warranty Length : 1 YEAR Overall Depth - Transmitter : 3.05 Accuracy : +/-1% Full Scale Process Connection Type - Transmitter : MNPT Compatible With : - Wetted Materials - Transmitters : Stainless Steel Housing : Nickel Plated Aluminum Range : 0 to 3000 Psi Electrical Connections : 4 Pin M12 Transmitter Type : Pressure Transmitter Operating Temp. : -4 to 158 F Features : Push Button Configuration, IP67 Rating, Combined

Techniks - 05932-480 - Tapping Collet, 0.480 in. Shank, ER32

Techniks 1/4" NPT SIze 2 ANSI Clutch Drive Tap Collet

TECHNIKS 15/32" HIGH PRECISION DA180 COLLET CNC CHUCK DOUBLE ANGLE HOLDER

Techniks 17/32" TG150 Collet Super Precision

Techniks 3/8" BT30 DualDRIVE End Mill Holder X 2.5" Length

Techniks 5/32" TG100 Collet Super Precision

Techniks CAT50 1" Rigid Reach Holder 8.0" Length

TECHNOCASE ABS

Tecumseh 570701 Spring Genuine Original Equipment Manufacturer (OEM) Part

Tecumseh OEM 640025C Carburetor Replaces 640025

TEFC motors are built according to NEMA specifications and designed for operation in moist or dust atmospheric conditions without affecting their useful life. Premium Efficiency WEG motors are tested according to IEEE 112 std., method 'B' and their efficiency values are certified by UL Labs (CSA C390). Motors will meet Design B torques, maintaining exceedingly high breakdown and locked rotor torque while providing the highest rated efficiency levels.

Teledyne 2400-058. TEMPERATURE CUT OUT SWITCH 24V

Teledyne 2400-552. TELEDYNE BOILER CONTROL SENSOR

Teledyne A0095704. Pump, 1/6hp, bronze fitted

Teledyne R10547608. Complete heat exchanger, copper tubes

TELEMECANIQUE ZB4BZ101, MOUNTING BASE WITH 1 N.O.CONTACT BLOCK

Telescoping Lighted Magnetic Pick-Up The #759582 Telescoping Lighted Magnetic Pickup is ideal for retrieving steel and iron parts from hard-to-reach or -see work areas. Features: Pickup powered by Neodymium donut magnet with 2 lb. pull Telescoping stainless steel arm with high-impact ABS plastic handle Long-life LED bulb Power source: Four "LR41"Alkaline batteries (included) Magnetic pull force: 2 lb. Arm length: 7-3/4 to 28-3/4 in. LED bulb life: 100,000 hours (typical) Battery life: 48 hours (typical)

TEMD5510FX01-VISHAY

Temp Control, W72 x H72, Single display 4 Digit, PID Control, Relay & SSR Output, 1 Alarm Output, 100-240 VAC

Temp. Control: Programmable, 8 segments ||

Tempco HD Cartridge Heater HDC20622 w/SS Braid 3/4"OD 3"L 240V 500W 85 Density Features: Diameter Inches: 3/4Length Inches: 3Type: High Density SwagedVoltage: 240Watts: 500Lead Length Inches: 12 w/ 10 BraidSheath Construction: 321 Stainless Steel

Tennant EX-SPOT-2 Portable Spot Extractor - 2 Gal. , 1 ea #9007502 Clean spots before they become stains with the portable spot extractor. Includes 4" stainless steel hand tool. Vacuum motor: 1.12 hp, 2 stage, 120V, 7A, 840 watts. Vacuum motor type: Peripheral discharge, bypass: 4.8 dia. Power cord: 25' SJTO. Perfect for use on spills and upholstery cleaning, auto detailing and many other applications.

Tennsco - ZLE5-9636A-3W - Add-On Boltless Shelving with Steel Wire Decking, 3 Shelves, 97W x 36-5/8D x 60H

TENNSCO SR58MG Steel Cabinet Shop Desk, 36w x 30d x 53-3/4h, Medium Gray

TEST LEAD STKG BANA-MINGRABR 24" (1 piece)

Test Leads 18" W/EACH END BLK

Test Leads 60" TEST LEAD BANANA

Test Leads ALLIGATOR CLIP PAT

Test Leads LOW VOLTAGE RETRAC

Test Leads MINGRABBER TEST C

Teva women's sandal

TEXAS INSTRUMENTS TPS51221RTVR Integrated Circuit New Lot Quantity-5

The 45 degree support assembly includes socket head cap screws, washers and T-nuts. The support assembly is pre-machined with counterbores and a 45 degree miter angle on both ends. This fastening method provides a clean, flush connection and is typically used to reinforce a 90 degree connection. This connection lends itself to applications with heavy loads to minimize beam deflection.

The ADAM-5000L/TCP is an Ethernet-based I/O system. Without a repeater, the ADAM-5000L/TCP can cover a communication distance up to 100 m. This allows remote configuration via Ethernet and eight PCs can simultaneously access the data. The ADAM-5000L/TCP is the solution for easy configuration and efficient management.

The Alpha Bravo Albany Slim Center Brief is from the Tumi? Bravo Collection.

The Amazing Quality Aluminum Clamp-on Rod Holders Model:  RA5204GL Color:   Gold Fits:      1.900" O.D. Pipe Mount:  Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.

The Amazing Quality Premier MDT Shaft, 6"

The Amerock BP1307ORB Brass and Sterling Traditions Round Knob has a Oil Rubbed Bronze finish. Refined elegance; soft curves contrasted with solid lines form a beautifully traditional aesthetic. The Oil Rubbed Bronze finish is a rich, dark brown old world finish with striking light and dark accents. Amerock markets decorative hardware solutions that inspire, coordinate and help express personal style. For the kitchen, bathroom and the rest of the home, with a variety of finishes and designs for all decorating tastes, Amerock is the ultimate, time-tested source for hardware needs. Amerock markets products in four categories: decorative hardware, decorative hooks, bath accessories and functional hardware.

The Brooks Instrument Flow Meter model 2510A2A14SVVT comes standard with a 2" Scale, for use on .4-5 LPM Air. This meter has a tube from Acrylic with 1/8" FNPT connection, Viton seals and Inlet Valve. Please Note: Image is for reference only. The Meter Described here is what you'll receive.

The C85 series conforms to ISO 6432 and CETOP RP52P. The C85 is available in bore sizes 8mm through 25mm with standard strokes ranging from 10mm through 300mm. A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments. With abrasion resistant packings and replaceable nose seals, the C85 offers exceptional service life.<ul><li>Double acting, single rod, crimped cylinder</li><li>Conforms to ISO 6432 and CETOP RP52P</li><li>Bore sizes *: 8, 10, 12, 16, 20, 25</li><li>Standard strokes up to 300mm</li><li>Auto switch capable</li></ul>

The Cable Management Arm that doesn't sag. Features: Secure equipment and network cables. Compatible with most equipment, including equipment from Dell , HP , and IBM . Significantly smaller than other cable management arms so it doesn't sag. Mounts on left or right side of rack. Guaranteed for life! Designed for equipment with slide rails. Extends from 28.5" to 33". Fully adjustable. Compatible with standard square or round hole 19" racks. Measures 1U high.

The Carlisle Vee-Rib belt is ideally suited for high speed and high drive ratio applications that conventional V-belts just can?t handle. The Carlisle Vee-Rib belt offers smooth, vibration-free performance in a single, compact drive belt. Vee-Rib belts allow the design of compact, vibration-free drives that are resistant to heat and abrasion for longer belt life.

The cart features snap on use Risers utilizing carts must be ordered with cart kits Order Now Hgt.: 10" Wt.(lbs.) Ea.: 115 Length: 60" Level: 30"

The CK1 series is a clamp cylinder available in two styles of clevis widths *. It is a non-lube, compact, lightweight cylinder with a built-in speed controller. Gaiters are unnecessary because a heavy-duty coil scraper is provided as a countermeasure against spatters. The CK1 is available in 3 bore sizes with stroke lengths up to 150mm. Options include rod attachments and auto-switch capabilities.<ul><li>Two styles of clevis widths *</li><li>Built-in speed controller</li><li>Heavy duty coil scraper</li><li>Piping entry orientation can be selected as required</li><li>Compact and lightweight</li></ul>

The CM2 series is our 2 flute general purpose chamfer mill for chamfering and profiling in a wide variety of materials, such as plastic, aluminum, steel, and high temp alloys.TOOL SPECS: 2 Fl, 30? HLX | ?.625 IN. | .75 IN. LOC | .625 IN. SHK | 3.0 IN. OAL | 90.0? INCL POINT | AlTiN COATED | CARBIDE CHAMFER MILL Manufactured in the USA! Model #: CMS20625X

The CM4 series is our 4 flute general purpose chamfer mill for chamfering and profiling in a wide variety of materials, such as plastic, aluminum, steel, and high temp alloys.TOOL SPECS: 4 Fl, 30? HLX | ?.375 IN. | .625 IN. LOC | .375 IN. SHK | 2.0 IN. OAL | 90.0? INCL POINT | AlTiN COATED | CARBIDE CHAMFER MILL Manufactured in the USA! Model #: CMS40375X

The CQS compact cylinder is available for those small bore cylinder applications where saving space is a concern. The CQS offers standard long strokes * in four bore sizes from 12 to 25mm. Long stroke versions incorporate a wear band and thicker piston to handle the increased bearing needs of the longer strokes. Both switch capable and non-switch capable body styles are the same, and switches can be mounted on three * and four * sides. An increased side load version * is available for more demanding applications. <ul><li>Anti-laterial load</li><li>Bore sizes: 12, 16, 20, 25 *</li><li>Strokes: 5mm through 50mm depending upon bore size</li><li>Mounts: through hole, both ends tapped, foot, front or rear flanges, double clevis</li><li>Variety of switches and a variety of lead wire lengths</li></ul>

The D8HT12TB from Speco is a 8 channel IP, HD-TVI & analog full hybrid digital video recorder, 12TB. Features Video Out: 1 HDMI, 1 VGA, 1 CVBS / Spot 2MP support for HD-TVI Real-time recording rate at 30fps/channel on IP / HD-TVI / Analog Up to 5MP IP camera resolution on all channels 1080p@30fps on HD-TVI channels Plug & play feature with Speco?s OnSIP/VIP/ZIP cameras Each channel is configurable for either IP / HD-TVI / analog Dual network ports for isolating IP camera network and remote network traffic Instant playback allows for playback of 1 channel while the rest stays in Live mode Smart (Museum) Search - Quickly search for a specific video event without the need for motion setup. H.264 video compression Networkable full hybrid DVR with free Speco DDNS server Backwards compatible with all analog cameras UTC function allows for zoom/focus and OSD control over coax Signal distance up to 1600 feet1 Digital Deterrent for triggering audio message via motion detection or sensor Cloud upload for events via Google Drive Mass alert notification via Twitter 2-way audio communication via local and IP camera audio service Programmable recording on motion detection, sensor, schedule, continuous and manual Supports wireless access point for viewing and configuration HTTPS ? support for third party SSL certificates. Built-in S.M.A.R.T. Technology (Self-Monitoring, Analysis and Reporting Technology for HDD) Switch between low and high quality stream for IP cameras during simultaneous Continuous + Motion or Continuous + Sensor recording modes for storage optimization Easy firmware upgrade by USB port or network User Access: up to 12 concurrent users Remote monitoring / recording / playback / configuration / software upgrades and PTZ control via internet Network software supports Static IP, DHCP and DDNS Network accessible via SpecoTech Multi-Client Software, Secure Guard VMS, Internet Explorer Web-Viewer and Speco Player Mobile Viewer.

The double fabric cover construction means longer, more dependable performance. It provides positive flex fatigue characteristics and extends load life capacity. Resistance to oil, heat, weather and aggressive environmental conditions is outstanding. Carlisle Super Blue Ribbon V-Belts operate within a wide range of load capacities and speeds ? with rated performance from 100 to 8,000 RPM with horsepower capability from 1 to 1,100 horsepower. Super Blue Ribbon is the ideal choice for dependable performance on an extremely wide range of applications ? A, B, C, D, and E sections ? single or multiple drive.

The DS9093S+ allows the user to permanently attach an iButton to an object with one screw or rivet. The plastic plate is designed with an inset that accommodates the flange of the F5 package and allows for flush mounting. A protective wall is provided along the sides of the plate to reduce incidental damage to the iButton.

The DS9097U is a RS-232 to 1-Wire adapter, which performs RS-232 level conversion and actively generates the 1-Wire communication signals. Together with an adequate TMEX software driver it enables an IBM-compatible PC to directly communicate with any 1-Wire device connected to the adapter's RJ-12 port. The DB-9 version reads and writes any non-EPROM 1-Wire device. All DS9097U adapters are based on the DS2480B serial 1-Wire line driver chip and therefore are not a plug-in replacement for the DS9097 or DS9097E. The RXD/TXD Polarity Select input of the DS2480B is tied to Vdd (non-inverting). The DS9097U communicates with 1-Wire devices at regular speed as well as overdrive speed. The serial port must support a data transmission rate of 9600bps. Under software control, the adapter can be set up for RS-232 data rates of 19200, 57600 and 115200bps. The two higher rates are recommended for communication at overdrive speed with overdrive capable devices. Since the DS9097U operates in a byte mode, every data byte received from the RS-232 port generates eight time slots on the 1-Wire line.

The DT8 is a self-powered rate indicator which features selectabletimebase increments by setting the appropriate DIP switches on the rear of the unit. The internal 3.0 VDC lithium battery will operate continuously for at least 7 years. It has a 5-digit LCD display with 0.6 inch (15.2mm) high digits. The unit is constructed of a lightweight, high impact plastic case with a clear viewing window. The sealed front panel meets NEMA 4X/IP65 specifications for wash-down and/or dusty environments, when properly installed. The optional Micro Line/Sensor Power Supply (RLMLPS10000) is designed to attach to the rear of an installed DT8. The optional supply can be powered from an 85 to 250 VAC source, and can provide power for the backlighting of a unit and most sensors.

The dustpan is attached to a 32" aluminum handle and has a 12" x 11" plastic hopper that swings freely or locks upright. For use with lobby broom NSN 7920-01-572-7349.