height_Attrib: Outside Dia.

Products with this attribute (900 total)

SPEC, Heavy Duty, Music Wire, Compression Spring - 54NC33|C04800721000M - Grainger

SPEC, High Precision, 302 Stainless Steel, Extension Spring - 781V14|E12501155000S - Grainger

SPEC, Metric - Looped End Extension, Stainless Steel, Metric Extension Spring - 782EA8|EM1402800117S - Grainger

SPEC, Metric - Looped End Extension, Stainless Steel, Metric Extension Spring - 782EN5|EM2402200408S - Grainger

SPEC, Metric - Looped End Extension, Stainless Steel, Metric Extension Spring - 782EV3|EM3204500402S - Grainger

SST 18-8 Hex Female Standoff 3/16" OD, 0.375" Long, 2-56 Thrd

Standard Type Crossed Roller Bearings, , High Carbon Steel, Open, Large Clearance

Standard Type Crossed Roller Bearings, Steel Cage, High Carbon Steel, Open, Small Clearance

Standoff, Rnd, Brs, 5/16-18x1 1/2, Pk2

Steel Hex Female Standoff 1/4" OD x 0.437" Length x 10-32 Thread

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Swage Spacer 0.25 RD x 0.187 L x 0.114 ID, 0.139 x 0.165 Shank, AL

Testing Sieve, Brass/SS, 16mm

Testing Sieve, Brass/SS, 19MM

Testing Sieve, Brass/SS, 37.5mm

This Ruland double friction bearing universal joint has 0.7500" x 18mm bores, a 1.495" (38.0mm) outer diameter, and a 6.563" (166.7mm) length. It is ideal for applications with wide distances between shafts and can accommodate all forms of misalignment. This double universal joint is made of two blocks, four pins, one center spacer, and two yokes. These components are manufactured to tight tolerances using proprietary processes that ensure smooth operation and high misalignment accommodation up to 90?, which is a significant improvement over commodity style double universal joints. It is made from high grade alloy steel for high torque capabilities. The user can add boots to protect the joints from unwanted contaminants and increase service life. This double friction bearing universal joint is manufactured in the USA by Belden Universal and rebored by Ruland for the shortest lead time in the industry.

This Ruland double friction bearing universal joint has 9mm x 9mm bores, a 18.9mm outer diameter, and a 96.9mm length. It is ideal for applications with wide distances between shafts and can accommodate all forms of misalignment. This double universal joint is made of two blocks, four pins, one center spacer, and two yokes. These components are manufactured to tight tolerances using proprietary processes that ensure smooth operation and high misalignment accommodation up to 90?, which is a significant improvement over commodity style double universal joints. It is made from high grade alloy steel for high torque capabilities. The user can add boots to protect the joints from unwanted contaminants and increase service life. This double friction bearing universal joint is manufactured in the USA by Belden Universal and rebored by Ruland for the shortest lead time in the industry.

This Ruland double friction bearing universal joint with set screws has 0.8750" x 0.7500" bores, a 1.495" outer diameter, and a 6.563" length. It is ideal for applications with wide distances between shafts and can accommodate all forms of misalignment. This double universal joint is made of two blocks, four pins, one center spacer, and two yokes. These components are manufactured to tight tolerances using proprietary processes that ensure smooth operation and high misalignment accommodation up to 90?, which is a significant improvement over commodity style double universal joints. It is made from stainless steel for corrosion resistance. The user can add boots to protect the joints from unwanted contaminants and increase service life. This double friction bearing universal joint is manufactured in the USA.

This Ruland double friction bearing universal joint with set screws has 1.0000" x 20mm bores, a 1.745" (44.3mm) outer diameter, and a 7.750" (196.9mm) length. It is ideal for applications with wide distances between shafts and can accommodate all forms of misalignment. This double universal joint is made of two blocks, four pins, one center spacer, and two yokes. These components are manufactured to tight tolerances using proprietary processes that ensure smooth operation and high misalignment accommodation up to 90?, which is a significant improvement over commodity style double universal joints. It is made from stainless steel for corrosion resistance. The user can add boots to protect the joints from unwanted contaminants and increase service life. This double friction bearing universal joint is manufactured in the USA.

This Ruland double friction bearing universal joint with set screws has 28mm x 28mm bores, a 50.7mm outer diameter, and a 220.7mm length. It is ideal for applications with wide distances between shafts and can accommodate all forms of misalignment. This double universal joint is made of two blocks, four pins, one center spacer, and two yokes. These components are manufactured to tight tolerances using proprietary processes that ensure smooth operation and high misalignment accommodation up to 90?, which is a significant improvement over commodity style double universal joints. It is made from high grade alloy steel for high torque capabilities. The user can add boots to protect the joints from unwanted contaminants and increase service life. This double friction bearing universal joint is manufactured in the USA.

This Ruland single friction bearing universal joint has 0.3750" x 0.3750" bores, a 0.995" outer diameter, and a 3.380" length. It is best suited for applications requiring a short length and high torque (when compared to double universal joints of an equivalent OD). This single universal joint is made of a block, two pins, and two yokes. These components are manufactured to tight tolerances using proprietary processes that ensure smooth operation and high misalignment accommodation up to 45?, which is a significant improvement over commodity style single universal joints. It is made from stainless steel for corrosion resistance. The user can add a boot to protect the joint from unwanted contaminants and increase service life. This single friction bearing universal joint is manufactured in the USA.

This Ruland single friction bearing universal joint has 14mm x 0.5000" bores, a 1.245" (31.6mm) outer diameter, and a 3.750" (95.3mm) length. It is best suited for applications requiring a short length and high torque (when compared to double universal joints of an equivalent OD). This single universal joint is made of a block, two pins, and two yokes. These components are manufactured to tight tolerances using proprietary processes that ensure smooth operation and high misalignment accommodation up to 45?, which is a significant improvement over commodity style single universal joints. It is made from high grade alloy steel for high torque capabilities. The user can add a boot to protect the joint from unwanted contaminants and increase service life. This single friction bearing universal joint is manufactured in the USA.

This Ruland single friction bearing universal joint has 6mm x 6mm bores, a 12.6mm outer diameter, and a 50.8mm length. It is best suited for applications requiring a short length and high torque (when compared to double universal joints of an equivalent OD). This single universal joint is made of a block, two pins, and two yokes. These components are manufactured to tight tolerances using proprietary processes that ensure smooth operation and high misalignment accommodation up to 45?, which is a significant improvement over commodity style single universal joints. It is made from stainless steel for corrosion resistance. The user can add a boot to protect the joint from unwanted contaminants and increase service life. This single friction bearing universal joint is manufactured in the USA.

TUBE,1/4 IN INSIDE DIA,100 FT L,CLEAR

Tubing, 1/16 I.D., 100 ft., Clear, Flexible

Tubing, 20mm I.D., 100 ft., Clear, Flexible

Tubing, 3/16 I.D., 100 ft., Green, Flexible

Tubing, 3/32 I.D., 100 ft., Red, Flexible

Type Crossed Roller Bearings, Separator, High Carbon Steel, Open, Pre Load

Type Crossed Roller Bearings, Separator, High Carbon Steel, Open, Small Clearance

Type Crossed Roller Bearings, Separator, High Carbon Steel, Sealed, Pre Load

Type High Rigidity Crossed Roller Bearings, Separator, High Carbon Steel, Sealed, Pre Load, Counter Bored Mounting Holes in Opposite Direction

Water Suction Hose, 20 ft., 1 in. I.D.

Weld Tubing, 4mm ID, Black, 100 Ft.

Weld Tubing, 6.5mm ID, Blue, 100 Ft.

Weld Tubing, Poly, 3/8 In OD, Black, 50 Ft

Weld Tubing, Poly, 3/8 In OD, White, 500 Ft

WIRE ROPE, BRIGHT, UNCOATED, 6 X 25 STRAND, 1300 FT X 1/2 IN, STEEL