The FM1 series timer modules are designed to be integrated inside of a machine control panel, circuit board, or other equipment. They are a simple and low cost alternative for applications that do not require more than 21 A or 2 HP, 240 VAC. The FM1 is designed for 24-hour or 7-day control or overriding a functional typical state of a heating, ventilation, refrigeration, lighting, security, or pump system. The FM1 series is ideal for 12, 24 VAC/VDC,120 or 208/240VAC single-phase general applications.
The G-Floor Cover and Protector is manufactured from tough, specially formulated polyvinyl that is resistant to most contaminants commonly found in garage and work environments. It helps prevent concrete deterioration, hides cracks and stains, prevents new stains and creates a moisture barrier. Easy to install, just roll it out and trim if needed. Use one mat for single area protection or multiple mats to provide wall to wall coverage. G-Floor is 100% high quality polyvinyl, not layered with filler material that can crack, split, peel and deteriorate. Tough enough to be used in the garage, attractive enough to be used anywhere; basements, laundry rooms, trailers, vehicles, workshops, warehouses, exercise rooms, offices and utility rooms.
The G-Floor Cover and Protector is manufactured from tough, specially formulated polyvinyl that is resistant to most contaminants commonly found in garage and work environments. It helps prevent concrete deterioration, hides cracks and stains, prevents new stains, and creates a moisture barrier. Easy to install, just roll it out and trim if needed. Use one mat for single area protection, or multiple mats to provide wall to wall coverage. G-Floor is 100% high quality polyvinyl, not layered with filler material that can crack, split, peel, and deteriorate. Tough enough to be used in the garage, attractive enough to be used anywhere; basements, laundry rooms, trailers, vehicles, workshops, warehouses, exercise rooms, offices, and utility rooms.
The Malibu is the most convenient go-anywhere picnic pack you can find. Fully insulated, it's made of 600D polyester and comes with deluxe picnic service for two. The Malibu features an insulated and divided wine section for two bottles and a removable water-resistant liner in the food storage area. Its amenities include: 2 plates (melamine, 9"), 2 wine glasses (PS, 8 oz.), 4 napkins (100% cotton, 14" x 14"), 2 (18/0) stainless steel forks, knives, and spoons, 1 hardwood cutting board (6" x 6"), 1 stainless steel cheese knife with wooden handle, and 1 stainless steel waiter-style corkscrew. The Malibu is great for the beach, concerts, and casual picnics. Dimensions: 15 x 9 x 11 inches.
The MOTU <b>AVB Switch</b> is a six-port Gigabit AVB Ethernet switch that turbocharges your ethernet network for audio and video. Audio Video Bridging (AVB) is the IEEE 802.1 extension to Ethernet specifically engineered for real-time, low-latency, fully synchronized streaming of audio and video over Ethernet. AVB fulfills the promise of a true A/V standard that brings together the worlds of networking technology and professional audio/video.</p><p><b>IEEE 802.1 compliant AVB networking</b><br />The MOTU AVB Switch™ allows you to quickly and easily build an AVB-compliant Ethernet network for audio (and video), with six 1-Gigabit AVB ports for any AVB devices (even other switches) and support for standard Ethernet operation on the same network. Enjoy the many benefits of AVB, including plug-and-play operation, guaranteed quality of service, and self-regulated network resource management.</p><p><b>Plug-and-play operation</b><br />Connect MOTU AVB devices with standard shielded CAT-5e or CAT-6 cables and go. The MOTU AVB Switch supports automatic device discovery and network bandwidth management among connected AVB devices. No IT expertise required.</p><p><b>Standard cabling</b><br />Use standard CAT-5e or CAT-6 Ethernet cables up to 100 meters long between the MOTU AVB Switch and other AVB devices or switches.</p><p><b>1-Gigabit operation</b><br />1-Gigabit operation means you make the most of what AVB has to offer, with very high audio channel counts and very low network latency.</p><p><b>Network-wide clock and sync</b><br />AVB provides a network-wide time base for better-than-sample-accurate phase lock across all connected devices. Timing accuracy is down to the nanosecond. In a MOTU AVB system, network-wide sync can be established with one click.</p><p><b>Support for standard Ethernet</b><br />An AVB network fully supports standard ethernet, for connecting standard ethernet devices like the Apple AirPortr or other Wi-Fi routers, Ethernet hubs, and even entire Ethernet networks in your home, office or studio. All ports on the MOTU AVB Switch support standard Ethernet devices. You can also designate any port for non-AVB operation, if needed.</p><p><b>High capacity with flexible topology</b><br />Theoretically, you could connect up to 150 MOTU AVB devices using 37 MOTU AVB switches. You can run as many as 512 AVB audio streams across the network simultaneously. That's 4,096 audio channels with 8-channel streams, or 8,192 channels with 16-channel streams. Please note: your network performance may vary, depending on the specific topology, devices connected and other factors.</p>
The Muxlab <b>500734</b> 6G-SDI Extender over Fiber Optic with Return Channel is a unique solution from MuxLab for extending SDI cameras or other SDI sources in up to 4K resolutions to a distance of up to 400m (1300ft) using OM4 multi-mode fiber (model 500734), 10km (33,000ft) using single-mode fiber (model 500734-SM10), 40km (132,000ft) using single-mode fiber (model 500734-SM40), and 80km (264,000ft) using single-mode fiber (model 500734-SM80).</p><p>The product supports multichannel transmission, and can simultaneously transmit up to 9Gbps of data throughput over the fiber link, and allows for versatile combinations of sources, including 6G-SDI, 3G-SDI and HD-SDI. The unit supports simultaneous transmission of mixed signals such as one 6G-SDI signal + one 3G-SDI, or two 3G-SDI signals + two HD-SDI signals, and many other combinations up to 9Gbps. The device supports one input and one output SDI port, plus three directional SDI ports that can be individually configured as input or output. This flexibility allows for up to four source ports and one return channel, or up to one source port and four return channels, or anything in between. The SDI return channel may be used for AV monitoring and talk-back, while the RS232 pass-through supports return of tally light, camera control unit (CCU) and control of end devices.</p>